1. Introduction
This manual provides detailed instructions for the installation, setup, operation, and maintenance of your INQMEGA 5MP/4MP WIFI Wireless PTZ Solar Camera. Please read this manual carefully before use to ensure proper functionality and safety.
The INQMEGA solar camera is a versatile security solution featuring high-definition video, solar power, PTZ control, two-way audio, and robust weather resistance. It is designed for outdoor surveillance without the need for complex wiring or external power sources.

Image: INQMEGA 5MP 4MP WIFI Wireless PTZ Solar Camera with solar panel, highlighting 4G connectivity, 5MP UltraHD, PIR Motion Detection, IP66 Waterproof, HD Night Vision, and built-in battery.
2. Safety and Compliance
⚠️️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
⚠️️ Warning:
- Do not throw the product into fire or short-circuit it, to prevent leakage, overheating, or explosion.
- Fully charge the battery before using the camera for the first time.
- Forbid using long screws (>0.5cm) for integrated installation (refer to installation section).
- Remove all protective films before use.
This device complies with CE certification standards.
3. Package Contents
Verify that all items listed below are included in your package:

Image: Detailed list of products, showing the camera, solar panel, user manual, power cable, tweezers, and mounting screws.
- Camera x 1
- Solar panel x 1
- User Manual x 1 (PDF available at https://manuals.plus/m/feb236dc6aedd52c63f5bd2c9b5dcf919b59da894014abd66449d663ff3a3984)
- Power cable x 1
- Tweezers x 1
- Screw set (including long screws, short screws, wall plugs, hex key)
4. Product Overview
4.1. Product Diagram
The camera assembly includes the following components (refer to the full user manual PDF for a visual diagram):
- Antenna: For wireless communication.
- Solar Panel: Charges the built-in battery.
- Microphone: For two-way audio.
- Photoresistance Lens: Detects ambient light for night vision activation.
- PIR Sensor: Passive Infrared sensor for motion detection.
- IR LED/White LED: Provides illumination for night vision. Default is IR LED (black and white video). White LED mode provides colorful video at night when the camera wakes up.
- LED Indicator: Shows camera status.
4.2. Wi-Fi Camera Card Slot and Reset Button
The camera features a TF Card slot for local storage and a Reset Button. The Reset Button is typically located near the card slot. To reset the camera, press and hold the button for 5 seconds. This action is necessary when re-connecting the camera or setting up the network for the first time (refer to the full user manual PDF for a visual diagram).
- TF Card Slot: Insert a Micro SD card for local video storage.
- Reset Button: Press and hold for 5 seconds to reset the camera.
4.3. Battery Interface
The battery interface includes a Power Switch, Recharge Port, and a DC5V Port for connecting the solar panel or an extend cable for charging (refer to the full user manual PDF for a visual diagram).
- Power Switch: ON/OFF switch for the camera.
- Recharge Port: Connects to the solar panel or an extend cable for charging.
- DC5V Port: For solar panel or extend cable connection.
Tip: Approximately 7 hours are required for a full charge of the batteries.
5. Installation Method
The camera can be installed using a wall bracket or integrated installation (refer to the full user manual PDF for visual instructions).
5.1. Wall Bracket Installation
Use the provided screws and wall plugs to mount the bracket securely to a wall. Ensure the bracket is stable before attaching the camera.
5.2. Integrated Installation
For integrated installation, ensure that the screws used are 0.5cm or shorter. Using screws longer than 0.5cm (e.g., >0.5cm) is prohibited as it may damage the internal components of the camera.
WARNING: Forbid using long screws (>0.5cm) for integrated installation.
6. App Registration
The camera operates with the "UBox" app. Follow these steps to register and set up the app:
6.1. Download and Install the App
Scan the QR code in the full user manual PDF or search for "UBox" in the App Store (for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.
6.2. Register an Account
- Open the UBox app.
- Input your E-mail address and click "Register".
- Check and select to agree to the agreement.
- Your E-mail inbox will receive a verification code. Enter this code in the app to complete registration.
For a better user experience, please allow all permissions requested by the app to avoid missing any notifications.
7. Network Connection
The camera supports both Wi-Fi and 4G connectivity, depending on the model. Please note the differences:

Image: Comparison guide for Wi-Fi and 4G versions. Wi-Fi version requires a 2.4GHz Wi-Fi network and does not support SIM cards. 4G version works with 3G/4G networks via SIM card and does not support Wi-Fi.
7.1. Wi-Fi Version
Your camera should be connected to a 2.4GHz Wi-Fi network to start working. It does not support 3G/4G connection or SIM cards.
7.2. 4G Version
Your camera can work within the range of 3G/4G by inserting a SIM card. It is easy to access the network environment. It does not support Wi-Fi network.
7.3. Wi-Fi Network Setup (for Wi-Fi Version)
If the device does not support Bluetooth network configuration or if Bluetooth configuration fails, follow these steps:
- Add Family: Click "Add Family" in the app, then set the room or position as per reminders.
- Enter Family Name: Enter your family name and click "Next".
- Enter Location Info: Enter necessary information such as Country, Province, and optionally City/Address/Zip code, then click "Finish".
- Add Device: Click "Add a Device", then "Setup WiFi Device" to proceed.
- Power On Camera: Power on your camera and check that the blue indicator LED is blinking, or you hear the voice prompt "The camera is now ready to begin pairing". If the blue LED is not lit, refer to troubleshooting.
- Select Device Location: Select the name and device location, then click "Next".
- Connect to Wi-Fi: Enter the 2.4GHz Wi-Fi account password to connect. Click "Configuring devices".
Note:
- The device does not support 5GHz Wi-Fi. Ensure your phone is connected to a 2.4GHz Wi-Fi network.
- Raise your phone's volume and keep it a few inches away from the device during connection.
- The total number of letters for both the username and password of your 2.4GHz Wi-Fi router should be less than 32.
- Scan QR Code: Align the QR code displayed on your phone with the camera lens to scan it. Maintain a distance of about 10cm between the phone and the camera. You will hear a confirmation after the camera scans successfully.
- Connection Success: Once the connection is successful, click "OK" to complete.
8. Operation
8.1. PTZ Rotation Control

Image: Mobile app interface demonstrating PTZ (Pan-Tilt-Zoom) control, allowing the camera to rotate 355° horizontally (Pan) and 90° vertically (Tilt).
The camera supports Pan-Tilt-Zoom (PTZ) functionality. You can rotate the camera 355° horizontally (pan) and 90° vertically (tilt) directly through the UBox app.
8.2. Two-way Audio

Image: Illustration of the camera's two-way audio feature, showing a person speaking through the app and another person near the camera hearing and responding.
With a built-in microphone and speaker, the camera allows for easy two-way communication. You can talk through your wireless camera using the app.
8.3. HD IR Night Vision

Image: Example of HD IR Night Vision, showing a clear black and white image of a fox in the dark, with IR LEDs indicated.
The camera features built-in 4 IR LEDs, providing clear and colorful or HD image effects day and night. The default setting uses IR LEDs for black and white night vision. If you change to White LED mode, the white LEDs will activate at night when the camera wakes up, providing colorful video.
8.4. PIR Motion Detection

Image: Illustration of PIR Motion Detection, showing the camera detecting deer and sending an alarm notification to a smartphone.
When a moving object is detected by the PIR sensor, the camera will wake up, automatically record, and send an app notification reminder.
You can adjust the PIR detection sensitivity in the device settings:
- Disabled: PIR detection is off.
- Low: Detects motion with a 7-second delay.
- Medium: Detects motion with a 5-second delay.
- High: Detects motion with a 1-second delay.
Recommendation: In noisy environments with frequent movement, set sensitivity to "Disabled" or "Low" to reduce false alerts and conserve battery power.
8.5. Storage (SD Card & Cloud)

Image: Icons for SD Card and Cloud Storage, indicating multiple options for recording and saving video footage.
The camera supports both SD card and cloud service for encrypted video storage. This ensures safe backup of your precious moments and prevents important information from being missed.
9. Specifications

Image: Product parameter diagram showing key dimensions of the camera and solar panel assembly.
| Feature | Detail |
|---|---|
| Brand Name | SecTec (also marketed as INQMEGA) |
| Model Number | 517C-5M/4M |
| Connectivity | WiFi, 4G (model dependent) |
| Sensor | CMOS |
| Lens (mm) | 3.6mm |
| Focal Length | 3.6mm |
| Viewing Angle | 90° |
| PTZ Control | Pan 355°, Tilt 90° |
| Technology | Infrared (INFRARed) |
| Night Vision | HD IR Night Vision (4 IR LEDs, optional White LED for color night vision) |
| Audio Output | None (Two-way audio via built-in mic/speaker) |
| Alarm Action | FTP Photo, App notifications |
| Supported Mobile Systems | iOS, Android |
| Supported Operating Systems | No (App-based control) |
| Signal System | PAL |
| Waterproof Rating | IP66 |
| Power Source | Solar Energy, Built-in Battery |
| Certification | CE |
| Origin | Mainland China |
| Smart Home Platform | Other |
| Package Dimensions (approx.) | Length: 10cm, Width: 15cm, Height: 10cm |
| Package Weight (approx.) | 1.3 kg |
10. Troubleshooting & Configuration Notes
10.1. Camera Not Rotating or Waking Up (Battery Full)
Problem: The camera cannot rotate in any direction or wake up by PIR, and only allows remote viewing via mobile phone, even if the battery appears full.
Reason: The battery power may have dropped below the working voltage at some point, causing the protection circuit to turn off the power.
Action: To re-enable the battery protection circuit, recharge the camera using a Type-C cable with a DC 5V power supply for approximately 2-5 seconds. The camera should then rotate again. Note that only the Type-C port can enable the protection circuit.
The full user manual PDF contains a diagram illustrating the correct DC 5V charging method and a warning against using higher voltage (DC 5V~9V/12V/20V) Type-C ports for charging, as this can damage the camera.
Forbiddance: Do NOT always charge batteries with Type-C port when camera working, especially with higher voltage chargers (DC 5V~9V/12V/20V).
10.2. General Configuration Tips
- Initial Charge: Fully charge the battery for about 7 hours with a DC 5V 2A power supply before first use.
- Battery Life: Battery life is affected by wake-up frequency and duration. In high-traffic areas, consider setting PIR sensitivity to "Disabled" or "Low" to extend battery life. Charge immediately when the battery is low.
- Power Saving: The camera has a low-power consumption design. It wakes for a few seconds upon activation, then enters standby mode. You can adjust the work time in the app settings.
- Wi-Fi Signal: Keep the camera within range of your Wi-Fi router. If there are thick or insulated objects between the camera and router, ensure the Wi-Fi signal is strong before setup.
11. User Tips
- For optimal battery performance, especially in areas with frequent motion, adjust the PIR sensitivity settings in the app to "Low" or "Disabled" to minimize unnecessary wake-ups and recordings.
- Always ensure the camera's battery is fully charged before initial deployment to maximize its operational lifespan between charges.
- When setting up the Wi-Fi connection, ensure your mobile device is connected to a 2.4GHz network, as the camera does not support 5GHz Wi-Fi. Keep your phone close to the camera during the QR code scanning process.
- If you experience issues with camera rotation or wake-up despite a seemingly full battery, a quick recharge with a DC 5V Type-C cable for a few seconds can reset the battery protection circuit.
12. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's official store or contact customer service through the platform where the product was purchased.
Please retain your purchase receipt as proof of purchase for any warranty claims.