WELLMEET C01W, C02W, C03W, C04W, C05W Series

Contents

WELLMEET RF Tuya WiFi LED Light Dimmer and Controller Instruction Manual

Models: C01W, C02W, C03W, C04W, C05W Series

1. Product Overview

The WELLMEET RF Tuya WiFi LED Light Dimmer and Controller series offers versatile control over various LED lighting types, including single color, CCT (Correlated Color Temperature), RGB, RGBW, and RGBCCT. These controllers support both WiFi (Tuya Smart/Smart Life App) and 2.4GHz RF remote control, as well as third-party voice control integration with platforms like Google Assistant and Amazon Alexa.

Different models are designed for specific LED strip types:

  • C01W: Single Color LED Strip Controller
  • C02W: CCT (Dual White) LED Strip Controller
  • C03W: RGB LED Strip Controller
  • C04W: RGBW LED Strip Controller
  • C05W: RGBCCT LED Strip Controller
Image showing 3 ways to control LED lights: App, Voice, 2.4GHz Remote.
Control your LED lights via App, Voice, or 2.4GHz Remote.

2. Specifications

FeatureSpecification
Brand NameWELLMEET
Model NumbersWM-C01W, WM-C02W (and other variants C03W, C04W, C05W)
Item TypeDimmers
Input VoltageDC12V-24V
Output Current7.5A/Channel (C01W, C02W), 6A/Channel (C03W, C04W, C05W)
Max. Load Power15A Total Output
MaterialPLASTIC
Working Temperature (Ta)-20~40°C
CertificationCE, ROHS
OriginMainland China
Package DimensionsLength: 8cm, Width: 4cm, Height: 2cm
Package Weight0.087 kg

3. Installation Precautions

Text outlining installation precautions for the LED controller.
Important safety and installation guidelines.
  1. This product should be debugged and installed by someone with professional qualifications.
  2. This product is not waterproof and needs to be protected from sunlight and rain. If installed outdoors, please use a waterproof box.
  3. Good heat dissipation conditions will extend the service life of LED controllers. Please install the product in a well-ventilated environment.
  4. Do not install or use this type of product in areas with lightning, strong magnetic fields, or high voltage.
  5. Please check if the output voltage of the LED power supply used meets the requirements of the product voltage range.
  6. The diameter and size of the wires used must be sufficient to load the LED lighting fixtures connected, and ensure that the wiring is secure to prevent wires from passing through, accidents triggered by heat, or poor contact.
  7. Before powering on and debugging, it is necessary to ensure that all wiring is correct to avoid damage to the lighting fixtures due to wiring errors.

4. Setup and Wiring

Ensure all power is disconnected before beginning installation. Connect the LED controller to your LED strip and power supply according to the wiring diagrams below. The input is typically marked 'INPUT' with V+ and V- terminals, and the output 'OUTPUT' with V+ and specific channel terminals (e.g., V-, WW, CW for CCT, R, G, B, W for RGBW).

WM-C01W Single Color LED Controller with input and output terminals labeled.
WM-C01W Single Color LED Controller wiring diagram.
WM-C02W CCT Dual White LED Controller with input and output terminals labeled.
WM-C02W CCT Dual White LED Controller wiring diagram.
WM-C03W RGB LED Controller with input and output terminals labeled.
WM-C03W RGB LED Controller wiring diagram.
WM-C04W RGBW LED Controller with input and output terminals labeled.
WM-C04W RGBW LED Controller wiring diagram.
WM-C05W RGBCCT LED Controller with input and output terminals labeled.
WM-C05W RGBCCT LED Controller wiring diagram.

4.1 App Pairing (Tuya Smart / Smart Life)

  1. Download the Tuya Smart or Smart Life app from your smartphone's app store.
  2. Power on the LED controller.
  3. Long press the 'SET' button on the controller until the connected LED strip blinks. This indicates it's in smart pairing mode.
  4. Open the Tuya Smart/Smart Life app and tap 'Add Device'. The app should discover the device.
  5. Tap 'Add' and enter your WiFi network password.
  6. Once successfully added, you can control the light via the app.
Tuya Smart App Remotely Control diagram showing a floor plan with lighting zones.
Remote control via Tuya Smart App, managing different lighting zones.

4.2 Remote Control Pairing (2.4GHz RF)

The controller supports 2.4GHz RF wireless remote control. Compatible remote models include RC01, RC02, and WR02RF (purchased separately).

RC01 White Remote Control for single color LED strips.
RC01 Remote Control for Single Color LED Controllers.
  1. Ensure the LED controller is powered off.
  2. Power on the LED controller.
  3. Within 3 seconds of powering on the light, press any of the zone buttons (e.g., '1', '2', '3', or '4') on the remote control three times.
  4. The connected LED strip will blink three times, indicating successful pairing.
Diagram illustrating the auto-transmitting function of the LED controllers.
Auto-Transmitting Function: One controller can transmit signals to another within 30m, extending remote control distance.
Video demonstrating the pairing process for both the Smart Life App and the 2.4GHz RF remote control with the LED controllers.

5. Operating Instructions

5.1 App Control

Once paired with the Tuya Smart or Smart Life app, you can:

  • Turn lights On/Off.
  • Adjust brightness (0-100%).
  • Change color temperature (for CCT, RGB, RGBW, RGBCCT models).
  • Select dynamic modes or create custom scenes.
  • Set timers and schedules for automatic operation.
App screenshot showing timing setting for LED lights.
Set timing schedules for your LED lights using the app.
App screenshot showing brightness adjustment from 0% to 100%.
Adjust brightness levels smoothly via the app.

5.2 Remote Control

Use the 2.4GHz RF remote control (e.g., RC01, RC02) to directly control the paired LED lights:

  • ON/OFF: Power the lights on or off.
  • Brightness Adjustment: Increase or decrease light intensity.
  • Color/Color Temperature Adjustment: Change the color or color temperature (depending on the controller model).
  • Scene Selection: Access pre-programmed lighting scenes.

5.3 Voice Control

Integrate your controller with smart home assistants for hands-free control:

  1. Ensure your controller is successfully paired with the Tuya Smart/Smart Life app.
  2. Link your Tuya Smart/Smart Life account to your Google Assistant or Amazon Alexa account through their respective apps.
  3. Use voice commands such as:
    • "Hey Google, turn on the living room lights."
    • "Alexa, set the kitchen lights to warm white."
    • "Hey Google, dim the bedroom lights to 50%."
Image showing voice control integration with Amazon Alexa and Google Assistant.
Control your lights conveniently with voice commands.

6. Maintenance

  • Keep the controller dry and away from direct sunlight or rain.
  • Ensure adequate ventilation around the controller to prevent overheating.
  • Regularly check wiring connections for security and good contact.
  • Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

7. Troubleshooting

7.1 Device Not Pairing with App

  • Ensure the controller is powered on and the LED strip is blinking (indicating pairing mode). If not, long press the 'SET' button.
  • Verify your smartphone is connected to a 2.4GHz WiFi network. These controllers typically do not support 5GHz WiFi.
  • Check that your WiFi password is entered correctly in the app.
  • Ensure the controller is within range of your WiFi router.
  • Restart the controller and try the pairing process again.

7.2 Remote Control Not Working

  • Ensure the remote control is compatible with your specific controller model (e.g., RC01 for C01W, RC02 for C02W).
  • Check if the remote control has fresh batteries.
  • Re-pair the remote control with the controller by following the steps in Section 4.2.
  • Ensure there are no obstructions between the remote and the controller.

7.3 Lights Not Responding

  • Check all wiring connections (input, output, power supply) to ensure they are secure and correct.
  • Verify that the power supply is providing the correct voltage (DC12V-24V) and sufficient current for your LED strip.
  • Ensure the controller is not overloaded (Max. 15A total output).
  • If using voice control, confirm the app integration is active and your voice commands are clear.

8. User Tips

  • Group Control: For multiple controllers in different areas, utilize the app's group control feature to manage several lights simultaneously.
  • Scene Automation: Explore the app's automation features to create custom scenes based on time of day, weather, or other smart home triggers.
  • Extend Remote Range: The auto-transmitting function allows multiple controllers within 30m of each other to extend the effective range of a single remote control.
  • Safety First: Always double-check wiring and ensure proper insulation to prevent electrical hazards.

9. Warranty and Support

Text detailing after-sales service and warranty information.
After-Sales Service and Warranty Information.

Our LED controller products provide lifelong technical support and warranty services:

  • Free Warranty: If any quality issues occur within two years from the date of purchase, our company will provide free repair or service replacement.
  • Paid Warranty: Products that exceed the free warranty period will be charged a certain cost of repair materials.

The following situations are not within the scope of free warranty or replacement services:

  • Damage caused by excessive voltage, overload, improper operation, etc.
  • Any wiring errors, water immersion (non-waterproof products), and unauthorized repairs.
  • Any serious damage or deformation to the appearance caused by transportation or knocking.
  • The product appearance is severely damaged or deformed.
  • Damage caused by natural disasters and uncontrollable human factors, such as earthquakes, floods, fires, etc.

Our company's maximum responsibility for factory products is to replace them with products of the same model and quantity.

In order to speed up the repair or replacement process, please indicate the fault phenomenon, operating environment, and actions taken when the fault occurred to ensure that the repair situation is quickly resolved.

As long as we receive the returned product and initial accessories, we promise to replace or repair them for the customer, and the logistics cost of the return will be borne by the customer.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.