ENCHEN Beardo 2 Multi-functional Trimmer User Manual

Introduction

Welcome to the user manual for your ENCHEN Beardo 2 Multi-functional Trimmer. This device is designed for versatile grooming, suitable for beard, hair, body, and groin areas. Please read this manual thoroughly before using the product to ensure safe and optimal performance.

Key Features

• Multi-functional Design: Capable of trimming beard, hair, body, and groin areas.
• Powerful Motor: Equipped with an 8000RPM high-frequency speed motor for efficient trimming, with noise levels less than 65dB.
• Advanced Li-ion Battery: Features a 1200mAh/3.7V Li-ion battery, providing up to 3 months of cordless trimming on a 1.5-hour charge.
• Type-C Charging: Convenient and fast charging via a universal Type-C interface.
• Ultra-Sharp & R-Type Cutter Blade: Blades are designed for smooth and safe trimming, cutting through hair easily while being gentle on the skin.
• Smart Travel Lock: Prevents accidental activation during transportation, ensuring safety and battery preservation.
• LED Light Indicator: Provides a clear indication of the power level, reminding you when to charge.
• Ergonomic Design: Enhanced personal trimmer with an easy-grip design for comfortable handling.
• Detachable Guide Combs: Includes 4 adjustable trimming guards (3mm, 6mm, 9mm, 12mm) to customize hair length.

Package Contents

Please check the box for the following items:

• 1 x ENCHEN Beardo 2 Trimmer
• 1 x USB Charging Cable (Type-C)
• 1 x Lubricating Oil
• 1 x Cleaning Brush
• 4 x Limited Combs (3mm, 6mm, 9mm, 12mm)
• 1 x User Manual (this document)

Specifications

Setup

Initial Charging

Before first use, fully charge your ENCHEN Beardo 2 Trimmer.

1. Connect the provided Type-C USB charging cable to the trimmer's charging port.
2. Plug the other end of the USB cable into a compatible DC 5V power adapter (not included) or a USB port.
3. The LED indicator will show the charging status. A full charge takes approximately 1.5 hours.
4. Once fully charged, disconnect the trimmer from the power source.

Attaching and Detaching Guide Combs

The trimmer comes with 4 detachable guide combs (3mm, 6mm, 9mm, 12mm) for various trimming lengths.

• To Install: Choose the appropriate length limit comb. Align the blade and buckle the limit comb into the T-head until it clicks securely into place.
• To Remove: Press and hold the tail of the comb and gently pull it outward to remove it.

Operation

Turning On/Off

Press the power button located on the front of the trimmer to turn it on or off.

Using the Trimmer

1. Ensure the trimmer is charged and a suitable guide comb is attached if desired.
2. Turn on the trimmer.
3. For trimming hair, move the trimmer against the direction of hair growth.
4. For different styles, refer to the haircut tips:
• Bald head (0.8-2.55mm): Put the comb parallel to the scalp, push from bottom to top and trim the sides.
• Buzz cut (3-6mm): Put the comb parallel to the scalp, trim back hair.
• Longer cut (9-12mm): Hold the hair with your fingers, pan along the fingers, and trim the top of the head.
5. After use, turn off the trimmer.

Travel Lock Function

The smart travel lock prevents the trimmer from accidentally turning on during transport.

• To activate the travel lock: Press and hold the power button for a few seconds until the indicator light changes or a lock symbol appears (if applicable).
• To deactivate the travel lock: Press and hold the power button again for a few seconds.

Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your trimmer.

1. Lubricate Blades: When starting to use this product, a little lubricating oil should be added to the teeth of the tool bit.
2. Power Off: Turn off the power switch and remove the plug of the power adapter from the power outlet.
3. Clean Blades: Remove the limit comb, remove the tool bit (if necessary), use the attached cleaning brush, and brush off the shavings in the slot part of the tool bit.

Warning: This machine is non-waterproof. Please do not rinse the body of the shaving machine with water.

Troubleshooting

If you encounter any issues with your trimmer, please refer to the following common problems and solutions:

• Trimmer does not turn on:
  • Ensure the battery is charged. Connect the trimmer to the charger and check the LED indicator.
  • Check if the travel lock is activated. Deactivate it by pressing and holding the power button.
• Poor trimming performance / pulling hair:
  • Clean the blades thoroughly using the provided brush to remove any trapped hair or debris.
  • Apply a few drops of lubricating oil to the blades as described in the Maintenance section.
  • Ensure the guide comb is correctly attached and not damaged.
  • The battery might be low. Charge the trimmer fully.
• Trimmer makes unusual noise:
  • Turn off the trimmer and inspect the blades for any foreign objects or damage.
  • Clean and lubricate the blades.

User Tips

• For optimal battery life and convenience, ensure the trimmer is fully charged before extended use. The 51-90 minutes of battery life provides flexibility for multiple grooming sessions.
• The ABS material construction makes the trimmer durable for everyday use.
• Always use the appropriate guide comb for your desired hair length to achieve consistent results.
• Remember to activate the travel lock when packing the trimmer for trips to prevent accidental power-on.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the purchase documentation or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.

Important Safety Information

• Do not immerse the trimmer in water or use it in the shower/bath, as it is not waterproof.
• Keep the appliance out of reach of children.
• Ensure the charging cable is not damaged before use.
• Do not attempt to repair the appliance yourself. Contact qualified personnel for service.
• Store the trimmer in a dry place when not in use.
• Only use the trimmer for its intended purpose as described in this manual.