1. Introduction
The Eachine TX06 is a compact and lightweight All-In-One (AIO) FPV camera and 5.8Ghz video transmitter designed for RC drones, particularly micro and mini FPV setups. It features a 700TVL camera with a 120-degree field of view, 48 channels, 25mW output power, and supports Smart Audio for convenient OSD configuration. This manual provides essential information for the safe and effective use of your TX06.
2. Safety Information
- Always operate the FPV system in compliance with local laws and regulations regarding radio frequency transmission.
- Ensure proper ventilation during operation to prevent overheating.
- Do not expose the device to moisture or extreme temperatures.
- Verify correct power input voltage (3.3-5.5V) before connecting to avoid damage.
- Keep out of reach of children.
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Package Contents
Please check the package for the following items:
- 1 x Eachine TX06 700TVL FOV 5.8Ghz 48CH Mini FPV Camera AIO Transmitter
- 1 x Molex 2P 1.25mm to JST-DS 2.0mm Power Adapter Cable
- 1 x User Manual
4. Specifications
| Feature | Specification |
|---|---|
| Frequency | 5.8Ghz |
| Channels | 48CH |
| Output Power | 25mW |
| Resolution | 700TVL M7 Lens |
| Lens Angle | 120° FOV |
| Video Angle | Horizontal: 110° / Vertical: 90° |
| Input Voltage | 3.3-5.5V |
| Input Current | 40mA @ 3.7V |
| Working Current | 280mA |
| Video Format | NTSC / PAL (selectable) |
| Extra Features | Smart Audio, Pitmode, OSD Configuration via FC Uart |
| Dimensions (L*W) | 14mm * 13.8mm |
| Net Weight | 2.8g |
| Connectors | Molex 1.25mm 2P & JST-SH 1.0mm 4P |
5. Setup
5.1 Wiring Diagram
The TX06 comes with two sets of wires for power and signal. Ensure correct polarity and connections to your flight controller or power source.
- Power Connector (Molex 1.25mm 2P):
- Red wire: Positive (+) 3.3-5.5V
- Black wire: Negative (-) GND
- Signal/Control Connector (JST-SH 1.0mm 4P):
- Yellow wire: Video Out
- White wire: Smart Audio / Control
- Green wire: Ground (GND)
5.2 Mounting
Due to its small size and light weight (2.8g), the TX06 can be easily mounted on various micro FPV frames. Use appropriate mounting hardware (not included) to secure the camera, ensuring the lens is clear and the antenna is positioned for optimal signal transmission.
6. Operating Instructions
6.1 Powering On
Connect the TX06 to a stable power source within the 3.3-5.5V range. Once powered, the camera and video transmitter will activate.
6.2 Frequency and Channel Switching
The TX06 features a single button for frequency and channel adjustments, indicated by blue and red LEDs.
- Channel Switching: Short press the button to change channels (1-8 adjustable). The red LEDs indicate the current channel.
- Band Switching: Press and hold the button for approximately 2 seconds to change frequency bands (1-6 adjustable). The blue LEDs indicate the current band.
LED Indicators:
- Blue LEDs (1-6): Indicate the selected frequency band.
- Red LEDs (1-8): Indicate the selected channel within the band.
- Example: If Blue LED1 and Red LED1 are lit, it indicates Band 1, Channel 1 (5865MHz).
Note: Some versions of Eachine FPV cameras (e.g., TX02Pro) have memory for settings. If your TX06 does not retain settings after power cycling, you will need to repeat the steps above to set your desired frequency and channel each time.
6.3 5.8Ghz Channel Frequencies
The TX06 supports 48 channels across 6 bands. Refer to the table below for specific frequencies:
6.4 Smart Audio and OSD Configuration
The TX06 supports Smart Audio, allowing for convenient configuration of video transmitter settings (like channel, band, and power) directly from your flight controller's On-Screen Display (OSD) using FC Uart. Consult your flight controller's manual for specific Smart Audio setup instructions.
7. Maintenance
- Cleaning: Gently clean the camera lens with a soft, dry cloth. Avoid using harsh chemicals.
- Storage: Store the TX06 in a dry, cool place away from direct sunlight and extreme temperatures.
- Cable Inspection: Regularly check all cables and connectors for signs of wear or damage. Replace if necessary.
- Antenna Care: Ensure the brass dipole antenna is not bent or damaged, as this can affect signal quality.
8. Troubleshooting
- No Video Signal:
- Check all wiring connections, especially power and video out.
- Ensure your FPV receiver is on the correct frequency and channel.
- Verify the input voltage to the TX06 is within the specified range (3.3-5.5V).
- Poor Video Quality/Range:
- Check for obstructions between the TX06 and your FPV receiver.
- Ensure the antenna is securely attached and undamaged.
- Avoid operating near strong electromagnetic interference sources.
- Confirm the TX06 is not overheating.
- Cannot Change Channels/Bands:
- Ensure the button is functioning correctly.
- If using Smart Audio, ensure it's correctly configured and not conflicting with manual button presses.
9. User Tips
- Pre-flight Check: Always perform a quick visual inspection of all connections and the antenna before each flight.
- Power Source: Use a clean and stable power source to avoid video noise. A dedicated 5V BEC is often recommended for FPV gear.
- Smart Audio Integration: For advanced users, integrating Smart Audio with your flight controller provides a seamless way to manage VTX settings without needing physical access to the button.
10. Warranty and Support
For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.