1. Introduction
The Bakon BK210 is a portable, wireless electric soldering iron designed for precision soldering tasks. Featuring a C210 integrated heating core, PID temperature control, and an auto-sleep function, it offers efficient and safe operation for various electronics repair and DIY projects. This manual provides essential information for the safe and effective use of your BK210 soldering iron.
2. Safety Information
- Always wear appropriate eye protection when soldering.
- Ensure adequate ventilation to avoid inhaling solder fumes.
- The soldering iron tip can reach very high temperatures. Avoid direct contact with skin or flammable materials.
- Place the soldering iron in its stand when not in use.
- Do not use the soldering iron near explosive gases or materials.
- Keep out of reach of children.
- Ensure the battery is installed with correct polarity to prevent damage to the device.
3. Package Contents
Please check the box for the following items:
- 1 x Bakon BK210 Lithium Iron Host
- 1 x Type-C Charging Cable
- 1 x Solder Iron Holder with Clean Wet Water Sponge
- 1 x Tin Wire Pen (Solder Tube)
- 1 x Temperature Resistant Sleeve
- 1 x C210 Integrated Heating Core

4. Setup
4.1 Battery Installation
Important Notice: Battery is NOT INCLUDED in the package. You need to prepare your own 18650 flat head lithium battery with a capacity of not less than 3000Amh.
- Unscrew the back cap of the soldering iron handle.
- Carefully insert the 18650 lithium battery, ensuring the positive electrode aligns with the '+' marking and the negative electrode aligns with the '-' marking inside the compartment. Incorrect polarity can damage the device.
- Screw the back cap firmly back into place.

4.2 Tip Installation
- Ensure the soldering iron is powered off and cool.
- Gently insert the C210 integrated heating core (soldering tip) into the front end of the soldering iron handle.
- Twist slightly to ensure it is securely seated.

4.3 Charging
Connect the Type-C charging cable to the soldering iron's charging port and a suitable 5V DC power source. The device supports charging while welding.
5. Operating Instructions
5.1 Power On/Off
- Power On: Long press the power button (center button) to turn on the soldering iron. The LED screen will display the current temperature.
- Power Off: Long press the power button again to turn off the soldering iron.
5.2 Temperature Adjustment
- Use the 'Temperature +' button (up arrow) to increase the temperature.
- Use the 'Temperature -' button (down arrow) to decrease the temperature.
- Once the desired temperature is set, click the power button to confirm the setting.

5.3 Parameter Settings (Advanced)
To enter the setting interface, press and hold both the 'Temperature +' and 'Temperature -' buttons simultaneously. Use the 'Temperature +' and 'Temperature -' buttons to navigate through the settings (F01, F02, F03, F04) and the power button to select/confirm.
- F01: Sleep time setting: Adjust the automatic sleep time from 2 to 99 seconds.
- F02: Unit switching: Toggle between Celsius (°C) and Fahrenheit (°F).
- F03: Restore default settings: Reset all settings to factory defaults.
- F04: Temperature compensation setting: Adjust temperature compensation within a range of ±80℃.
To exit the setting interface, press and hold both the 'Temperature +' and 'Temperature -' buttons simultaneously.
5.4 Soldering Process
The BK210 features quick heating and tin melting capabilities:
- The C210 heating element heats up in approximately 10 seconds.
- Tin can melt in approximately 10 seconds.
The soldering iron can reach a maximum temperature of 450°C for effective soldering.
6. Maintenance
6.1 Tip Cleaning
Regularly clean the soldering tip to ensure optimal performance and longevity:
- Use the provided wet sponge to wipe off excess solder and oxidation from the tip.
- Ensure the sponge is damp, not soaking wet, to avoid thermal shock to the tip.
- Tin the tip with a small amount of fresh solder after cleaning and before storage.
6.2 General Care
- Store the soldering iron in a dry, safe place when not in use.
- Avoid dropping the device or subjecting it to strong impacts.
- Do not attempt to disassemble the internal components beyond battery replacement.
7. Troubleshooting
- Soldering iron not heating: Check if the battery is correctly installed and charged. Ensure the power button has been long-pressed to turn on the device.
- Poor solder joints: Ensure the soldering tip is clean and properly tinned. Verify the temperature setting is appropriate for the solder and components being used.
- Device not turning on: Check battery charge and installation. If issues persist, contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | BK210 |
| Dimensions | Length 146mm |
| Output Temperature | 180℃-450℃ |
| Temperature Stability | Good |
| Certification | CE, RoHS |
| Power | 12W |
| Interface | USB Type-C |
| Heating Core | C210 Integrated Tip |
| Heating Up Time | About 10 seconds |
| Melting Tin Time | About 10 seconds |
| Auto Sleep | User Settings (2-99s) |
| Charging Time | About 2.5 hours (for 3000Amh battery) |
| Max Endurance Time | About 60 minutes (for 3000Amh battery) |
| Weight | 75g |
| Charging Voltage | DC5V |
9. User Tips
- Spare Tips: If you need replacement C210 integrated heating cores, please contact the seller or an authorized distributor to ensure compatibility and quality.
- Battery Choice: Always use a high-quality 18650 flat head lithium battery with at least 3000Amh capacity for optimal performance and endurance.
- Portability: The compact size makes it ideal for on-the-go repairs. Consider a small carrying case to protect it.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's official website or contact their customer service directly. Keep your purchase receipt as proof of purchase.