1. Product Overview
The FUZRR ES9080 is a safe and reliable non-contact high-voltage electroscope designed for detecting the presence of AC high and low voltage. It features sound and light prompts, a self-check function, and compatibility with most insulating rods. This instrument is built with an IP65 protection grade and a shock-proof structure, making it suitable for various demanding working environments.
It is ideal for non-contact detection of live voltage, cable fault finding, inspection of live high-voltage cables, tracking live wires, inspecting high-frequency radiation, and detecting residual or induced voltage.

Key Features:
- Non-contact voltage detection
- Wide voltage range: 380V to 550kV
- Acousto-optic (sound and light) prompt for voltage detection
- IP65 protection for dust and water resistance
- Shockproof structure for durability
- Self-check function
- Compatible with insulating rods (optional)
2. Setup
2.1 Unpacking and Inspection
Carefully unpack the ES9080 detector and all accessories. Verify that all components listed in the packing list are present and undamaged. If any items are missing or damaged, contact your supplier immediately.
2.2 Battery Installation
The ES9080 requires one 9V (6F22) battery for operation. The battery is typically not included due to international shipping safety regulations.
- Locate the battery cover on the back of the instrument.
- Use a suitable tool (e.g., a screwdriver) to open the battery cover.
- Insert a new 9V (6F22) battery, ensuring correct polarity.
- Close the battery cover securely.

2.3 Attaching the Insulating Rod (Optional)
If using the optional insulating rod (4 sections of 3.5 meters), attach it to the insulating rod joint on the detector. Ensure the connection is firm and secure before use.

3. Operating Instructions
3.1 Power On/Off and Self-Check
- Turn the 'Light switch' to the 'ON' position.
- The detector will perform a self-check, indicated by a brief sound and flash of the LED indicators.
- Ensure the 'Low battery indicator' is not illuminated. If it is, replace the battery.
3.2 Selecting Voltage Range
The ES9080 has 8 voltage detection levels. Rotate the 'Range switch' to select the appropriate voltage range for your application. Always start with a higher range if the voltage is unknown and gradually decrease if necessary, ensuring safety.
3.3 Voltage Detection
- Ensure the detector is powered on and the correct voltage range is selected.
- Approach the object to be tested with the detector. Maintain a safe distance, as this is a non-contact device.
- When live voltage is detected, the instrument will issue a sound prompt (from the buzzer) and the LED indicators will flash. The intensity of the sound and light may vary with the proximity and strength of the electric field.
- If no prompt is issued, it indicates the absence of voltage within the selected range, or the voltage is below the detection threshold.
3.4 Applications
The ES9080 is versatile and can be used for:
- Voltage Detection: Confirming the presence or absence of AC voltage in electrical systems.
- Cable Tracing: Identifying live cables within a system.
- Checking Grounding Devices: Verifying proper grounding.
- Testing Live High Voltage Cables: Safely checking for live conditions.
- Tracking Field Wires: Following the path of energized wires.
- Inspecting High-Frequency Radiation: Detecting electromagnetic fields.
- Detecting Residual or Induced Voltage: Identifying latent electrical charges.

4. Maintenance
4.1 Battery Replacement
When the low battery indicator illuminates, replace the 9V battery promptly to ensure accurate readings and proper operation. Refer to section 2.2 for battery installation instructions.
4.2 Cleaning
The ES9080 has an IP65 rating, indicating protection against dust and low-pressure water jets. To clean the instrument, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the battery compartment is sealed before cleaning.
4.3 Storage
Store the instrument in a dry place, away from direct sunlight and extreme temperatures. The recommended storage temperature and humidity are -15℃ to +55℃ and below 90% RH, respectively. If storing for extended periods, remove the battery to prevent leakage.
5. Troubleshooting
- No Indication When Voltage is Expected:
- Check if the instrument is powered on.
- Verify the battery level; replace if the low battery indicator is on.
- Ensure the correct voltage range is selected for the expected voltage.
- Confirm the detector is within sufficient proximity to the live source.
- Intermittent or Weak Indication:
- Check battery level.
- Ensure there are no obstructions between the detector and the voltage source.
- Verify the selected voltage range is appropriate.
6. Specifications
| Feature | Description |
|---|---|
| Features | Voltage detection, cable tracing |
| Baseline conditions | 23℃±5℃, below 75%RH |
| Test voltage (V) | 380V; 6KV; 10KV; 27.5KV; 35KV; 110KV; 220KV; 500KV |
| Insulating rod | 4 sections of 3.5 meters (Not Included) |
| Power supply | DC 9V (one 6F22 battery) |
| Meter size | 115mm (L)×115mm (W)×169mm (H) |
| Sealing class | IP65 |
| Prompt function | Sound and light prompt when detected voltage exceeds the gear setting voltage |
| Instrument quality | 390g (including battery) |
| Operating temperature and humidity | -10℃~+50℃<85%RH |
| Storage temperature and humidity | -15℃~+55℃<90%RH |
| Suitable for safety regulations | EN 61326-1 CISPR 11, EN 61000-4-2 EN 61000-4-3, EN 61000-4-8 |
7. Packing List
7.1 ES9080 with Rod
- Instrument: 1 set
- 9V battery: 1 section (Not Included due to international shipping safety)
- Color box: 1
- Manual, Warranty: 1 set
- Insulating Rod: 1 set

7.2 ES9080 Main Device Only
- Instrument: 1 set
- 9V battery: 1 section (Not Included due to international shipping safety)
- Color box: 1
- Manual, Warranty: 1 set

8. Warranty and Support
This product comes with a manual and warranty information included in the packaging. Please refer to these documents for specific warranty terms and conditions. For technical support or service inquiries, please contact your point of purchase or the manufacturer directly.
9. User Tips
- Always Test First: Before using the detector on an unknown circuit, always test it on a known live source to confirm it is functioning correctly.
- Select Appropriate Range: Incorrect range selection can lead to inaccurate readings or missed detections. Always choose a range that encompasses the expected voltage.
- Maintain Safe Distance: While the device is non-contact, always adhere to safety protocols for working near high voltage and maintain a safe distance.
- Environmental Conditions: Be aware of the operating temperature and humidity limits to ensure optimal performance and longevity of the device.