Jonsbo CR-201

Contents

Jonsbo CR-201 CPU Cooler Instruction Manual

Model: CR-201

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Jonsbo CR-201 CPU Cooler. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

The Jonsbo CR-201 is a high-performance tower-style CPU air cooler featuring four pure copper heat pipes for efficient heat dissipation, a silent PWM fan, and AURA RGB lighting for customizable aesthetics. It is designed to support a wide range of Intel and AMD CPU sockets.

Specifications

FeatureSpecification
Model NumberCR-201
Cooler TypeTower
Heatpipes4 (Pure Copper Direct Contact)
Supported CPU SocketsIntel: LGA 775, LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA 1700
AMD: Socket FM1, Socket FM2, Socket AM2, Socket AM2+, Socket FM2+, Socket AM3+, AM4
TDP≤135W
Fan Speed800 - 1500rpm (±10%)
Power Interface4PIN PWM
Fan Life40000 hrs
Blade Quantity9
Bearing TypeFluid Bearing
Air Volume21.6 - 52.1 CFM
Noise Level18.5 - 30.8 dBa
VoltageDC 12V
Product Dimensions (L x W x H)129mm x 94mm x 160mm
Net Weight971g
RGB SupportA-RGB (AURA Color Control)

Note: Product standard parameters may vary slightly due to product upgrades or other reasons. Please refer to the actual product.

Product Parameters Table
Detailed product parameters table.
Jonsbo CR-201 CPU Cooler Dimensions
Dimensions of the Jonsbo CR-201 CPU Cooler.

Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.

  • Jonsbo CR-201 CPU Cooler (Heatsink with pre-installed fan)
  • Intel Mounting Brackets (for LGA 775/1150/1151/1155/1156)
  • AMD Mounting Brackets (for AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1)
  • Backplate
  • Mounting Screws and Standoffs
  • Thermal Grease
  • User Manual (this document)
Jonsbo CR-201 Mounting Hardware and Thermal Paste
Included mounting hardware and thermal grease.

Installation Guide

Before proceeding, ensure your computer is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent damage to components.

1. Prepare the Motherboard

  • Remove your existing CPU cooler.
  • Clean any old thermal paste from the CPU surface and the motherboard.
  • Identify the correct mounting brackets for your CPU socket (Intel or AMD).
  • Attach the appropriate backplate to the rear of your motherboard, aligning it with the CPU cooler mounting holes.

2. Install Mounting Brackets

  • Secure the chosen Intel or AMD mounting brackets to the front side of the motherboard using the provided screws and standoffs. Ensure they are firmly attached.

3. Apply Thermal Grease

  • Apply a small amount of the included thermal grease to the center of your CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient. Do not spread it manually; the pressure from the cooler will spread it evenly.

4. Mount the CPU Cooler

  • Carefully place the Jonsbo CR-201 cooler onto the CPU, aligning the cooler's base with the mounting screws on the brackets.
  • Tighten the screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) gradually until the cooler is securely seated. Do not overtighten.

5. Connect Cables

  • Fan Power (4PIN PWM): Connect the cooler's 4PIN fan cable to the "CPU_FAN" header on your motherboard. This allows for PWM control of the fan speed.
  • AURA RGB Lighting: The CR-201 features AURA RGB lighting. Connect the AURA interface cable from the cooler to a compatible AURA header on your motherboard. The AURA interfaces can be connected interchangeably. The male header can be daisy-chained to other AURA devices if desired.
Jonsbo CR-201 Connection Diagram
Connection diagram for fan power and AURA RGB lighting.

Important Note: Ensure your PC chassis has sufficient clearance for the cooler's height (160mm) before installation. It is suitable for ATX chassis with a width of 185mm or more, and the CPU height limit in the chassis must be greater than 160mm.

Operating Instructions

Fan Operation

The CR-201 fan operates via a 4PIN PWM connection, allowing your motherboard to dynamically control its speed based on CPU temperature. This ensures optimal cooling performance while minimizing noise when the system is under light load.

AURA RGB Lighting Control

The cooler features a honeycomb-shaped light-emitting module on its top and an axial light-emitting fan. When connected to a compatible motherboard AURA header, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).

Available lighting effects typically include:

  • Monochrome fixed colors (Red, Blue, Yellow, Green, Purple, White)
  • Multi-color circulation
  • Breathing effects
  • Flashing effects
  • Other dynamic light effect changes
Jonsbo CR-201 AURA Color Control
The cooler supports AURA color control for various lighting effects.
Jonsbo CR-201 Honeycomb RGB
Honeycomb design with AURA RGB lighting, note: requires AURA-compatible motherboard.

Maintenance

Regular maintenance helps ensure optimal performance and extends the lifespan of your CPU cooler.

  • Dust Cleaning: Periodically (e.g., every 3-6 months), power off your computer and use compressed air to remove dust buildup from the heatsink fins and fan blades. Hold the fan blades gently to prevent them from spinning rapidly during cleaning, which can damage the bearings.
  • Fan Bearings: The CR-201 uses hydraulic bearings, which are designed for long-term use with a sealed design and large oil storage space, contributing to a long service life. No user maintenance is required for the bearings themselves.
  • Thermal Paste: While not frequently necessary, if you remove the cooler for any reason, it is recommended to clean off the old thermal paste from both the CPU and the cooler's base and apply fresh thermal paste before reinstallation.
Jonsbo CR-201 Hydraulic Bearings
The fan features durable hydraulic bearings for extended lifespan.

Troubleshooting

  • Fan Not Spinning:
    • Ensure the 4PIN fan cable is securely connected to the "CPU_FAN" header on your motherboard.
    • Check your motherboard's BIOS/UEFI settings to ensure the CPU fan header is enabled and configured correctly (e.g., not set to a very low RPM threshold).
  • RGB Lighting Not Working/Incorrect Colors:
    • Verify the AURA RGB cable is correctly connected to a compatible AURA header on your motherboard.
    • Ensure your motherboard's RGB software is installed and updated.
    • Check the software settings to confirm RGB effects are enabled and configured as desired.
    • Note that the acrylic light guide material may have a 6mm injection molding line on the edge of each hole. This is a normal manufacturing process phenomenon and does not affect the light effect or indicate a defect.
  • High CPU Temperatures:
    • Confirm the cooler is securely mounted and making good contact with the CPU.
    • Ensure thermal paste was applied correctly.
    • Check for excessive dust buildup on the heatsink fins and fan, and clean if necessary.
    • Verify the fan is spinning at an appropriate speed (check BIOS/UEFI or monitoring software).
    • Ensure adequate airflow within your PC case.
  • Cooler Not Fitting in Case:
    • The CR-201 has a height of 160mm. Ensure your PC chassis has a CPU cooler height limit greater than 160mm.
Warm Tips - Bonding Line on Acrylic
Explanation of bonding lines on the acrylic light guide material as a normal manufacturing process.

User Tips

  • For optimal RGB synchronization, ensure your motherboard supports AURA Sync or a similar RGB control technology and that the cooler's RGB cable is connected to the correct header.
  • When installing, double-check the orientation of the cooler to ensure the fan directs airflow efficiently, typically towards the rear exhaust fan or top exhaust fans of your case.
  • Consider running a stress test after installation to verify stable temperatures under load.

Warranty and Support

Jonsbo products are manufactured to high-quality standards. For warranty information, please refer to the warranty policy provided by your retailer or contact Jonsbo customer support directly. Keep your proof of purchase for warranty claims.

For technical assistance or further inquiries, please contact the seller or Jonsbo customer service.

© 2023 Jonsbo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.