MiLESEEY DTX10

Contents

MiLESEEY ACEGMET DTX10 3-IN-1 Measuring Equipment User Manual

Model: DTX10 | Brand: MiLESEEY

Introduction

The MiLESEEY ACEGMET DTX10 is a versatile 3-in-1 measuring device designed for precision and efficiency. It integrates a digital tape measure, a laser distance meter, and a green laser line for accurate alignment. This tool is suitable for designers, builders, wood craftsmen, and DIY enthusiasts, offering advanced features to streamline various measurement tasks.

ACEGMET DTX10 3-IN-1 Measuring Equipment
The ACEGMET DTX10 3-IN-1 Measuring Equipment with active red and green lasers and extended tape.

What's in the Box

Upon unboxing your MiLESEEY ACEGMET DTX10, please ensure all the following items are present:

  • DTX10 Digital Tape Measure (1 unit)
  • USB Cable (1 unit)
  • Carry Case (1 unit)
  • Paper Manual (1 unit)
  • Gift Box (1 unit)
Contents of the DTX10 box
All components included in the DTX10 package.

Specifications

FeatureDescription
Brand NameMiLESEEY
Model NumberDTX10
Power TypeRechargeable
Battery IncludedYes
OriginMainland China
Measurement RangeUp to 100m (Laser)
Digital Accuracy±1/16 inch
Tape Blade25mm steel, 2.5m standout distance
Display2.0" IPS Display
Laser TypeRed (distance), Green (line)
Data Storage100 groups
ConnectivityBluetooth

Setup

1. Charging the Device

The DTX10 is equipped with a rechargeable battery. Before first use, or when the battery indicator shows low power, connect the device to a power source using the provided USB cable. The charging indicator will show the charging status.

2. Power On/Off

To power on the device, press and hold the power button (usually marked with a power symbol or a prominent button). To power off, press and hold the same button again.

3. Unit Selection

The DTX10 supports both metric (meters, centimeters) and imperial (feet, inches) units. To switch between units, locate the unit selection button (refer to the device's physical buttons, often labeled 'UNIT' or similar, or check the on-screen menu). Press this button to cycle through available units until your desired unit is displayed.

4. Display Settings

The device features an intelligent display with 'Big Text' and options for white text on a black screen or black text on a white screen. These settings can be adjusted via the device's menu or dedicated display buttons to optimize readability in various lighting conditions.

DTX10 display modes
Various display modes for optimal visibility in different environments.

Operating Instructions

1. Digital Tape Measure Function

The DTX10's digital tape measure provides precise measurements with a digital display. Pull out the tape blade to the desired length. The measurement will be shown on the IPS display. The patented double calibration codes and photoelectric decoding sensor ensure high accuracy.

  • Incremental Measurement: To reset the display to zero at any point on the tape, press the designated 'Zero' or 'Reset' button. This allows for seamless incremental measurements without manual calculations.
  • Green Laser Line: Activate the green laser line for precise alignment. This laser projects a line that helps align the tape markings with your measurement points on an object, enhancing accuracy.
Seamless distance increments with green laser
The digital display showing seamless distance increments with the green laser line for precise marking.
Digital accuracy of the tape measure
Close-up of the digital display showing high accuracy measurement.

2. Laser Distance Meter Function

The DTX10 features an advanced laser measure capable of extending measurements up to 100 meters (390 feet).

  • Single Measurement: Point the device's laser emitter at the target and press the laser measurement button (often marked with a laser icon). The distance will be displayed instantly.
  • Continuous Measurement: Activate continuous measurement mode (refer to the manual for specific button presses). This mode allows you to move the device and see real-time distance updates, useful for finding minimum/maximum distances.
Digital tape and laser precise measurements
Demonstration of both digitally reliable tape measurement and laser precise measurement.

3. Advanced Measurement Functions

The DTX10 includes several advanced functions for complex measurements:

  • Area Measurement: Take two perpendicular distance measurements (length and width) using the laser. The device will automatically calculate and display the area.
  • Volume Measurement: Take three perpendicular distance measurements (length, width, and height). The device will calculate and display the volume.
  • Auto Vertical Height & Horizontal Distance Finding: Utilize the device's inclinometer and laser to measure heights and horizontal distances indirectly, often using the Pythagorean theorem. Consult the detailed manual for specific steps for these functions.
Area measurement using DTX10
Visual representation of area calculation using the laser measurement function.

Bluetooth Connectivity & App

The DTX10 can connect to mobile devices (smartphones or tablets) via Bluetooth, allowing real-time data transmission to an intelligent sketching app (e.g., 'Smart Life' app). This feature enables:

  • Data Transfer: Send acquired measurements directly to your device for digital record-keeping.
  • Realistic Annotation: Use the app to annotate measurements on photos or floor plans, enhancing project planning and documentation.
  • Data Storage: The device supports storing up to 100 groups of measurement data, which can be managed and reviewed through the app.

To connect:

  1. Ensure Bluetooth is enabled on your mobile device.
  2. Download and install the 'Smart Life' app (available on App Store and Google Play).
  3. Open the app and follow the on-screen instructions to pair with your DTX10 device.
DTX10 with Smart Life app
The DTX10 integrating with the 'Smart Life' smartphone application.
Floor plan annotation in app
Example of floor plan annotation and data display within the companion app.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
  • Storage: Store the DTX10 in its carry case in a cool, dry place when not in use.
  • Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in constant use.
  • Laser Lens: Keep the laser emitter and receiver lenses clean to ensure accurate measurements.

Troubleshooting

ProblemPossible Cause / Solution
Device does not power onBattery is low or depleted. Charge the device using the USB cable.
Inaccurate measurementsEnsure laser lenses are clean. Check for obstructions. Verify correct measurement mode is selected. Ensure the device is held steady.
Cannot switch units (metric/imperial)Refer to the manual for the specific unit selection button and procedure. Ensure the device is not in a specific measurement mode that locks units.
Bluetooth connection issuesEnsure Bluetooth is enabled on both devices. Make sure the DTX10 is in pairing mode. Restart both the DTX10 and the mobile device. Check the 'Smart Life' app for connection instructions.
Display is difficult to readAdjust the display settings (e.g., 'Big Text', white/black background) to suit ambient lighting conditions.

User Tips

  • Unit Flexibility: The DTX10 allows switching between metric and imperial units. Familiarize yourself with the unit selection button to quickly adapt to different project requirements.
  • Careful Handling: While the DTX10 features a robust design, it is an electronic measuring instrument. Handle it with care to prevent damage from drops or impacts.
  • Avoid Water Exposure: The product description does not specify water resistance. To ensure longevity, avoid exposing the device to water or high humidity.
  • Leverage the App: For complex projects or detailed record-keeping, utilize the Bluetooth connectivity and the 'Smart Life' app to store, organize, and annotate your measurements. This can significantly improve workflow and accuracy.

Warranty & Support

MiLESEEY provides comprehensive support for the ACEGMET DTX10:

  • Warranty: The product comes with an 18-month worry-free warranty.
  • Customer Service: Benefit from one-on-one customer service and 24/7 priority access to support for any inquiries or issues you may encounter.
Product demonstration video showcasing the DTX10's features and usage.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.