1. Introduction
The WELLMEET WM-LM052 is a versatile Zigbee 3.0 Five-in-One LED Controller designed for smart lighting systems. It supports various LED strip types including single color, CCT (Color Temperature Adjustable), RGB, RGBW, and RGB+CCT, offering flexible control over your lighting. This controller integrates with smartphone applications (Tuya/Graffiti Smart App) and popular voice assistants like Amazon Alexa and Google Assistant, providing convenient and intelligent control options. This manual provides essential information for safe installation, operation, and maintenance of your LED controller.
2. Safety Information and Precautions
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- This product should be debugged and installed by personnel with professional qualifications.
- The product is not waterproof. It must be protected from direct sunlight and rain. For outdoor installations, use a waterproof enclosure.
- Ensure good heat dissipation conditions. Install the product in a well-ventilated environment to extend its service life.
- Do not install or use this product in areas prone to lightning, strong magnetic fields, or high voltage.
- Verify that the output voltage of the LED power supply used meets the requirements of the product's voltage range (DC12V-24V).
- The diameter and size of the wires used must be sufficient to handle the load of the connected LED lighting fixtures. Ensure wiring is secure to prevent accidents caused by heat or poor contact.
- Before powering on and debugging, ensure all wiring is correct to avoid damage to the lighting fixtures due to wiring errors.

3. Product Overview
The WM-LM052 controller is a compact device designed for seamless integration into your smart lighting setup. It features clearly labeled input and output terminals, a pilot lamp for status indication, and a SET button for pairing.



4. Specifications
| Feature | Specification |
|---|---|
| Model Number | WM-LM052 |
| Brand Name | WELLMEET |
| Item Type | Dimmers |
| Input Voltage | DC12V ~24V (5.5*2.1mm connector) |
| Output Current | 6A/Channel |
| Total Output Max | 15A |
| Working Temperature | -20°C to 60°C |
| Material | Plastic |
| Certification | CE, ROHS |
| Dimensions (L x W x H) | 130mm x 40mm x 23mm (approximate) |
| Weight | 0.065 kg (approximate) |
5. Installation and Wiring
Before beginning installation, ensure the power supply is disconnected to prevent electric shock. Follow the wiring diagrams carefully based on your LED strip type.
5.1 General Installation Steps
- Mount the WM-LM052 controller in a well-ventilated, dry location, away from direct sunlight, rain, and strong electromagnetic interference.
- Connect your LED strip(s) to the output terminals of the controller according to the specific wiring diagram for your LED type.
- Connect the DC12V-24V power supply to the input terminals of the controller. Ensure correct polarity (V+ to V+, V- to V-).
- Once all connections are secure, you may connect the power supply to the main power source.
5.2 Wiring Diagrams
The WM-LM052 is a 5-in-1 controller, supporting various LED strip configurations. Refer to the diagram below for detailed wiring instructions for each type. The output terminals are labeled V+, WW, CW, B, G, R, V+.
- Single Color LED Strip: Connect the positive (+) wire of the LED strip to V+ and the negative (-) wire to one of the 'W' (White) terminals (e.g., WW or CW).
- CCT (Dual White) LED Strip: Connect the common positive (+) wire of the LED strip to V+. Connect the Warm White (WW) wire to the 'WW' terminal and the Cold White (CW) wire to the 'CW' terminal.
- RGB LED Strip: Connect the common positive (+) wire of the LED strip to V+. Connect the Red (R) wire to the 'R' terminal, Green (G) wire to the 'G' terminal, and Blue (B) wire to the 'B' terminal.
- RGBW LED Strip: Connect the common positive (+) wire of the LED strip to V+. Connect R, G, B wires to their respective terminals, and the White (W) wire to one of the 'W' terminals (e.g., WW or CW).
- RGB+CCT LED Strip: Connect the common positive (+) wire of the LED strip to V+. Connect R, G, B wires to their respective terminals, the Warm White (WW) wire to the 'WW' terminal, and the Cold White (CW) wire to the 'CW' terminal.

6. Operating Instructions
6.1 Pairing with Zigbee Gateway/Hub
- Ensure the controller is powered on. The pilot lamp will indicate its status.
- Put your Zigbee gateway/hub into pairing mode (refer to your gateway's manual for specific instructions).
- Press and hold the 'SET' button on the WM-LM052 controller for approximately 5-10 seconds until the pilot lamp flashes rapidly, indicating it is in pairing mode.
- Once successfully paired, the pilot lamp will stop flashing and remain solid or turn off, depending on the status. The controller should now appear in your Zigbee gateway's app.
6.2 Smartphone App Control (Tuya/Graffiti Smart App)
The WM-LM052 controller is compatible with the Tuya Smart or Graffiti Smart applications, allowing for comprehensive control from your smartphone.
- Scan the QR code on the controller (or refer to the product packaging) to download and install the appropriate smartphone app (e.g., Tuya Smart).
- Register or log in to your account.
- Add the WM-LM052 controller through your Zigbee gateway within the app.
- Once added, you can control various aspects of your LED lighting, including:
- Turning lights On/Off.
- Adjusting brightness.
- Changing color temperature (for CCT, RGBW, RGB+CCT strips).
- Selecting colors (for RGB, RGBW, RGB+CCT strips).
- Setting scenes and schedules.
6.3 Voice Control (Amazon Alexa and Google Assistant)
After successfully pairing the controller with your Zigbee gateway and adding it to the smartphone app, you can enable voice control through Amazon Alexa or Google Assistant.
- Ensure your Amazon Alexa or Google Assistant device is set up and linked to your smartphone app account (e.g., Tuya Smart skill/service enabled).
- Discover new devices through your Alexa or Google Home app.
- Once discovered, you can use voice commands such as:
- "Alexa, turn on the living room lights."
- "Hey Google, set the kitchen lights to blue."
- "Alexa, dim the bedroom lights to 50%."
6.4 Remote Control (Optional)
If you have a compatible 2.4G RF remote control, you can pair it with the WM-LM052 for direct control without the app or voice assistant. Refer to the remote control's manual for pairing instructions, which typically involves putting the controller into pairing mode and then activating a pairing function on the remote.
7. Maintenance
- Keep the controller clean and free from dust. Use a dry, soft cloth for cleaning.
- Avoid exposing the controller to moisture or extreme temperatures.
- Ensure proper ventilation around the device to prevent overheating.
- Regularly check wiring connections for security and signs of wear.
8. Troubleshooting
8.1 Common Issues
- Lights not turning on:
- Check if the power supply is connected and functioning correctly.
- Verify all wiring connections between the power supply, controller, and LED strip for correct polarity and secure contact.
- Ensure the LED strip itself is functional.
- Controller not responding to app/remote:
- Ensure the controller is properly paired with your Zigbee gateway/hub.
- Check your home Wi-Fi network and Zigbee network for stability.
- Restart the controller by disconnecting and reconnecting power.
- If using a remote, ensure it is paired with the controller and has working batteries.
- Incorrect colors or flickering:
- Verify that the LED strip type selected in the app matches your physical LED strip (e.g., RGB, RGBW, RGB+CCT).
- Check wiring for loose connections or incorrect color channel assignments.
8.2 User Tips
- Pairing Difficulty: If you experience difficulty connecting the controller to your device or gateway, ensure the controller is in pairing mode (rapidly flashing pilot lamp) and your Zigbee hub is actively searching for new devices. Try moving the controller closer to the hub during the pairing process.
- Network Stability: For reliable smart control, ensure your Wi-Fi and Zigbee networks are stable and have good coverage in the area where the controller is installed.
9. Warranty and Support
WELLMEET LED controller products come with a warranty and technical support to ensure your satisfaction.
9.1 Warranty Information
- Standard Warranty: The product is covered by a 3-year warranty from the date of purchase.
- Free Warranty Service: For quality issues occurring within two years from the date of purchase, WELLMEET will provide free repair or service replacement.
- Paid Warranty Service: Products exceeding the free warranty period will incur a charge for repair services.
9.2 Warranty Exclusions
The following situations are not covered under free warranty or replacement services:
- Damage caused by excessive voltage, overload, or improper operation.
- Any wiring errors, water immersion (for non-waterproof products), or unauthorized repairs.
- Serious damage or deformation to the product's appearance caused by transportation or physical impact.
- Damage resulting from natural disasters or uncontrollable human factors, such as earthquakes, floods, or fires.
9.3 Support and Returns
- For factory products, our company's maximum responsibility is to replace them with products of the same model and quantity.
- To expedite repair or replacement, please provide a detailed description of the fault phenomenon, operating environment, and any actions taken to diagnose the issue.
- If a return is necessary, the customer is responsible for the logistics cost of returning the product and initial accessories.
