1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your JOYING 9"/10" Universal 2DIN Android Car Stereo. This advanced head unit features a Qualcomm Snapdragon processor, Android 13 operating system, wireless CarPlay and Android Auto, HDMI output, GPS navigation, FM radio, and a Digital Sound Processor (DSP) for an enhanced in-car audio experience. Please read this manual thoroughly before use to ensure proper functionality and safety.
2. Safety Precautions
2.1. General Safety
- When driving, adjust the sound volume to an appropriate level to perceive driving situations and ensure safety.
- Do not watch videos or operate the car radio while driving to ensure driving safety and comply with traffic laws.
- To avoid short circuits, do not expose this unit to rain.
- To prevent short circuits, do not place or leave any metal objects (such as coins or metal tools) inside the car radio.
- Operate the car radio according to this manual. Do not open the audio system for repair. If repair is required, contact a professional repair station or the seller directly.
- Do not operate the car stereo for an extended time when the engine is off, as it will drain the battery.
- Do not insert objects into the ventilation slots or other openings on the car radio.
- Do not touch, rub, or strike the screen with sharp objects.
2.2. Maintenance Precautions
- The screen must be protected from moisture, dust, steam, and oily smoke.
- Avoid prolonged exposure of the screen to direct sunlight.
- Protect the stereo from heavy pressure and impact.
- Do not connect other power sources to the car radio, as this may burn internal components.
- If the screen is stained, clean it with a soft and clean cloth.
3. Package Contents
Verify that all items listed below are included in your package:

Figure 3.1: Package Contents Overview
- Single Din Cage
- Mounting Sleeve
- Left & Right Bracket
- Plastic Trim Out
- Extraction Keys
- Installation Manual
- WiFi Antenna *1
- GPS Antenna *1
- 4G Antenna *2
- External Mic *1
- USB Cable *2
- AR Cable *1
- Screen Ribbon Cable *1
- ISO Cable *1
- User Manual (PDF reference: View User Manual PDF)
4. Setup and Installation
4.1. Installation Structure Adjustment
The left and right brackets can be extended or telescoped to achieve the best fixing position according to your car's center console, adapting to a wider range of vehicles.

Figure 4.1: Adjustable Installation Brackets
4.2. Screen Position Adjustment
The screen can be moved up or down with a maximum movement distance of about 24mm and a minimum movement distance of about 8mm, depending on the car center console.

Figure 4.2: Screen Position Adjustment Diagram
When the screen is moved up, remove the 4 clips behind the screen and adjust the distance to avoid covering the air conditioning button or vents. Move the clips to the right position.
4.3. Screen Depth Adjustment
Adjust the screen depth by adjusting the screw holes of the components. The minimum adjustment range is 5mm and the maximum adjustment range is 10mm.

Figure 4.3: Screen Depth Adjustment Diagram
4.4. Wiring Diagram
Refer to the diagram below for all port and connection details. Ensure all cables are connected securely and correctly.

Figure 4.4: Rear Panel Wiring Diagram
4.5. Setting a Custom Boot Logo
- Prepare a logo picture with the same resolution as your car radio (e.g., 1280x800, 1920x1080) and name it "Logo.BMP".
- Create a new folder named "Medialogos" on an empty USB disk. Place the "Logo.BMP" picture in this folder.
- Insert the USB disk into the car radio.
- Navigate to Settings > System > Factory (password: 8888) > Set boot logo to view the logo picture.
- After installing the "LogoSet.apk" (if not pre-installed), you can set the preset logo from the LogoSet app.
5. Operating Instructions
5.1. Basic Operation - Gesture Recognition
The car radio recognizes various gestures:
- Click: Single tap.
- Drag: Press and hold, then move.
- Press: Press and hold.
- Refers to more lines: Swipe up/down with two fingers.
- Swiping up and down: Single finger swipe up/down.
- Swipe left: Single finger swipe left.
The notification bar can be accessed by swiping your finger down from the status bar.
5.2. Main Interface Navigation
Press the home button on the status bar to display the home page. Key functions:
- Click to enter the home page.
- Click to return to the previous layer.
- Volume display.
- Click to close the application.
- Click to view all applications.
- Click to enter the settings.
- Click to set small window application.
To replace a small window app, click the small window settings button and select the desired application.
To replace a desktop widget, click the edit button in the upper right corner of the desktop widget and select the new widget.
Long press an APP icon at the bottom of the home page to choose a commonly used APP in the pop-up and set it as a shortcut.
5.3. Wallpaper Setting
The system wallpaper is divided into "light color" (day mode) and "dark color" (night mode). You can select a preferred wallpaper from the available options or import your own.
- Set the resolution of your custom picture to match the car radio's screen resolution. Save day mode pictures (light color tone) and night mode pictures (dark color tone).
- Create a folder named "wallpapers" in the root directory of your USB disk. Inside, create "day" and "night" folders.
- Within "day" and "night" folders, create subfolders named after the resolution (e.g., "1920x1080" for horizontal wallpaper).
- Copy day mode pictures to the "day" folder and night mode pictures to the "night" folder.
- Insert the USB flash drive into the USB port, open the "Wallpaper" APP, click "import", then search for the "wallpapers" folder and click "Start copying".
5.4. Radio Function (FM/AM)
FM Function:
- Drag left and right in the frequency area to quickly tune to the desired frequency.
- FM radio: Select FM band.
- Stereo/mono switch: Toggle between stereo and mono.
- Station name info: Edit station names for easier identification.
- Adjust station forward/backward: Long press to automatically search for channels.
- Last station: Go to the previous saved station.
- Play and pause: Control playback.
- LOC: Remote reception of broadcasts with long transmission distances, while short-range listening to local strong channels.
AM Function:
- AM radio: Select AM band.
- Auto-search for radio channels.
- Adjust station backwards: Long press to add the frequency for semi-automatic channel search.
- Open the favorite station list.
- Next station: Go to the next saved station.
- Select Favorite: Mark as your favorite radio station.
5.5. Bluetooth Operation
Bluetooth Dial:
- Dial pad: Make calls.
- Answer/dial: Answer incoming calls or dial numbers.
- Call history: View recent calls.
- Hang up: End a call.
- Phone book: Access contacts.
- Backspace: Delete characters.
- Refresh phonebook: Update contacts.
- Radio and phone calls are interchangeable.
- Microphone mute: Mute the microphone during a call.
Bluetooth Settings:
- Click the Bluetooth APP to enter the Bluetooth setting interface.
- Click [Bluetooth switch] to turn on or off Bluetooth.
- Click [Device name] to change the Bluetooth name.
- Click [Pin] to change the pairing password.
- Click [Auto pick set] to turn on or off auto answer.
- Click [WeChat voice switch] to turn on or off the message prompt tone.
- Click [Search Devices] to find the Bluetooth device to be connected.
Bluetooth Music Playback:
After connecting your mobile phone to the car radio via Bluetooth, click the Bluetooth music APP to enter the player page.
- Click to enter the mixer page.
- Last song: Go to the previous track.
- Pause/play: Control music playback.
- Next track: Go to the next track.
5.6. Music Player
Click the [Music] APP to enter the player page.
- Player page: Main music playback interface.
- Music list: Display available music tracks.
- Mixer page: Access sound settings.
- Last song: Go to the previous track.
- Pause/play: Control music playback.
- Next song: Go to the next track.
- Loop playback / single loop / random playback: Select playback mode.
- Favorite songs: Add songs to your favorites.
5.7. Video Player
- Picture-in-picture function: Enable video to play in a small window.
- Loop playback / single loop / random playback: Select video playback mode.
- Last video: Go to the previous video.
- Pause / play: Control video playback.
- Next video: Go to the next video.
- Favorite shows: Add videos to your favorites.
- File List: View available video files.
5.8. Sound Effects (DSP)
The unit features a TDA7851 DSP Chip and a 48-Band Graphic Equalizer for high-quality sound.

Figure 5.1: High-Quality Sound Features
HiFi Settings:
- Click the [Sound effects] APP to enter the sound effect setting interface.
- Select speaker channel (2ch, 2.1ch, 4ch, 4.1ch, 5.1ch).
- Click [DTS] to enable or disable the DTS sound effect.
EQ Selection:
- Click to enter the EQ setting.
- Click "System Sound" to access 20 preset sound effects (Standard, Rock, Soft, Classical, Popular, Hall, Jazz, Theater, News, Electronic sound).
- Tap "Simple Mode" or "Complex Mode" to enter the equalizer settings.
EQ Setting:
- The 48-band equalizer can be adjusted.
- Q value gain can be adjusted (High/Medium/Low).
- 3 groups of user memory equalizer adjustments are available.
- "Simple mode" allows setting sound effects for front and rear speakers separately.
- "Complex Mode" allows setting sound effects for each speaker independently.
- Click to restore the default value.
Sound Field Settings:
- Click to enter the sound field settings.
- Choose standard, main driving mode, co-driver mode, or full car mode.
- Adjust the desired sound field.
- Click to restore the default value.
5.9. DTS Scenes
- Click to enter the DTS scene mode interface.
- Enter "Scene Mode" to choose from 5 preset DTS scenes.
- Enter "Virtual Center" to set the center audio output on or off (DTS must be off when the center is on).
- Enter "Surround Mode" to adjust the surround effect for 5.1 speakers.
- Enter "Bass Boost" to adjust the output of different low frequencies for front, rear, and subwoofer.
- Enter "Sound Field Focus" to adjust the sound pitch of front, middle, and rear speakers.
- Enter "Subwoofer" to adjust the output of the subwoofer. When "Phase" switch is on, the output audio is inverted.
5.10. Professional Settings (DSP)
- Click to enter the DSP professional mode interface.
- Enter "Delay Function" to set the delay effect for speakers in different positions.
- Enter "Gain Adjustment" to increase the volume of the speakers in different positions.
- Enter "X-over" to achieve frequency division for front, middle, and rear speakers.
5.11. Car Settings
Link Settings:
- WLAN: Turn on Wi-Fi to connect to available networks.
- Mobile network: Connect to the network by activating data flow of the SIM card.
- Hotspot and network sharing: Share network via WLAN after inserting a SIM card.
- Bluetooth: Connect mobile phones to the car radio via Bluetooth.
Common Settings:
- Navigation and DVR: Enable automatic navigation on boot.
- Navigation app: Set a third-party navigation application as default.
- Satellite signal status: View real-time satellite positioning.
- USB settings: Set USB interface type (USB1.1 or USB2.0) and enable USB music autoplay.
- Detection settings: Turn off handbrake detection to watch videos while driving (default is on for safety). Turn off headlight detection to prevent screen brightness control by headlights.
5.12. Button and Gesture Learning
Button Learning:
- Floating shortcut key: Can be opened.
- Calibration study: Calibrate touch screen if touch offset occurs. (Press 5 fingers on screen for 10 seconds to enter calibration).
- Key Study: Learn and set touch screen buttons.
- Steering wheel keys learn: Set SWC buttons for factory steering wheel control.
- Panel key learning: Set physical buttons on the panel.
- Panel knob settings: Manufacturer's setting.
Gesture Learning:
- Four gestures for screen control: "slide up", "slide down", "slide left", and "slide right".
- Set gesture control for functions like "mute", "volume up", "previous song", "Navigation", etc.
- Gesture volume step value: Set to "1" for single unit adjustment, or "5" for 5-unit adjustment.
5.13. Sound Settings
- Beep sound: Turn on/off touch screen sound, choose type, and adjust volume.
- Host volume: Set default car radio volume on boot.
- Bluetooth volume: Set default Bluetooth volume.
- Navigation mixing ratio: Set volume ratio of navigation voice and background music.
- Reverse mute: Turn on/off as needed.
- BT ringtone volume: Adjust Bluetooth ringtone volume.
- MIC gain: Adjust microphone volume during Bluetooth calls.
5.14. Reverse and AUX Settings
Reverse Setting:
- Reverse radar: Displays radar information when reversing (requires Canbus support).
- Guide line: Displays guide lines when reversing (requires Canbus support). Two trajectory line styles available.
- Reversing camera system: Select "Normal N system" for original camera; aftermarket cameras require different standards.
- Mirror: Turn on/off mirror option based on camera installation.
- Backup camera power supply: Set to "often power on" or "power on when reversing".
AUX Setting:
- Right view and AUX: Turn on right camera switch and floating button to activate right-view camera. Select "CVBS N" for original camera; aftermarket cameras require different standards.
- Live navigation: For AR camera system, select "Normal N system".
5.15. Colorful Lights Setting
- Button light control: Set to "normally off", "always on", or "auto".
- Colorful lights support: Enable colorful lights after turning on.
- Colorful light mode: Choose "manual" (set one of seven colors or adjust R, G, B values) or "auto" (button light changes color automatically).
- Change "Magic Mode Speed" to adjust the changing time of colorful lights.
5.16. System Settings
- Screen brightness: Adjust day and night mode brightness separately.
- Theme set: Set to "Light", "Dark", "Time Control", or "small light control".
- Theme: Choose UI1 or UI2.
- Language and input method: Change system language.
- Date and time: Auto sync with network/GPS or manual setting.
- Time format: Set 12-hour or 24-hour format.
- System recovery: Restore to factory settings.
- Restoring defaults: Factory setting.
5.17. Radio Settings
- Radio zone setting: Set according to your country/region for proper radio reception.
- Radio antenna switch: Supplies +12V voltage to antenna outputs when on.
- Radio RDS: Receives information from local radio stations when on.
- Radio auto turns on power: Supplies voltage to antenna when entering radio function, turns off when exiting.
- Radio antenna socket power: Turn on for cars that supply power via antenna socket.
5.18. Mobile Internet Operation
Wireless Connection for iPhone & Android Phone (Z Link):
- Connect your mobile phone with the car radio via Bluetooth.
- Open the "Z Link" app. For iPhones, select "CARPLAY"; for Android phones, select "ANDROID AUTO".
- For iPhone, click "Use CarPlay" in the prompt or open "Use CarPlay" in Bluetooth settings.
- For Android phones, click confirm in the prompt.
Wired Connection for iPhone & Android Phone:
- Connect your phone to the USB OTG port via the original data cable.
- Open the "Z Link" app. Choose connection method (CarPlay/Android AUTO/HUAWEI HiCar/MIRROR).
- For iPhone, click "allow" in the prompt.
- For Android phones, click confirm in the prompt.
Mirror Wireless Screen Connection:
- Connect your phone and machine to the same WiFi device, or connect the machine to the mobile hotspot.
- Click the interface, select "MIRROR" to enter the wireless screen projection interface.
- Open the mobile phone control center, select Screen Mirroring, and then select the car device name to start screen mirroring.
CARPLAY Play Video (iOS 18+ only):
- Connect iPhone to wireless CarPlay.
- Click Kolos to enter video playback interface.
- Download Kolos app on mobile phone.
- Turn on phone mirroring and connect to device starting with "zLink-***".
- Open app and click [video stream].
- Screen projection successful.
- Select video to play on mobile phone.
5.19. Other Features

Figure 5.2: Other Key Features
- Fast Boot: Quick startup time.
- GPS Navigation: Built-in GPS for accurate navigation.
- AM/FM Radio: Access to local radio stations.
- Hands-free Call: Bluetooth for safe calling.
- Picture-in-Picture: Display multiple applications simultaneously.
- 3 USB ports: Multiple connectivity options.
- Micro SD Card Slot: Expandable storage.
- 4G SIM Card Slot: For mobile network connectivity.
5.20. Split-screen Multitasking
The unit supports split-screen functionality, allowing you to run two applications side-by-side.

Figure 5.3: Split-screen Multitasking Instructions
- Tap the recent apps icon.
- Find the app you want to run the split-screen function, click the app icon to bring up the split-screen button, and tap it.
- The first app you have selected will display on the left side, then choose the second app in recent apps.
5.21. Steering Wheel Control
The unit supports steering wheel control, making it easy to switch songs, radio channels, and adjust volume for a safer and more enjoyable journey. (Note: If your car has a CAN system, you may need to purchase an extra Canbus cable to enable this feature).

Figure 5.4: Steering Wheel Control Interface
5.22. Personalized Settings
Customize your car stereo experience with various personalized settings.

Figure 5.5: Personalized Settings Options
- Changeable Button Color: Customize the color of the physical buttons.
- Car Boot Logo: Set a custom logo to display when the unit starts up.
- Customizable Wallpapers: Choose from various wallpapers or import your own.
- Adjustable Screen Brightness: Adjust screen brightness for optimal viewing.
5.23. Cooling System
The unit features a dual heat sink design for superior heat dissipation and improved temperature control. The fan control system allows you to set warning values for CPU temperature or radio volume, triggering the fan automatically to prevent overheating.

Figure 5.6: Cooling System Features
5.24. WiFi Signal
An independent WiFi antenna ensures stable signal quality and provides fast and smooth internet access, supporting 802.11a/b/g/n/AC standards across 2.4GHz/5GHz spectral bands.

Figure 5.7: WiFi Antenna Details
5.25. Product Demonstration Video
Video 5.1: Demonstration of JOYING 9" Single Din Car Radio features, including Bluetooth, music, volume, sound effects, wireless CarPlay, radio, video, split-screen, and cooling system.
6. Maintenance
- Keep the screen clean and free from moisture, dust, steam, and oily smoke.
- Avoid prolonged exposure of the screen to direct sunlight.
- Protect the stereo from heavy pressure and impact.
- Do not connect other power sources to the car radio.
- Clean the screen with a soft and clean cloth if it becomes stained.
7. Troubleshooting (Common Problems)
7.1. Head Unit Not Turning On / Black Screen
- After installation, if the display is black, click the reset button to restart the device.
- If the screen is black or has no light after some time, check for any sound (touch screen prompt, music playback). Open the radio cover (under guidance) and check for a red flashing light on the core board.
7.2. Poor FM Radio Reception
- Check if the OEM Car radio antenna needs power. If so, connect the ANT-CONT Cable.
- Go to Factory Settings and switch on the "Antenna Always on" option.
7.3. No Sound or Some Speakers Without Sound
- Car with OEM Amplifier: Connect the AMP-CONT Cable and turn on "AMP ON/OFF" in Sound Setting.
- Car without OEM Amplifier: Check if power cables (especially speaker cable) are well connected. Try re-plugging cables.
7.4. Reversing Camera Not Working
- Head unit switches to reverse mode but no signal/black screen: Check if the trigger wire and power supply cable are connected fine. Verify the backup camera is in good condition by connecting it to the "Video In" port and opening the AUX APP to check the image.
- Head unit cannot switch to reverse mode:
- Car without Canbus: Check if the Back Cable is connected. Connect the Back Cable to the red ACC Cable to test.
- Car with Canbus: If the Back Cable is controlled by a Canbus adapter, remove the Back Cable and connect it to the Red ACC Cable.
7.5. GPS Not Working / Without Signal
- Check if the GPS antenna is connected correctly or securely.
- Ensure the GPS antenna receiver is in a correct and reasonable position (facing the sky, no metal shielding).
7.6. Bluetooth Connection Issues
- The radio only supports connecting Bluetooth with Phone and OBD2.
- If connection fails, switch off Bluetooth on your phone and head unit, then switch on after a few seconds and search again.
- Pay attention to reminder pop-ups on your phone and click "Yes".
7.7. Poor Audio During Bluetooth Phone Calls
- If using an external microphone, check if it's connected properly. Re-plug the microphone.
- Record voice with a recording APP and listen to verify microphone functionality.
7.8. Bluetooth Music Playing Without Sound
- Check if your phone's volume is at a normal level and turn it up.
- Check if your phone's Bluetooth is switched on for audio permissions.
7.9. Contacts Not Displaying / Partially Displaying
- Check if "Sync contacts" option is turned on in your phone's Bluetooth settings.
- Contacts must be saved on the phone, not the SIM Card, for syncing.
7.10. Bluetooth Name Change Failed
If the Bluetooth name is not updated, turn off Bluetooth, then turn it on again, and search for the device.
7.11. SD Card or USB Music Files Not Updating
After inserting an SD Card or USB, go to the music app to detect and scan for new files. If data is large, it may take time to update. If no update, ensure the card/USB is inserted correctly and files are valid (check via Filemanager app). Reinsert the card/USB device if needed.
7.12. No Sound or Low Sound
Adjust the volume in the Volume Balance settings to a middle level.
7.13. USB Not Recognized or Abnormal Reading
- Try different brands and storage USB disks.
- Troubleshoot the USB stick on a computer, then format it after backing up.
7.14. Unable to Connect to CarPlay / Android Auto
- Wired CarPlay/Android Auto: Use the OEM USB Cable to connect to the radio OTG USB port. Third-party cables may not be supported. For iPhone, click "Trust" if prompted. For Samsung phones, use the OEB USB Cable.
- Wireless CarPlay/Android Auto: Restart your phone and try again.
7.15. WiFi Cannot Connect Automatically to Phone's Hotspot
If using an iPhone, you must enter the "Personal hotspot" page on your phone for the head unit to search for the hotspot.
7.16. Touch Screen Not Working (Freezes / No Reaction)
- Reset the head unit.
- Try connecting a USB Mouse to the radio. If the mouse works, the touch screen is broken; if not, the core board is defective.
7.17. SIM Cards Not Recognized
- Make sure to insert the micro SIM Card correctly.
- After inserting, click the reset button to reset the radio.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | JOYING |
| Processor Type | Qualcomm Snapdragon |
| Operating System | Android 13 |
| RAM | 4G/8G |
| ROM | 128G |
| Max External Memory | 128G |
| Display Size | 9"/10.1" |
| Resolution | 1280*800 |
| Is Touch Screen | Yes |
| Built-in Screen | Yes |
| Din Type | One Din |
| Out Power | 4*50w |
| Voltage | 12 V |
| Item Weight | 4kg |
| Item Size | 9inch/10inch |
| Material | Metal+plastic |
| Interface | USB/RCA/coaxial out/optical out |
| Special Features | Built-In Speaker/Microphone, Support 3G/4G Network, WiFi Function, Steering Wheel Control, Can-Bus Support, Built-in GPS, MP3 players, Mobile Phone, Charger |
| Digital Media Format | JPEG, WMA, Mp3, MP4 |
| OSD Language | Multi-language support (THAI, Greek, Arabic, Spanish, Japanese, English, etc.) |
| TF/Micro SD Slot | 1 |
| Built-in DVD Player | No |
| Built-in CD player | No |
| FCC ID | 2BCOLJY-UZS11N8 |
9. User Tips
- Vehicle Compatibility: While this unit is universal, it's recommended to verify compatibility with your specific car model (e.g., 2005 Toyota Land Cruiser 120, 2020 Skoda Karoq) before installation, especially regarding mounting and wiring.
- Canbus System: If your vehicle has a CAN system, an additional Canbus cable might be required to enable certain features like steering wheel control or reverse radar.
- USB Cable Quality: For wired CarPlay/Android Auto, always use the original data cable provided or a high-quality OEM USB cable to ensure stable connection and functionality.
- Microphone Check: If others cannot hear you clearly during Bluetooth calls, ensure your external microphone is properly connected and functioning by testing it with a recording app.
10. Warranty and Support
10.1. Warranty Information
This product comes with a 2-year manufacturer's warranty. The warranty does not cover damage resulting from improper installation, accidents, misuse, abuse, improper wiring, or incorrect voltage operation against the instructions in this manual.
10.2. Technical Support
For any technical issues, repair inquiries, or questions regarding specific car model compatibility or dynamic logo upgrades, please contact the seller directly for assistance.