DERAPID 300Mbps WiFi Repeater User Manual

1. Introduction

The DERAPID 300Mbps WiFi Repeater is designed to extend the coverage and improve the signal strength of your existing wireless network. With a high transmission rate of 300 Mbps and compatibility with 802.11n standards, it provides reliable and stable internet connections for various devices in your home or office. Its easy setup process ensures a hassle-free experience, allowing you to quickly boost your Wi-Fi signal.

2. Product Overview

2.1 Key Features

• High Wi-Fi Transmission Rate: Up to 300 Mbps for fast internet speeds.
• Wi-Fi 802.11n Standards: Ensures reliable and stable connections.
• Easy Setup: Simple and intuitive configuration.
• Universal Compatibility: Works with any standard Wi-Fi router and all Wi-Fi enabled devices.
• Signal Amplification: Boosts wireless signal and extends range.
• WPS Support: Simplifies secure connection setup.
• Single-Band 2.4GHz: Dedicated to the 2.4GHz frequency band.
• CE Certified: Ensures product safety and quality.

2.2 Package Contents

• 1 x DERAPID 300Mbps WiFi Repeater
• 1 x User Manual (this document)

Figure 1: DERAPID 300Mbps WiFi Repeater

Note: While some product images may show 4 antennas, this product typically features 2 antennas.

3. Specifications

Available with EU or US plug types. Please ensure you have the correct plug type for your region.

4. Setup Instructions

Follow these steps to set up your DERAPID WiFi Repeater. For a visual guide, please refer to the setup video below.

4.1 PC Setup Guide (Video)

4.2 Step-by-Step Setup (PC)

1. Power On: Plug the WiFi Repeater into a power outlet.
2. Connect to Extender SSID: On your computer or smartphone, connect to the Wi-Fi network broadcast by the repeater. The SSID (network name) is typically "wifi-xxxx" and can be found on a label on the back of the product. The last four characters (xxxx) are usually derived from the device's MAC address.
3. Access Setup Page: Open a web browser (e.g., Google Chrome, Firefox) and enter the default IP address 192.168.188.1 in the address bar.
4. Login: When prompted, enter the default login credentials. The username is admin and the password is admin.
5. Scan for Host Router: The repeater interface will scan for available Wi-Fi networks. Select your main host router's SSID from the list. If your router's SSID is not visible, try scanning again or ensure your router is within range.
6. Enter Host Router Password: Input the Wi-Fi password for your main host router. Ensure the password is correct to establish a successful connection.
7. Configure Extender SSID and Password: You can either customize a new SSID and password for the extended network (e.g., "YOUR_ROUTER_NAME-PRO") or keep the default settings. It is recommended to use a distinct name to easily identify the extended network.
8. Review and Connect: Verify the settings you've entered, then click "Start Connect" or a similar button to apply the changes.
9. Wait for Connection: The repeater will now attempt to connect to your host router and establish the extended network. This process may take approximately 60 seconds. The LED indicator light on the repeater should change from blue to green, indicating a successful connection.

Figure 2: Universal Compatibility

5. Operating Modes

The DERAPID WiFi Repeater supports multiple operating modes to suit different networking needs.

5.1 Repeater Mode

In Repeater Mode, the device extends the coverage of an existing wireless network. It receives the Wi-Fi signal from your main router and re-broadcasts it, effectively eliminating Wi-Fi dead zones and improving signal strength in areas with weak coverage.

5.2 AP Mode (Access Point Mode)

In AP Mode, the device connects to a wired network (e.g., via an Ethernet cable from your main router) and transforms it into a wireless access point. This allows wireless devices to connect to the wired network. This mode is ideal for creating a new Wi-Fi hotspot in a hotel room or office where only a wired connection is available.

Figure 3: Application of Multiple Modes (AP Mode, Repeater Mode)

6. User Tips

• Optimal Placement: Place the repeater halfway between your router and the area where you need improved Wi-Fi coverage. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
• Avoid Overuse: To prolong the life of the repeater, avoid using it continuously for more than 24 hours. Unplug it from the power supply when not needed for extended periods.
• Dedicated Power Outlet: If you experience intermittent disconnections, try plugging the repeater into its own dedicated power outlet, separate from other devices.
• Password Management: When setting up, ensure your host router's Wi-Fi password does not contain special characters like ~!@#$%^&*(), as some repeaters may not recognize them.

7. Troubleshooting

If you encounter issues with your WiFi Repeater, refer to the following common problems and solutions:

1. Cannot see WiFi Repeater SSID on device:
   • Check if the second indicator light on the repeater is flashing. If not, long-press the reset button for 10 seconds to reset the repeater.
   • Ensure the repeater is powered on correctly.
2. Cannot access setting page (192.168.188.1):
   • Try using a different web browser (e.g., Google Chrome, Firefox).
   • If setting up on a computer, verify your computer's IP address settings.
   • Ensure your device is connected to the repeater's SSID.
3. Cannot connect to the internet after setup:
   • Verify that you entered the correct password for your host router during setup.
   • Check if your host router's password contains special characters (e.g., ~!@#$%^&*()). If so, change your router's password to one without these characters, as the repeater may not identify them.
4. Intermittent automatic disconnection:
   • Ensure the repeater is not sharing a power outlet with other high-power devices. It is best for the repeater to operate on an individual outlet.
   • Check for sources of interference (e.g., microwaves, cordless phones, thick walls).
5. Repeater not working wirelessly:
   • Check if the wireless indicator (second indicator light) is flashing. If not, reset the repeater by long-pressing the reset button for 10 seconds while powered on.
6. How to reset the repeater:
   • With the repeater powered on, long-press the reset button for 10 seconds. This will restore the device to its factory default settings.

8. Maintenance

Proper maintenance ensures the longevity and optimal performance of your WiFi Repeater.

• Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosol sprays.
• Environment: Keep the repeater in a dry place, away from water, excessive humidity, and extreme temperatures.
• Ventilation: Ensure the ventilation holes are not blocked to prevent overheating.
• Storage: If not in use for an extended period, unplug the device and store it in a cool, dry place.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or refer to the product's official website. Keep your purchase receipt as proof of purchase for any warranty claims.