1. Product Overview
The JONSBO CR-1000 V2 PRO ARGB CPU Cooler is a high-performance single-tower air cooler designed to efficiently dissipate heat from your CPU. It features a sophisticated design with a dual-zone trapezoidal illusion mirror top cover, enhanced by a carbon fiber sun pattern texture, creating a unique three-dimensional light effect. The cooler incorporates six nickel-plated copper heat pipes to maximize heat conduction and cooling efficiency. Its design also prioritizes memory compatibility, featuring a 'crooked neck' heatpipe structure to avoid interference with RAM modules.



2. Specifications
| Feature | Detail |
|---|---|
| Model Number | JONSBO CR-1000 V2 PRO ARGB CPU Cooler |
| Cooler Type | Tower |
| Heatpipes | 6 (Nickel-plated anti-oxidation) |
| Supported CPU Sockets | Intel: LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA1200, LGA 1700 AMD: AM4, AM5 |
| TDP | 230W |
| Heatsink Dimensions | 120mm x 71mm x 154mm (L x W x H) |
| Fan Size | 120mm x 120mm x 25mm |
| Fan Rotation Speed | 600 - 1500 RPM (±10%) |
| Fan Air Volume | 28.12 - 59.48 CFM |
| Fan Air Pressure | 0.26 - 1.81 mmH2O |
| Fan Noise Level | 22 - 32 dB(A) (MAX) |
| Power Interface | Fan: 4-pin PWM LED: 3-pin ARGB |
| Blade Quantity | 9 |
| Lifetime | ≥40000h @25°C |
| Operating Current (LED) | 0.46A (MAX) |
| Working Voltage (Fan/LED) | Fan: 12V LED: 5V |
| Power Consumption (Fan/LED) | Fan: 1.92W (MAX) LED: 2.3W (MAX) |


3. Package Contents
Please check the package contents upon unboxing to ensure all components are present and undamaged:
- JONSBO CR-1000 V2 PRO ARGB CPU Cooler Unit (Heatsink and Fan)
- Mounting Brackets for Intel LGA 1700/1200/115X Sockets
- Mounting Brackets for AMD AM4/AM5 Sockets
- Set of Screws and Fasteners
- Thermal Paste
- User Manual (this document)

4. Installation Guide
Before starting, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket and mounting area details.
4.1 Prepare the CPU and Motherboard
- Install your CPU into the motherboard socket.
- Clean the CPU surface thoroughly with isopropyl alcohol to remove any dust or old thermal paste.
- Identify the correct mounting brackets for your CPU socket (Intel LGA or AMD AM).
4.2 Install Mounting Hardware
- For Intel sockets, attach the appropriate backplate to the rear of the motherboard, aligning the holes.
- Secure the standoffs/screws through the motherboard from the front, using the correct mounting holes for your socket type.
- Place the metal fastener strips onto the standoffs/screws.
4.3 Apply Thermal Paste
- Apply a small, pea-sized amount of thermal paste to the center of your CPU's integrated heat spreader (IHS).
- Do not spread the paste; the pressure from the cooler will distribute it evenly.
4.4 Mount the CPU Cooler
- Carefully place the JONSBO CR-1000 V2 PRO heatsink onto the CPU, aligning the mounting holes on the cooler's base with the mounting strips/screws.
- Secure the cooler using the provided screws, tightening them in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.
- The cooler is designed for convenient installation without needing to remove the fan, and its 'crooked neck' heatpipe design ensures clearance for memory modules.

4.5 Connect Cables
- Connect the 4-pin PWM fan cable from the cooler to the 'CPU_FAN' header on your motherboard.
- Connect the 3-pin ARGB cable from the cooler to a compatible 5V ARGB header on your motherboard. Ensure it is a 5V ARGB header and not a 12V RGB header to prevent damage.
5. Operation
5.1 Fan Control
The cooler's fan uses a 4-pin PWM connector, allowing your motherboard to automatically control its speed based on CPU temperature. This ensures optimal cooling performance while minimizing noise. You can typically adjust fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.
5.2 ARGB Lighting Control
The JONSBO CR-1000 V2 PRO features Addressable RGB (ARGB) lighting on its fan and top cover. To control the lighting effects, connect the 3-pin ARGB cable to a compatible 5V ARGB header on your motherboard. You can then use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to synchronize and customize the lighting effects.

6. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your CPU cooler.
- Dust Removal: Periodically (e.g., every 3-6 months), use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan is held stationary while cleaning to prevent damage to the bearings.
- Fan Cleaning: If dust buildup is significant, carefully remove the fan (if detachable) and clean the blades with a soft brush or cloth.
- Thermal Paste: The thermal paste typically lasts for several years. If you notice a significant increase in CPU temperatures, consider reapplying fresh thermal paste. This usually involves carefully removing the cooler, cleaning off old paste from both the CPU and cooler base, and applying new paste.
7. Troubleshooting
7.1 Fan Not Spinning
- Check Connection: Ensure the 4-pin PWM fan cable is securely connected to the 'CPU_FAN' header on your motherboard.
- BIOS Settings: Verify that the CPU fan header is enabled in your motherboard's BIOS/UEFI settings and that the fan speed control is not set to '0 RPM' or a very low threshold.
- Obstruction: Check for any physical obstructions preventing the fan blades from spinning.
7.2 ARGB Lighting Not Working
- Check Connection: Ensure the 3-pin ARGB cable is securely connected to a 5V ARGB header on your motherboard. Confirm it's not connected to a 12V RGB header, which can damage the LEDs.
- Software/BIOS: Use your motherboard's RGB control software or BIOS settings to enable and configure the ARGB lighting.
- Power: Ensure the system is receiving adequate power.
7.3 High CPU Temperatures
- Thermal Paste: Ensure thermal paste was applied correctly and evenly. Reapply if necessary.
- Mounting Pressure: Verify that the cooler is securely mounted to the CPU with adequate and even pressure. Check that all screws are tightened in a diagonal pattern.
- Airflow: Ensure proper airflow within your PC case. Check that case fans are correctly oriented to provide fresh air to the cooler and exhaust hot air.
- Dust Buildup: Clean any dust from the heatsink fins and fan blades as described in the Maintenance section.
8. User Tips
- Cable Management: Route the fan and ARGB cables neatly to avoid interfering with other components or airflow.
- BIOS Updates: Keep your motherboard's BIOS/UEFI updated, as this can sometimes improve fan control and compatibility.
- Software Control: Utilize your motherboard's dedicated software for ARGB lighting and fan speed control to customize your experience.
- Pre-installation Check: Before installing the cooler, double-check that all mounting hardware for your specific CPU socket is present and accounted for.
9. Warranty and Support
The JONSBO CR-1000 V2 PRO ARGB CPU Cooler comes with a 3-year product warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use conditions.
For technical support, warranty claims, or further assistance, please contact your retailer or the official JONSBO support channels. Keep your proof of purchase for warranty validation.