1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your PRELINGCAR 12.3-inch LCD Digital Dashboard. This virtual cockpit instrument cluster is designed to upgrade your BMW F-Series vehicle with advanced digital display features, including Carplay, Android Auto, and a Head-Up Display (HUD) system.
1.1 Product Overview
The PRELINGCAR 12.3-inch Digital Dashboard offers a high-resolution 1920*720 display, replacing your original instrument cluster. It features a Linux operating system, supports steering wheel controls, and integrates seamlessly with your vehicle's original information display. The unit is designed for plug-and-play installation, providing a modern and personalized driving experience.
1.2 Compatibility
This digital dashboard is compatible with various BMW F-Series models. Please verify your vehicle's specific model and year before installation:
- BMW 5 Series F10/F11/F18 (2010-2017) with CIC, NBT system
- BMW 6 Series F06/F12/F13 (2011-2017) with CIC, NBT system
- BMW 7 Series F01/F02/F03 (2009-2015) with CIC, NBT system
- BMW X3-F25/X4-F26 (2011-2017) with CIC, NBT system
- BMW X5-F15/X6-F16 (2014-2018) with NBT, EVO system
Note: This screen can only be fitted to original models with a Head-Up Display (HUD) if you choose the 'with HUD' variant.

Figure 1.1: PRELINGCAR 12.3-inch Digital Dashboard
2. Setup and Installation
The digital dashboard is designed for plug-and-play installation. Professional installation is recommended.
2.1 Installation Video Reference
For a visual guide on the installation process for F10 models, please refer to the following video: BMW F10 Digital Cluster Installation Video
2.2 Software Update (Start Logo & Car Model File)
To update the car start logo and car model file:
- Check the system version after installing the device.
- Download the update file from: Google Drive Link.
- Ensure the downloaded file is named "dashboard.zip". Do not unzip it and no password is required.
- Format a USB disk and copy the "dashboard.zip" file to it.
- Connect the USB disk to the USB port on the digital cluster.
- Perform the update when the device is powered on. The update process is direct and typically takes 2-5 seconds.
- After the update is complete, remove the USB disk.

Figure 2.1: System Version Information

Figure 2.2: USB Disk with Update File
After the update, you will see the BMW start logo. You can then choose your specific car model in the vehicle model settings.
3. Operating Instructions
The digital dashboard offers a variety of customizable settings and display options.
3.1 User Interface (UI) Themes and Customization
The dashboard supports multiple UI themes and color selections to personalize your display.

Figure 3.1: UI Themes and Color Options
You can choose from Classic, Track, Comfortable, and Sport themes, and select from 3 colors for the UI interface.
3.2 System Settings Navigation
Access system settings by navigating through the menus using the BC key on your steering wheel.
Video 3.1: Digital Dashboard UI Demonstration and Settings Navigation
3.3 Fuel Tank Capacity Setting (F10 Specific)
To set the fuel tank capacity:
- Fill the car's fuel tank completely.
- Start the engine.
- Press and hold the button in the lower left corner of the original car instrument. Select "10 Unlock" from the main menu.
- Add the last 5 digits of your vehicle's frame number (e.g., if the last 5 digits are 51906, calculate 5+1+9+0+6 = 21). Enter this sum (e.g., 21) into the CODE position in the "Unlock" menu, then press the button to exit.
- Select "13 Tank" from the main menu.
- Round the left tank value (e.g., 36.5L to 37L) and enter it into the main fuel tank setting of the instrument.
- Enter the right tank value (e.g., 30L) into the auxiliary fuel tank setting.

Figure 3.2: Fuel Tank Capacity Setting Interface
3.4 Oil Tank Capacity Function (F10 Specific)
To set the oil tank capacity function:
- Go to System Settings → Factory Settings.
- Enter Password "0168".
- Set the corresponding function using the BC key.
- Click the "Save" button to save your changes.

Figure 3.3: Oil Tank Capacity Setting Interface
3.5 Cruise Control Setting (F10 Specific)
To set cruise control:
- Using the BC key, navigate to System Settings → Protocol Upgrade.
- Enter Password "4321".
- Select the corresponding cruise control function from the options provided.
Important: After selecting a cruise function, turn off the engine and lock the car for 10 minutes before trying other cruise functions.

Figure 3.4: Cruise Control Setting Interface
3.6 Car Manual/Automatic 'P' Display Setting
To set the 'P' display for manual or automatic cars:
- Go to System Settings → Upgrade.
- Enter the code "0181" and press OK.
- If it's an automatic car, press the button once to display 'P'. If it's a manual car, press it again to display without 'P'.
3.7 Other Settings
The product is generally plug-and-play, and most settings do not require special configuration. However, you can customize the following:
- Short Mileage Zeroing: Itinerary > Mileage > Short Mileage A/B > Long press BC button to reset to zero.
- Maintenance Information: Vehicle Settings > Maintenance Information > Press BC button to customize maintenance cycle.
- Backlight Brightness: System Settings > General Settings > Backlight Brightness Settings > Long press BC button to adjust.
- Vehicle Color: System Settings > General Settings > Vehicle Color > Long press BC button to adjust.
- Background Color: System Settings > General Settings > Driving Modes > Press and hold BC button to switch colors.
- Overspeed Warning: System Settings > General Settings > Overspeed Warning Switch.
- Kilometers Setting: System Settings > Factory Settings > 0168 > Custom Change ODO Kilometers (remember to save).
- Chassis Setup: System Set > Factory Set > 0168 > Switch Chassis Type.
- Hybrid Battery: System Settings > Factory Settings > 0168 > Hybrid Battery On.
- Chassis E Model Oil Scale Display: System Settings > Factory Settings > 0168 > Oil Scale Open.
- Mileage Units: System Settings > Factory Settings > 0169 > km/mile > Long press BC button to switch.
- Time Display Hidden: System Settings > Factory Settings > 0169 > Time Display > Long press BC button to turn on.
- Time 24H System: System Settings > Factory Settings > 0169 > Time: 24H > Press and hold BC button to open.
- Outside Temperature: System Settings > Factory Settings > 0169 > Outside Temperature > Long press BC button to turn on.
- Doors Displayed Inverted: System Settings > Factory Settings > 0169 > Front/Rear Tire Replacement > Long press BC button to switch.
- Fuel Cap Orientation: System Settings > Factory Settings > 0169 > Fuel Tank Port > Long press BC button to switch.
- Model Settings: System Settings > Factory Settings > 0168 > Press and hold BC button to switch models.
- Reversing Sound: System Settings > Factory Settings > 0169 > Reversing Prompt Sound > Long press BC button to switch.
- Version Information: The system is set > Version.
- Shielding Kilometers: System Settings > Protocol Upgrade > 0180 (Enter 0180 once to turn on, enter again to block).
- Shielded Gear Display: System Settings > Protocol Upgrade > 0181 (Enter 0181 once to turn on, enter again to block).
- Tire Pressure Monitoring: System Settings > Factory Settings > 0169 > Tire Pressure Monitoring > On.
- Adaptive Cruise Display: System Settings > Factory Settings > 0169 > Adaptive Cruise > On.
- Fuel Type: System Set > Plant Set > 0169 > Fuel Type > Petrol/Diesel.
- 360 mph Setting: System Settings > Factory Settings > 0169 > Maximum Speed 360 > On.
4. Maintenance
Regular checks and proper settings ensure optimal performance of your digital dashboard.
4.1 Service Information
The dashboard can display various service-related information, including:
- Oil and oil filter status
- Front brake system status
- Rear brake system status
- Vehicle inspection reminders
You can access and reset these service intervals through the system settings.
4.2 Mileage Setting
To set the mileage (ODO) for the F10 Cluster:
- Go to System Settings > Factory Settings.
- Enter Password "0168".
- The ODO (odometer) setting is available for mileage adjustment.

Figure 4.1: Mileage Setting Interface
5. Troubleshooting
Here are solutions to common issues you might encounter:
- 'P' display issue: If the 'P' (for automatic car) is not displayed correctly after setting, go to System Settings > Upgrade, enter code '0181', and press the button again.
- Cruise Control Function not working: After changing cruise control settings, turn off the engine and lock the car for 10 minutes before testing the function again. This allows the system to properly apply the new settings.
- Airbag Icon at Startup: The manual does not explicitly state whether the airbag icon is displayed during startup. If this is a concern for vehicle inspection in your region, please contact customer support for clarification or consult local regulations.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | PRELINGCAR |
| Item Type | Digital Dashboard / Virtual Cockpit Instrument |
| Screen Size | 12.3 inch |
| Resolution | 1920*720 |
| Operating System | Linux |
| Interface | Plug to Play |
| Out Power | 4*45W |
| Voltage | 12V |
| Material Type | ABS (Plastic) |
| Item Weight | 3.5 kg |
| Item Height | 20 cm |
| Item Width | 30 cm |
| Item Length | 40 cm |
| Digital Media Format | CD |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Arabic, Russian, French, Korean, Japanese, Turkish, Spanish, Italian, English |
| Placement on Vehicle | Dashboard |
| Origin | Mainland China |
| Certification | CE |
| Steering Wheel Control | Support |
| Original Information Displaying | Support |
7. User Tips
- The digital dashboard can display speed in both kilometers per hour (km/h) and miles per hour (mph), which can be adjusted in the settings.
- Always ensure the USB disk is properly formatted before copying update files to prevent corruption.
- For cruise control settings, remember to turn off the engine and lock the car for 10 minutes after making changes to allow the system to reset and apply the new configuration.
- The operation instructions provided in this manual are for reference only. Similar steps can be applied to other compatible models.
8. Warranty and Support
8.1 User Manual (PDF)
A detailed user manual in PDF format is available for download. You can access it here: User Manual (PDF)
8.2 Technical Support
If you encounter any technical issues or have questions regarding installation or operation, please contact our engineering team for assistance.
- WhatsApp Number: +8613360093498 or +905010825798
- Email Address: candicesong1985@163.com
We offer professional engineering support for installation and troubleshooting. Your feedback is valuable to us for continuous improvement.

Figure 8.1: After-sales Contact Information