1. Introduction
Thank you for choosing the Heng Long 7.0/7.1 Version 2.4G Transmitter and Receiver Board. This system is designed to provide precise control and enhanced functionality for your 1/16 scale R/C smoking tank. This manual will guide you through the installation, operation, and maintenance to ensure optimal performance and longevity of your product.
2. Safety Information
- Always operate your R/C tank in a safe environment, away from people, pets, and obstacles.
- Ensure all connections are secure before powering on the system.
- Do not expose the transmitter or receiver board to moisture or extreme temperatures.
- Keep batteries away from children and dispose of them properly.
- Always turn off the receiver/tank power before turning off the transmitter to prevent runaway.
3. Package Contents
The package typically includes the following components:
- Heng Long 2.4G Transmitter (Version 7.0 or 7.1)
- Heng Long Tank Function Main Board (TK-7.0 or TK-7.1)
- Connecting wires (as pictured)
4. Product Overview
4.1 Main Board (TK-7.0 / TK-7.1)
The main board is the central control unit for your R/C tank, managing motor functions, sound effects, and other features. The TK-7.1 version is rated for 180A, while the TK-7.0 is typically rated for 120A.

4.2 2.4G Transmitter
The 2.4GHz transmitter provides proportional control over your tank's movements and functions. It features dual joysticks for precise control and various buttons for special actions.

Transmitter Controls:
- Left Joystick: Controls tank turret rotation and possibly other functions.
- Right Joystick: Controls tank movement (forward/backward, left/right).
- Buttons:
- Machine Gun Sound: Activates machine gun sound effects.
- Turret Revolving: Controls turret rotation.
- Shooting: Fires the main cannon.
- Volume: Adjusts sound volume.
- Smoke: Activates the smoke generator function (if installed).
- Fn1, Fn2: Function buttons, typically programmable or for additional features.
5. Setup Instructions
Before installation, ensure your R/C tank is powered off and disconnected from any power source.
- Install Main Board: Carefully mount the TK-7.0 or TK-7.1 main board inside your tank's chassis. Ensure it is secured and protected from vibrations.
- Connect Power: Connect the main power input wires (labeled INPUT, typically red and black) from your tank's battery to the corresponding terminals on the main board. The input voltage is DC 7.2V.
- Connect Motors: Connect the tank's drive motors to the M1 and M2 ports on the main board. Ensure correct polarity for forward and reverse movement.
- Connect Turret/Cannon: Connect the turret rotation and cannon firing mechanisms to the appropriate ports (e.g., K1, K2, or other labeled ports) as per your tank model's wiring diagram.
- Connect Smoke Generator (Optional): If your tank has a smoke generator, connect it to the designated smoke port on the main board.
- Connect LED Lights (Optional): Connect any LED lights to the LED10 or other light-specific ports.
- Transmitter Batteries: Open the battery compartment on the rear of the transmitter (refer to Figure 3) and insert the required batteries (not included). Ensure correct polarity.
- Pairing (if necessary): Most 2.4GHz systems auto-bind. If not, consult your tank's specific manual for binding procedures. Generally, this involves powering on the transmitter, then the receiver while holding a bind button on the receiver or transmitter.

6. Operating Instructions
- Power On: First, turn on the transmitter. Then, power on your R/C tank (receiver board).
- Movement: Use the right joystick to control the tank's forward, backward, left, and right movements.
- Turret Control: Use the left joystick or designated buttons (e.g., 'Turret Revolving') to control the turret's rotation.
- Firing: Press the 'Shooting' button to fire the main cannon.
- Sound Effects: Use the 'Machine Gun Sound' button for machine gun effects and the 'Volume' button to adjust the overall sound level.
- Smoke Function: If equipped, press the 'Smoke' button to activate the smoke generator.
- Power Off: Always turn off the R/C tank (receiver board) first, then turn off the transmitter.
7. Maintenance
- Cleaning: Keep the transmitter and receiver board clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Storage: Store the components in a dry, cool place away from direct sunlight and moisture. Remove batteries from the transmitter if storing for extended periods.
- Connections: Periodically check all wiring connections for looseness or damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tank does not respond to transmitter. | Low transmitter/tank battery, un-paired, loose connections. | Replace/charge batteries. Re-pair transmitter and receiver. Check all wiring. |
| Erratic control or short range. | Interference, damaged antenna, low battery. | Move to an area with less interference. Check antenna for damage. Replace/charge batteries. |
| No sound effects. | Volume too low, speaker disconnected, board malfunction. | Increase volume. Check speaker connection to main board. |
| Smoke generator not working. | No smoke fluid, disconnected, faulty unit. | Add smoke fluid. Check connections. Test smoke unit separately if possible. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Heng Long (YUKALA) |
| Material | Metal |
| For Vehicle Type | TANK (1/16 R/C) |
| RC Parts & Accs | Transmitters, Receiver Boards |
| Remote Control Peripherals/Devices | Remote Controller |
| Is Electric | No Battery (requires external power) |
| Batteries Included | No |
| Charger/Adapter Included | No |
| Quantity | 1 pcs |
| Recommend Age | 14+ years |
| Use | Vehicles & Remote Control Toys |
| Certification | CE |
| Origin | Mainland China |
| Package Dimensions (approx.) | Length: 10 cm, Width: 20 cm, Height: 20 cm |
| Package Weight (approx.) | 0.1 kg |
10. User Tips
- Sound Customization: Many users are interested in the specific tank sound effects. Explore the various sound options and settings available through the main board or transmitter functions to find your preferred tank sounds.
- Firmware Updates: Check the official Heng Long website or your seller's support page for any available firmware updates for your TK-7.0/7.1 board, which may offer new features or improvements.
- Wiring Diagrams: Always refer to the specific wiring diagram for your R/C tank model when connecting the main board to ensure all components are correctly installed.
11. Warranty and Support
For warranty information, technical support, or replacement parts, please contact the seller, Speed Tech RC Store, directly. Keep your purchase receipt as proof of purchase.