1. Product Overview
The BEVOTOP MCX Male to C5 Cable is a high-quality RF coaxial cable designed for reliable signal transmission in various applications. It features an MCX Male connector on one end and an FFA 00S C5 Male Plug on the other, utilizing RG316 RF coaxial cable with a 50 Ohm impedance. This cable is particularly suitable for use with ultrasonic flaw detectors, acceleration sensors, and other specialized equipment.
2. Specifications
2.1 General Specifications
| Feature | Description |
|---|---|
| Product Name | MCX to C5 Cable |
| Connector A | FFA 00S C5 Male Plug |
| Connector B | MCX Male (Straight or Right Angle) |
| Cable Type | RG316 RF Coaxial Cable |
| Impedance | 50 Ohm |
| Connector Plating | Nickel Plated |
| Cable Length Options | 10cm to 10M (customizable) |
| Application | Ultrasonic flaw detector, acceleration sensor, GSM system, GPS navigation system, Wireless communication system, Antennas, Car radio, Test equipment, Microwave components, Data transmission, LAN system, Satellite transmission, Aviation equipment, etc. |
| Customization | Available for cable type, length, and connector types. |
| Origin | Mainland China |
| Certification | NONE |
2.2 RG316 Cable Construction
| Component | Material | Diameter (mm) |
|---|---|---|
| Inner Conductor | Silver Covered Copper | 7/0.175 |
| Insulation | PTFE | Φ1.52 |
| Outer Conductor | Silver Covered Copper | Φ1.95 |
| Jacket | FEP | Φ2.54 |
2.3 Connector Performance Parameters
| Category | Parameter | Value |
|---|---|---|
| Mechanical Performance | Shell Material | Copper alloy nickel plating |
| Contact Material | Beryllium copper gold plating | |
| Insulation Material | PTFE | |
| Service Life | 5000+ cycles | |
| Electrical Performance | Contact Resistance | ≤12.5 mΩ |
| Insulation Resistance | 5000 MΩ (normal) | |
| Withstand Voltage | 750V (sea level) | |
| Rated Working Current | 3.8A | |
| Other Performance | Working Temperature | -55°C ~ +150°C |
| Relative Humidity | 90%~95% (40±2°C) | |
| Salt Spray Test | 72h | |
| Waterproof Rating | Head insertion IP50 |
3. Installation and Connection
This cable is designed for straightforward connection between compatible devices. Ensure that the connectors on your equipment match the MCX Male and FFA 00S C5 Male Plug types.
3.1 Identifying Connectors
- MCX Male Connector: This is the smaller, push-on/pull-off connector. It can be straight or right-angle.
- FFA 00S C5 Male Plug: This is a precision connector, often used in test and measurement equipment.
3.2 Connection Procedure
- Identify the appropriate ports on your ultrasonic flaw detector or other compatible device.
- Align the FFA 00S C5 Male Plug with the corresponding female receptacle on your equipment. Push firmly until it clicks into place, ensuring a secure connection.
- Align the MCX Male connector with its mating female receptacle. For straight connectors, push directly. For right-angle connectors, ensure proper orientation before pushing. The MCX connector is typically a push-on type.
- Verify that both ends of the cable are securely connected to prevent signal loss or intermittent operation.
4. Operation
Once the cable is securely connected, it facilitates the transmission of RF signals between your devices. No specific operational steps are required for the cable itself beyond ensuring a proper connection. The cable is passive and designed for reliable signal integrity.
4.1 Best Practices for Signal Integrity
- Avoid sharp bends or kinks in the cable, as this can damage the internal conductors and affect performance.
- Do not overtighten connectors, especially the FFA 00S type, to prevent damage to the mating surfaces.
- Keep connectors clean and free from dust or debris. Use appropriate cleaning methods for RF connectors if necessary.
- Ensure the cable length is appropriate for your application to minimize signal attenuation.
5. Maintenance and Care
Proper maintenance will extend the lifespan and ensure optimal performance of your BEVOTOP RF coaxial cable.
- Cleaning: Periodically inspect the connectors for dirt or corrosion. Use a lint-free cloth and a small amount of isopropyl alcohol to gently clean the contact surfaces if needed. Ensure connectors are dry before re-connecting.
- Storage: Store the cable in a clean, dry environment, away from extreme temperatures and direct sunlight. Avoid coiling the cable too tightly.
- Inspection: Regularly check the cable jacket and connectors for any signs of wear, cuts, or damage. Replace the cable if significant damage is observed.
6. Troubleshooting
If you experience issues with signal transmission, consider the following troubleshooting steps:
- No Signal or Intermittent Signal:
- Ensure both ends of the cable are securely and correctly connected to their respective ports.
- Check for any visible damage to the cable or connectors (e.g., bent pins, frayed jacket).
- Test with a different, known-good cable if available, to rule out the cable as the source of the problem.
- Verify that the impedance of the cable (50 Ohm) matches the requirements of your equipment.
- Incorrect Cable Type or Length:
If the cable type (e.g., RG316) or length is not suitable for your specific application, it can lead to signal degradation. BEVOTOP offers customization services for various cable types (RG174, RG58, etc.) and lengths (from 10cm to 10M or more) as well as different connector types (SMA, Fakra, TS9, CRC9, etc.).
Figure 7: BEVOTOP offers custom-made services for connectors and cables.
7. User Tips
- Customization: If your application requires a specific cable type (e.g., RG174, RG58, RG142, LMR195, LMR400) or a non-standard length, BEVOTOP can provide custom-made solutions. This also applies to different connector types beyond MCX and FFA 00S.
- Length Matters: Always choose the shortest practical cable length for your setup to minimize signal loss and ensure optimal performance, especially in high-frequency applications.
- Compatibility Check: Before purchasing or connecting, double-check the compatibility of the connectors and cable impedance with your existing equipment to avoid issues.
8. Support Information
BEVOTOP specializes in providing a comprehensive range of RF coaxial connectors and cable assemblies. Our products are utilized across various industries including data storage, networking, communications, automotive, medical, and aerospace.
For technical assistance, custom orders, or any inquiries regarding your BEVOTOP product, please refer to the contact information provided by your retailer or visit the official BEVOTOP website.
