Aigo AM12PRO

Contents

Aigo AM12PRO RGB Fan Instruction Manual

Introduction

Thank you for choosing the Aigo AM12PRO RGB Fan. This manual provides detailed instructions for the installation, operation, and maintenance of your new PC cooling fan. The AM12PRO series offers efficient cooling and vibrant ARGB lighting to enhance your computer system's aesthetics and performance.

Video: Overview of the Aigo AM12PRO RGB Fan in a PC build, showcasing various lighting effects and fan configurations.

Specifications

The Aigo AM12PRO RGB Fan is designed for optimal performance and aesthetic appeal. Below are the key specifications:

FeatureSpecification
Model NumberAM12PRO
Dimensions120x120x25mm
Weight180g
Fan Speed800-1600 (±10%) RPM
Noise Level26dBA (Max) / 27.3dBA (Max)
Air Volume81.6 CFM (Max)
Wind Pressure1.75mmH2O
Bearing TypeFluid Bearing / Hydro Bearing
Current0.13A / 0.16A
Voltage12V
Rated Power5.04W
Fan Life100,000 hrs
Power Interface3pin/4pin, 5v-3pin ARGB
Used ForCase, Radiator
Blade Quantity7
CertificationCE, FCC, RoHS
Aigo AM12PRO fan dimensions

Image: Detailed dimensions of the Aigo AM12PRO fan (120mm x 120mm x 25mm).

Package Contents

Depending on the kit purchased, your package may include:

  • Aigo AM12PRO RGB Fans (quantity varies: single, 3-pack, 4-pack, 5-pack, etc.)
  • Mounting Screws
  • Optional: ARGB Controller (if purchased separately or included in specific kits)
Aigo AM12PRO RGB Fan kit packaging

Image: Aigo AM12PRO RGB Fan kit showing multiple fans and packaging.

Setup & Installation

1. Physical Installation

  1. Prepare the Fans: Each AM12PRO fan is equipped with cushioned foot pads to reduce resonance noise between the fan and the chassis. Ensure these are properly seated.
  2. Mounting: Position the fans in your PC case or on your radiator. Ensure the correct orientation for desired airflow. Typically, fans are installed to draw cool air into the case (intake) or expel hot air out (exhaust). Use the provided screws to secure the fans firmly.
Aigo AM12PRO fan with anti-vibration mat detail

Image: Close-up of an Aigo AM12PRO fan highlighting the anti-vibration mat on the corners.

Aigo AM12PRO fan airflow direction

Image: Diagram illustrating the airflow direction of the Aigo AM12PRO fan (air in front, air out back).

2. Wiring Connections

The AM12PRO fans utilize two main connectors for functionality:

  • 4-pin PWM Connector: For fan speed control.
  • 5V 3-pin ARGB Connector: For addressable RGB lighting control.
Aigo AM12PRO fan 4-pin PWM and 5V 3-pin ARGB connectors

Image: Connectors for the Aigo AM12PRO fan, showing the 4-pin PWM for power and the 5V 3-pin ARGB for lighting.

  1. Connect PWM: Connect the 4-pin PWM cable from each fan to an available 4-pin fan header on your motherboard (e.g., CPU_FAN, SYS_FAN). This allows your motherboard to control the fan speed based on system temperature.
  2. Connect ARGB: Connect the 5V 3-pin ARGB cable from each fan to a compatible 5V 3-pin ARGB header on your motherboard. Ensure correct alignment to avoid damage. This enables synchronization of lighting effects with your motherboard's software.
  3. Multiple Fans / Controller: If installing multiple fans, they can often be daisy-chained together or connected to a dedicated ARGB controller/hub. Refer to the diagrams below for common connection scenarios. If using an external controller, connect the fans to the controller and the controller to your power supply (usually via SATA power) and motherboard (for ARGB sync, if supported).
Wiring diagram for three Aigo AM12PRO fans

Image: Wiring diagram for connecting three AM12PRO fans in series to a motherboard or controller, showing 5V 3-pin ARGB and PWM connections.

Wiring diagram for five Aigo AM12PRO fans

Image: Wiring diagram for connecting five AM12PRO fans in series to a motherboard or controller, showing 5V 3-pin ARGB and PWM connections.

Operating Instructions

1. Fan Speed Control (PWM)

The AM12PRO fans support PWM control, allowing for precise adjustment of fan speed. This can be configured through:

  • Motherboard BIOS: Access your motherboard's BIOS settings to set custom fan curves based on CPU or system temperatures.
  • Motherboard Software: Many motherboard manufacturers provide software (e.g., ASUS AI Suite, MSI Dragon Center, Gigabyte SIV) that allows for fan speed control directly from your operating system.

2. ARGB Lighting Control

The addressable RGB lighting of the AM12PRO fans offers a wide range of customization options:

  • Motherboard Synchronization: If connected to a 5V 3-pin ARGB header, you can synchronize the lighting effects with other ARGB components using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion). This allows for effects such as breathing, color cycle, rainbow, comet, jump flicker, wave, and flicker yo-yo.
  • External ARGB Controller: If your motherboard does not have a 5V 3-pin ARGB header, or if you prefer dedicated control, an external ARGB controller (sold separately) can be used. Refer to the controller's manual for specific instructions on changing lighting modes and colors.
Aigo AM12PRO fan ARGB lighting effects

Image: Aigo AM12PRO fan showcasing vibrant ARGB lighting effects.

Maintenance

To ensure the longevity and optimal performance of your Aigo AM12PRO fans, follow these simple maintenance guidelines:

  • Regular Cleaning: Periodically clean the fan blades and housing to prevent dust buildup. Dust can impede airflow, reduce cooling efficiency, and potentially increase noise levels. Use compressed air or a soft brush to gently remove dust.
  • Bearing: The fans feature a high-quality hydraulic bearing designed for long life and quiet operation. These bearings are self-lubricating and do not require additional maintenance or lubrication.

Troubleshooting

If you encounter any issues with your Aigo AM12PRO fans, refer to the following troubleshooting steps:

  • Fan Not Spinning / No Power:
    • Check all 4-pin PWM power connections to ensure they are securely plugged into the motherboard headers or controller.
    • Verify that the fan headers are enabled in your motherboard's BIOS settings.
    • If using an external controller, ensure it is properly powered (e.g., via SATA power) and connected to the fans.
  • RGB Lighting Issues (Incorrect Colors, No Light, Partial Lighting):
    • Ensure the 5V 3-pin ARGB connector is correctly aligned and securely plugged into a 5V 3-pin ARGB header. Connecting to a 12V RGB header can damage the LEDs.
    • Check your motherboard's RGB software settings for proper ARGB configuration and selected lighting modes.
    • If fans are daisy-chained, check connections between each fan for any loose pins. A faulty connection in the chain can affect subsequent fans.
    • If using an external controller, ensure it is functioning correctly and its settings are properly configured.
  • Excessive Noise:
    • Ensure all fans are securely mounted to the case or radiator. Loose mounting can cause vibrations and noise.
    • Check for any cables or obstructions that might be hitting the fan blades.
    • Adjust fan speed settings in your motherboard's BIOS or software to a lower RPM if temperatures allow.

User Tips

Based on feedback from other users, here are some helpful tips for your Aigo AM12PRO fans:

  • Airflow Optimization: For optimal cooling performance, plan your case's airflow carefully. A common and effective setup is to have intake fans at the front/bottom and exhaust fans at the rear/top.
  • Controller Necessity: If your motherboard does not have a 5V 3-pin ARGB header, an external ARGB controller is essential to control the lighting effects. Without it, the RGB functionality will not work.
  • Packaging Inspection: Upon receiving your order, carefully inspect the packaging and contents for any damage. Some users have reported minor damage to components like radiators due to transit.
  • Compatibility: While generally compatible, always check your motherboard's manual for specific fan header types (PWM, ARGB) and their locations to ensure seamless integration.

Warranty & Support

For detailed warranty information, technical support, or any further inquiries regarding your Aigo AM12PRO RGB Fan, please refer to the official Aigo website or contact your retailer directly. A comprehensive user manual in PDF format is also available for download: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.