SPORTARC 48V 350W/400W 17A Brushless Controller

Contents

SPORTARC 48V 350W/400W 17A Ebike Brushless Controller Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your SPORTARC 48V 350W/400W 17A Ebike Brushless Controller. This controller is designed for electric scooters and e-bikes, featuring dual-mode functionality for versatile motor control. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

⚠️ Disclaimer: Please be aware of potential fire risks associated with electrical components. Always strictly follow the instruction manual for charging and storage of your e-bike's battery and related components. Improper handling can lead to serious injury or damage.

  • Ensure all connections are secure and properly insulated to prevent short circuits.
  • Do not operate the controller if it appears damaged or has been exposed to water.
  • Installation should ideally be performed by a qualified technician.
  • Always disconnect the battery before performing any maintenance or wiring changes.

3. Product Overview

The SPORTARC Brushless Controller is a key component for your electric vehicle, managing power delivery to the motor. It features a robust aluminum casing for durability and heat dissipation.

Package Contents:

  • 1 x Motor Controller

Visual Reference:

SPORTARC Ebike Brushless Controller with various colored wires and connectors.
Figure 3.1: An overview of the SPORTARC Ebike Brushless Controller, showing its compact design and the array of connection wires for various e-bike components.
Close-up of the controller's signal wire connectors and battery power connector.
Figure 3.2: Detailed view of the controller's smaller signal wire connectors (often for throttle, brake, display) and the main battery power connector.

4. Specifications

FeatureDetail
Brand NameSPORTARC
OriginMainland China
MaterialAluminum
ColorSilver
Voltage48V
Power Output350W / 400W
Current17A
Controller TypeBrushless, Dual Mode
Weight (approx.)300g (350W) / 350g (400W)
Dimensions (48V 350W)84mm x 53mm x 30mm
Dimensions (48V 400W)89mm x 48mm x 28mm

Dimensional Diagrams:

Dimensions of the 48V 350W Ebike Brushless Controller: 84mm length, 53mm width, 30mm height.
Figure 4.1: Dimensions for the 48V 350W controller variant.
Dimensions of the 48V 400W Ebike Brushless Controller: 89mm length, 48mm width, 28mm height.
Figure 4.2: Dimensions for the 48V 400W controller variant.

5. Setup and Installation

Proper installation is crucial for the performance and safety of your e-bike. Refer to the wiring diagram below and ensure all connections are made correctly.

General Wiring Guide:

  1. Battery Connection: Connect the main power wires (usually thicker red for positive, black for negative) from the controller to your 48V battery. Ensure polarity is correct.
  2. Motor Phase Wires: Connect the three thick motor phase wires (typically green, blue, yellow) from the controller to the corresponding motor wires.
  3. Hall Sensor Wires: Connect the smaller Hall sensor wires (usually a 5-wire connector: red, black, green, blue, yellow) from the controller to the motor's Hall sensor connector.
  4. Throttle Connection: Connect the throttle wires (typically red, black, green) to the controller's throttle input.
  5. Brake Levers: Connect the brake lever wires (usually two wires per lever) to the controller's brake input. These often cut power to the motor when activated.
  6. Display/Meter: If applicable, connect the display unit to the controller's display interface.
  7. Self-Learning Wires: Some controllers have self-learning wires (often two white wires). These are used to automatically match the motor's phase and Hall sensor sequence. Connect them briefly, let the motor spin, then disconnect.
  8. Other Connections: Depending on your e-bike's features, there may be connections for pedal assist sensor (PAS), cruise control, anti-theft, etc. Refer to your e-bike's specific wiring diagram if available.

Always double-check all connections before powering on the system. Incorrect wiring can damage the controller, motor, or battery.

6. Operating Instructions

Once the controller is correctly installed and all connections are secure:

  1. Power On: Turn on your e-bike's battery and then the main power switch (if separate).
  2. Throttle Control: Gently twist the throttle to engage the motor. The speed will increase with further throttle input.
  3. Brake Function: Activating the brake levers should cut power to the motor, even if the throttle is engaged.
  4. Dual Mode Operation: This controller supports dual mode, meaning it can operate with or without Hall sensors. If Hall sensors fail, the controller can often continue to operate in a sensorless mode, providing a backup.
  5. Monitoring: If you have a display unit, monitor speed, battery level, and other relevant parameters during operation.

7. Maintenance

To ensure the longevity and optimal performance of your controller:

  • Keep Clean: Regularly clean the exterior of the controller to prevent dust and dirt buildup, which can affect heat dissipation.
  • Check Connections: Periodically inspect all wiring connections for looseness, corrosion, or damage. Tighten any loose connections.
  • Avoid Water Exposure: While the controller may offer some water resistance, avoid direct exposure to heavy rain or submersion.
  • Temperature Management: Ensure the controller is mounted in a location with adequate airflow to prevent overheating, especially during prolonged high-power usage.
  • Storage: When not in use for extended periods, store the e-bike and controller in a dry, cool environment.

8. Troubleshooting

If you encounter issues with your controller, consider the following common problems and solutions:

ProblemPossible CauseSolution
Motor not runningLoose battery connection, faulty throttle, brake engaged, motor/Hall sensor issue.Check battery connection, test throttle, ensure brakes are disengaged, check motor/Hall sensor wiring. Try self-learning wires if available.
Motor runs intermittentlyLoose wiring, intermittent throttle signal, overheating.Inspect all connections, check throttle wiring, allow controller to cool down.
Motor makes unusual noiseIncorrect motor phase/Hall sensor wiring, damaged motor.Verify motor and Hall sensor connections. If noise persists, motor may be damaged.
Controller gets hot quicklyOverload, insufficient cooling, short circuit.Reduce load, ensure proper ventilation, check for short circuits in wiring.

If troubleshooting steps do not resolve the issue, consult a professional e-bike technician.

9. User Tips

  • Wire Management: Use zip ties or cable wraps to neatly organize and secure all wires. This prevents snagging, wear, and potential disconnections.
  • Waterproofing: While the aluminum casing offers some protection, consider adding extra sealant around cable entry points if you frequently ride in wet conditions.
  • Test Connections: Before fully assembling your e-bike, perform a basic power-on test to ensure the motor responds correctly to the throttle and brakes.
  • Compatibility: Always ensure your motor's voltage and wattage are compatible with the controller's specifications to prevent damage.

10. Warranty and Support

For warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

11. Product Video

Watch this video for a visual overview of the SPORTARC Ebike Brushless Controller.

Video 11.1: A short video showcasing the SPORTARC Ebike Brushless Controller and its various features.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.