lilygo Meshtastic T-Beam-S3

Contents

LILYGO® Meshtastic T-Beam SUPREME ESP32-S3 Development Board User Manual

Model: Meshtastic T-Beam-S3

1. Introduction

The LILYGO® Meshtastic T-Beam SUPREME is a collaborative development board designed for advanced wireless communication and IoT projects. It integrates an ESP32-S3 microcontroller, a LoRa SX1262 module for long-range communication, and a GPS module (available with U-blox MAX-M10S-00B or L76K chip options). This board also features Wi-Fi, Bluetooth, and a 1.3-inch OLED display, making it a versatile tool for developers and hobbyists.

This manual provides essential information for setting up, operating, and maintaining your T-Beam SUPREME development board. Please read it carefully before use.

Front and back view of the LILYGO T-Beam SUPREME board, showing the OLED display and 18650 battery holder.

Figure 1: LILYGO T-Beam SUPREME Development Board (Front and Back)

2. Safety Information

Please observe the following safety precautions to prevent damage to the device or injury to yourself:

  • Handle the board with care to avoid electrostatic discharge (ESD) damage.
  • Ensure correct polarity when installing the 18650 battery. Incorrect installation can damage the board.
  • Do not expose the device to moisture, extreme temperatures, or direct sunlight.
  • Only use the specified power supply (Type-C USB or 18650 battery).
  • When connecting antennas, ensure they are securely fastened to prevent signal loss or damage to the LoRa/GPS modules.
  • This product is intended for verification test experiments as a development board module. Please ensure compliance with local wireless management regulations and select a frequency that meets local laws and regulations.

3. What's in the Box?

Upon opening your package, you should find the following items:

  • 1 x T-Beam SUPREME Development Board
  • 1 x LoRa Antenna
Contents of the T-Beam SUPREME package, showing the development board and a LoRa antenna.

Figure 2: Package Contents

4. Product Overview

The T-Beam SUPREME is built around a modular design, allowing for flexibility in its GPS component. The core module integrates the ESP32-S3, LoRa SX1262, and an optional GPS chip.

Key Features:

  • MCU: ESP32-S3FN8 Dual-core LX7 microprocessor
  • Wireless Connectivity: 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
  • Development Environment: Supports Arduino, PlatformIO-IDE, Micropython
  • Onboard Functions: Boot (I000), Reset, Power Button
  • Memory: 8MB Flash, 8MB PSRAM
  • IMU: Six-axis IMU QMI8658
  • Display: 1.3 inch SH1106 OLED (128 x 64 resolution, I2C interface, SDA: I012, SCL: I013)
  • LoRa Module: SX1262 (Low power consumption, LoRa receiving & sending, available in 433/868/915 MHz options)
  • GPS Options: U-blox MAX-M10S-00B or L76K
Detailed specifications of the T-Beam SUPREME V3, including MCU, wireless connectivity, memory, IMU, OLED, LoRa module, and GPS version comparison.

Figure 3: T-Beam SUPREME V3 Specifications

Close-up view of the T-Beam-S3Core, showing WiFi and LoRa modules, and the two optional T-BeamCORE modules (U-blox MAX-M10S-00B and L76K) with antenna connection points.

Figure 4: T-Beam-S3Core with Optional GPS Modules

5. Specifications

Feature Description
Model Number Meshtastic T-Beam-S3
Dimensions (WxHxD) 114.6 x 28 x 33 mm
Weight 100g
Chipset ESP32-S3
Wireless Type Bluetooth, Wi-Fi, LoRa SX1262
LoRa Frequency Options 433MHz, 868MHz, 915MHz
GPS Module Options L76K or U-blox MAX-M10S-00B
OLED Display 1.3 inch SH1106, 128x64 resolution
Battery Support 18650 (standard length, flat head, without protection board recommended)
Compatible Equipment Style Professional Audio Equipment, Display Equipment
High-concerned chemical None
Dimensions of the T-Beam SUPREME: Length 114.6mm, Height 28mm, Width 33mm.

Figure 5: Product Dimensions

GPS Module Comparison:

Comparison table for L76K GNSS vs Ublox MAX-M10S-00B GNSS, detailing properties, positioning support, GNSS parallelism, update rate, and oscillator.

Figure 6: GPS Module Comparison

6. Setup Guide

6.1. Battery Installation

  1. Locate the 18650 battery holder on the back of the T-Beam SUPREME board.
  2. Insert a standard length 18650 battery (flat head, without protection board recommended) into the holder, ensuring correct polarity. The positive (+) and negative (-) terminals are marked on the holder.
Angled view of the T-Beam SUPREME board, highlighting the 18650 battery holder and GPS module.

Figure 7: 18650 Battery Holder

Diagram showing recommended 18650 battery dimensions (18mm*65mm) and advising use of standard length 18650 battery without protection board for good power supply.

Figure 8: Recommended 18650 Battery Type

6.2. Antenna Connection

Connect the provided LoRa antenna to the SMA connector labeled 'LoRa' on the board. If your model includes an external GPS antenna, connect it to the 'GPS' connector.

Hand holding the T-Beam SUPREME with an antenna attached, showing its compact size and OLED display.

Figure 9: T-Beam SUPREME with Antenna

6.3. Powering On/Off

The board can be powered via the Type-C USB port or the installed 18650 battery. Use the onboard power button to turn the device on or off.

6.4. Connecting to a Computer

Connect the T-Beam SUPREME to your computer using a Type-C USB cable. This connection is used for programming, serial communication, and charging the 18650 battery.

7. Operating Instructions

The LILYGO T-Beam SUPREME is a development board, meaning its functionality is primarily defined by the firmware you upload to it. It is designed to be compatible with the Meshtastic firmware, enabling off-grid communication.

7.1. Firmware Upload

To get started, you will need to upload firmware to the ESP32-S3. This typically involves:

  1. Installing the necessary development environment (e.g., Arduino IDE, PlatformIO).
  2. Downloading the Meshtastic firmware or LILYGO LoRa series examples from their respective GitHub repositories.
  3. Connecting the board via USB and selecting the correct board and port in your IDE.
  4. Compiling and uploading the firmware.

For detailed instructions on firmware installation and usage, please refer to the official Meshtastic and LILYGO LoRa series GitHub pages:

7.2. Basic Functionality

  • OLED Display: The 1.3-inch OLED screen will display information as programmed by the firmware, such as network status, GPS coordinates, or messages.
  • LoRa Communication: The SX1262 module enables long-range, low-power wireless communication, ideal for mesh networking applications like Meshtastic.
  • GPS: The integrated GPS module provides location data, which can be used for tracking, navigation, or time synchronization.
  • Wi-Fi & Bluetooth: The ESP32-S3's Wi-Fi and Bluetooth capabilities allow for local network connectivity, configuration via a web interface, or communication with other Bluetooth-enabled devices.

8. Product Pin Diagram

Understanding the pinout is crucial for advanced development and connecting external components.

Detailed pinout diagram for LILYGO SoftRF T-BEAM-S3 SUPREME, showing TF Card, OLED, LoRa, IMU, RTC, and PMU pin assignments, along with power inputs and the U-blox MAX-M10S-00B and L76K core versions.

Figure 10: LILYGO SoftRF T-BEAM-S3 SUPREME Pinout

LILYGO T-BEAM-S3Core PINMAP, illustrating the front view with M Key, M.2 6PIN x 2, Blue LED, Type-C USB, WiFi, LoRa, GPS pins, and back views of Ublox MAX-M10S-00B and L76K versions.

Figure 11: LILYGO T-BEAM-S3Core PINMAP

9. Maintenance

  • Keep the board clean and free from dust and debris. Use a soft, dry brush or compressed air for cleaning.
  • Avoid touching the electronic components directly, especially when the board is powered on.
  • Store the board in an anti-static bag when not in use to prevent ESD damage.
  • Regularly check for firmware updates from the official Meshtastic or LILYGO GitHub repositories to ensure optimal performance and access to new features.

10. Troubleshooting

10.1. Board Not Powering On

  • Check the 18650 battery: Ensure it is charged and inserted with correct polarity.
  • USB Connection: Verify the Type-C USB cable is securely connected to both the board and a working USB port on your computer or power adapter.
  • Power Button: Ensure the power button is pressed correctly.

10.2. Firmware Upload Failure

  • Driver Installation: Make sure you have installed the necessary USB-to-serial drivers for your operating system.
  • Correct Port: Verify that the correct serial port is selected in your development environment.
  • Board Selection: Ensure the correct ESP32-S3 board definition is selected in your IDE.
  • Cable Quality: Try a different Type-C USB cable, as some cables are for charging only and do not support data transfer.

10.3. No LoRa/GPS Signal

  • Antenna Connection: Confirm that the LoRa and GPS antennas are securely connected to their respective ports.
  • Environment: Ensure you are in an open area for GPS signal acquisition. LoRa range can be affected by obstacles and interference.
  • Firmware Configuration: Check your firmware settings for correct LoRa frequency and GPS module configuration.

11. User Tips

  • Enclosures: Many users look for protective housings for their T-Beam SUPREME boards. While not included, consider searching for 3D-printable designs or third-party enclosures specifically made for this model to protect it during field use.
  • Community Support: The Meshtastic community is very active. Utilize their forums and documentation for advanced configurations, project ideas, and troubleshooting.
  • Power Management: For extended use, optimize your firmware for low-power consumption, especially when running on battery.

12. Warranty and Support

For warranty information and technical support, please refer to the official LILYGO website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

For community-driven support and resources related to the Meshtastic firmware, visit the official Meshtastic project website and forums.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.