UGREEN CM630

Contents

UGREEN HDMI Video Capture Card User Manual

Model: CM630

Introduction

The UGREEN HDMI Video Capture Card (Model CM630) is designed to capture high-quality video and audio from various HDMI sources and transfer it to a computer for recording, live streaming, or video conferencing. It supports 4K@60Hz HDMI input and loop-out, with 1080P@60Hz capture recording, offering a seamless experience for content creators, gamers, and professionals.

UGREEN HDMI Video Capture Card with included cables

UGREEN HDMI Video Capture Card (CM630) and accessories.

Package Contents

Please verify that all items are present in your package:

  • UGREEN 4K Video Capture Card x 1
  • 5FT HDMI 2.0 Cable x 1
  • 1.5FT 2-in-1 USB A and C Cable x 1
  • User Manual x 1
  • OBS Studio Quick Start Guide x 1
Package contents of UGREEN HDMI Video Capture Card

Contents of the UGREEN HDMI Video Capture Card package.

Setup Instructions

Follow these steps to connect your UGREEN HDMI Video Capture Card:

1. HDCP Disabling for Gaming Consoles (PS4/PS5)

For HDCP supported devices like PS4 or PS5, you must disable HDCP before video capture can function. This is a crucial step to ensure proper signal transmission.

  • PS4: Navigate to Settings > System > Start HDCP > Cancel/Close > Restart PS4.
  • PS5: Navigate to Settings > System > HDMI section of the PS4/PS5 interface, and turn off Enable HDCP.
  • Switch/Xbox: HDCP will activate when media apps such as Netflix or Hulu are started. HDCP automatically turns off when the media app is quit. If the signal does not come back, then restart the console.
HDCP disabling instructions for PS4 and PS5

Instructions for disabling HDCP on PS4 and PS5.

2. Hardware Connection

  1. Connect the HDMI cable from your source device (e.g., PS5, camera, TV Box) to the HDMI IN port on the capture card.
  2. Connect the 2-in-1 USB A and C cable from the capture card's USB-C port to a USB 3.0 port on your Laptop/PC.
  3. (Optional) Connect an additional HDMI cable (not included) from the capture card's HDMI OUT port to your HDTV or monitor for video loop-out. This allows you to view your content on a larger screen without latency.
  4. (Optional) Connect your headphones to the 3.5mm headphone jack and your microphone to the 3.5mm microphone jack on the capture card if needed for audio monitoring and commentary.

Video: How to Use UGREEN Video Capture Card (CM630) - Demonstrates connection steps.

Diagram showing connections for UGREEN HDMI Video Capture Card

Connection diagram for various devices including laptop, computer, headphones, microphone, monitor, HD TV, projector, TV box, camera, phone, DV, and game console.

Operating Instructions (OBS Studio)

The UGREEN HDMI Video Capture Card is compatible with popular recording software like OBS Studio, Potplayer, XSplit, and QuickTime Player. Here are general steps for setting up with OBS Studio:

  1. Open OBS Studio on your computer.
  2. In the "Sources" panel, click the " + " icon to add a new source.
  3. Select "Video Capture Device" from the list.
  4. Choose "Create new" and give it a name (e.g., "UGREEN Capture"). Click "OK".
  5. In the properties window, select "UGREEN HDMI Capture" from the "Device" dropdown.
  6. Set the "Resolution" to 1920x1080 and "Frame rate" to 60 FPS for optimal 1080p60 capture.
  7. Check "Use custom audio device" at the bottom of the Video Capture Device properties.
  8. Select "UGREEN HDMI Capture" as the Audio Device.
  9. Click "OK" to apply settings.
  10. To monitor audio, click the settings cog icon in the "Audio Mixer" panel for your "Video Capture Device" source.
  11. Select "Advanced Audio Properties".
  12. For the "Video Capture Device" audio, set "Audio Monitoring" to "Monitor and Output".
OBS Studio setup steps 1-3 for video capture device

OBS Studio: Adding a Video Capture Device source.

OBS Studio setup steps 4-6 for audio settings

OBS Studio: Configuring video resolution, frame rate, and audio monitoring.

Once configured, you can start streaming or recording using the controls in OBS Studio.

Maintenance

To ensure the longevity and optimal performance of your UGREEN HDMI Video Capture Card:

  • Keep the device in a clean, dry environment, away from direct sunlight and extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.
  • Clean the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Ensure proper ventilation around the device to prevent overheating, especially during extended use. The device features multiple cooling mechanisms for efficient heat dissipation.
Close-up of the UGREEN capture card showing ventilation for heat dissipation

The capture card features multiple cooling vents for efficient heat dissipation.

Troubleshooting

  • No Signal/Black Screen:
    • Ensure all cables are securely connected.
    • Verify that HDCP is disabled on your source device (e.g., PS4/PS5). Refer to the "HDCP Disabling" section in Setup.
    • If using a mobile phone or TV set-top box, contact customer service to turn off the HDCP function if the capture function cannot be used.
    • Try restarting your source console (Switch/Xbox) if the signal does not return after quitting a media app.
  • Green Glares/Distorted Video:
    • This can often be resolved by correctly disabling HDCP on the source device.
    • Check your software settings (e.g., OBS Studio) for correct resolution and frame rate.
  • No Audio:
    • Ensure the audio input device is correctly selected in your recording software (e.g., "UGREEN HDMI Capture" in OBS Studio).
    • Verify that the audio monitoring is set to "Monitor and Output" in OBS Studio's Advanced Audio Properties.
    • Check the volume levels on both your source device and computer.
  • Lag or Choppy Video:
    • Ensure you are using a USB 3.0 port on your computer for the capture card.
    • Close unnecessary applications on your computer to free up system resources.
    • Lower the capture resolution or frame rate in your software settings if your computer struggles to process the video.

Product Specifications

Table of UGREEN HDMI Video Capture Card product specifications

Detailed product specifications for the UGREEN HDMI Video Capture Card.

FeatureDetail
Brand NameUGREEN
Product NameHDMI Video Capture Card
Model No.CM630
Input PortHDMI 4K/60Hz (YCbCr4:2:0)
Output PortHDMI 4K/60Hz (YCbCr4:2:0)
Capture PortUSB-C (1080P60Hz)
Capture FormatYUY2/MJPEG
Video FormatRGB 8/10/12 bpc, YCbCr4:4:4, YCbCr4:2:0, 8/10/12bpc
Audio FormatPCM2.0
Shell MaterialABS+PC
CompatibilityWindows 10/8.1/7, macOS, Linux, Android 5.0, iOS
SoftwareOBS Studio, XSplit, Potplayer, QuickTime Player
Product Weight95g
Warranty1 Year
Dimensions of the UGREEN HDMI Video Capture Card: 270mm x 164mm x 80mm

Product dimensions: 270mm (length) x 164mm (width) x 80mm (height).

User Tips

  • Audio Capture: The device supports capturing audio from the HDMI input source. Ensure the correct audio device is selected in your recording software.
  • Video Format: If experiencing issues with video and audio, try selecting YUV as the video format in your capture software settings.
  • Resolution and FPS: While the device supports 4K@60Hz HDMI input and loop-out, the maximum capture recording resolution is 1080P@60Hz. Some users have reported successful capture at 1440p@30Hz.
  • Stability: The capture card is noted for stable performance and does not typically overheat, even during extended use.
  • Included Cables: The product comes with high-quality cables, including a 5FT HDMI 2.0 cable and a 1.5FT 2-in-1 USB A and C cable.
  • Discord Streaming: The capture card works effectively for streaming games from consoles like Nintendo Switch to platforms like Discord without noticeable lag.

Warranty and Support

The UGREEN HDMI Video Capture Card comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact UGREEN customer service through their official website or the retailer where the product was purchased.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.