GT SONIC VGT-800

Contents

GT SONIC VGT-800 600ml Ultrasonic Cleaner User Manual

Model: VGT-800

1. Introduction

The GT SONIC VGT-800 is a 600ml ultrasonic cleaner designed for powerful, professional-grade cleaning of various small items. Utilizing 40kHz high-frequency ultrasonic waves, it creates millions of microscopic cleansing bubbles to gently lift dirt, dust, and grime from hard-to-reach areas without causing damage. Its minimalist design, durable SUS304 stainless steel tank, and one-button operation make it safe, practical, and efficient for personal or professional use.

This manual provides essential information for the safe and effective operation and maintenance of your ultrasonic cleaner.

2. Safety Information

  • Read all instructions before using the appliance.
  • Do not immerse the main unit in water or other liquids.
  • Ensure the power supply matches the unit's requirements (220V EU Plug).
  • Do not operate the cleaner without water in the tank.
  • Keep out of reach of children.
  • Unplug the unit when not in use or before cleaning.
  • Do not disassemble or attempt to repair the unit yourself. Contact qualified personnel for service.
  • Avoid touching the cleaning fluid with bare hands during operation.

3. Package Contents

Verify that all items are present in the package:

  • 1 x GT SONIC VGT-800 Ultrasonic Cleaner
  • 1 x Cleaning Basket
  • 1 x Watch Holder
  • 1 x Power Cord (220V EU Plug)
  • 1 x English Instruction Manual
Packaged contents of the VGT-800 Ultrasonic Cleaner, including the main unit, cleaning basket, watch holder, and user manual.
Figure 1: Packaged Listing

4. Product Overview

The VGT-800 Ultrasonic Cleaner features a compact design with a durable stainless steel tank and an intuitive control panel.

Diagram highlighting key features of the 600ml Ultrasonic Cleaner: No Heating Temperature, 3 min Timer, 35W Sonic Power, No Heating Power, 40 kHz High Frequency.
Figure 2: Key Features
Diagram of the VGT-800 Control Panel showing the LED display and the ON/OFF/RESET button.
Figure 3: Control Panel

Main Components:

  • SUS 304 Tank: High-strength stainless steel cleaning chamber.
  • ABS Plastic Cover: Durable and eco-friendly material.
  • Non-slip Feet: Ensures stability during operation.
  • Control Panel: Features an LED display and a single ON/OFF/RESET button for easy operation.
Close-up views of the VGT-800 showing the SUS 304 tank, non-slip feet, one-button operation, and ABS plastic cover.
Figure 4: Product Features

5. Specifications

FeatureSpecification
ModelVGT-800
Overall Size (L*W*H)200mm * 140mm * 125mm (7.87in * 5.51in * 4.92in)
Tank Size (L*W*H)155mm * 95mm * 52mm (6.10in * 3.74in * 2.05in)
Volume600ml
Power SupplyAC 220-240V, 50Hz
Ultrasonic Power35W
Ultrasonic Frequency40kHz
Tank MaterialStainless Steel SUS304
Timer3 minutes auto shut-off (180 seconds)
Net Weight (N.W.)840g
Gross Weight (G.W.)1100g
CertificationROHS, CE
Diagram showing the dimensions of the VGT-800 Ultrasonic Cleaner and a table of specifications.
Figure 5: Product Dimensions and Specifications
Product size diagram with dimensions in inches.
Figure 6: Product Size in Inches

6. Setup

  1. Placement: Place the ultrasonic cleaner on a stable, flat, and dry surface.
  2. Power Connection: Ensure the unit is unplugged before filling. Connect the power cord to the unit and then to a compatible 220V EU power outlet.
  3. Fill the Tank: Open the lid and fill the stainless steel tank with water. The water level should not be less than half of the maximum water level indicated inside the tank. For enhanced cleaning, a small amount of mild detergent can be added.
  4. Insert Items: Place the cleaning basket or watch holder into the tank. Carefully place the items to be cleaned into the basket or holder, ensuring they are fully submerged in the water but not overcrowded.
Image showing the VGT-800 Ultrasonic Cleaner with a 220V EU Plug.
Figure 7: 220V EU Plug

7. Operating Instructions

The VGT-800 features a simple one-button operation with a 3-minute automatic shut-off timer.

  1. Prepare the Cleaner: Follow the setup steps (Section 6) to fill the tank and place items inside.
  2. Start Cleaning: Press the 'ON' button on the control panel. The LED indicator will light up, and the ultrasonic cleaning process will begin.
  3. Automatic Shut-off: The cleaner will operate for 3 minutes (180 seconds) and then automatically turn off. The LED indicator will turn off.
  4. Stop Manually (Optional): To stop the cleaning cycle before 3 minutes, press the 'OFF' button.
  5. Reset: If you need to restart a cycle or clear an error, press the 'RESET' button.
  6. Remove Items: Once the cleaning cycle is complete, unplug the unit. Carefully remove the cleaning basket or watch holder with the cleaned items.
  7. Rinse and Dry: Rinse the cleaned items under clean water and dry them thoroughly with a soft cloth.
  8. Empty and Clean Tank: Empty the water from the tank and wipe it clean.
Video 1: Demonstration of ultrasonic cleaning action with aluminum foil, showing cavitation effect.

Applicable Items:

The VGT-800 is suitable for cleaning a wide range of items, including:

  • Jewelry (necklaces, rings, earrings, bracelets)
  • Eyeglasses and sunglasses
  • Watches and watch bands
  • Dental appliances (false teeth, retainers)
  • Shaver heads and razor blades
  • Small tools and metal articles
Illustrations of various items suitable for ultrasonic cleaning, including necklaces, tools, watches, shavers, glasses, and false teeth.
Figure 8: Multi-Purpose Cleaning Applications

8. Maintenance

  1. After Each Use: Unplug the unit. Empty the water from the tank. Wipe the inside of the tank and the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
  2. Storage: Store the cleaner in a cool, dry place away from direct sunlight and moisture.
  3. Avoid Harsh Chemicals: Do not use strong acids, alkalis, or corrosive cleaning solutions in the tank, as this may damage the stainless steel.

9. Troubleshooting

  • Unit does not turn on:
    • Check if the power cord is securely plugged into both the unit and the power outlet.
    • Ensure the power outlet is functional.
  • No ultrasonic action (no bubbles/sound):
    • Ensure the tank is filled with water above the minimum level.
    • Press the 'ON' button firmly.
    • If the unit has been running, allow it to cool down before restarting.
  • Poor cleaning results:
    • Ensure items are fully submerged.
    • Do not overcrowd the tank.
    • Consider adding a small amount of mild, non-foaming detergent suitable for ultrasonic cleaners.
    • For heavily soiled items, multiple cleaning cycles may be necessary.

10. User Tips

  • Water Level: Always ensure the water level is sufficient to cover the items and is above the minimum fill line to prevent damage to the unit.
  • Cleaning Solution: While plain water is often effective, adding a drop of dish soap or a specialized ultrasonic cleaning solution can improve results for stubborn dirt or grease.
  • Scratch Removal: Please note that ultrasonic cleaners are designed to remove dirt, grime, and contaminants. They cannot remove scratches from surfaces.
  • Noise Level: The VGT-800 is designed for low noise operation, typically around 54 decibels, comparable to normal conversation.
Image illustrating the low noise operation of the ultrasonic cleaner, showing a working sound level of 54 decibels.
Figure 9: Low Noise Operation

11. Warranty and Support

For warranty information or technical support, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.