1. Introduction
This manual provides comprehensive instructions for the safe and efficient use of your VEVOR Compound Multifunction Milling Machine Work Table. This precision tool is designed to enhance the capabilities of various machine tools, offering dual-axis positioning for accurate drilling, grinding, and milling operations. Please read this manual thoroughly before initial use and retain it for future reference.
Figure 1: VEVOR Compound Multifunction Milling Machine Work Table
2. Safety Information
Always observe basic safety precautions to reduce the risk of personal injury or damage to the equipment. Failure to follow these instructions may result in serious injury.
- Read and understand all instructions before operating the machine.
- Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection.
- Ensure the work table is securely mounted to a stable and appropriate machine tool before use.
- Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate the machine in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating the machine.
- Do not overreach. Maintain proper footing and balance at all times.
- Disconnect power from the main machine tool before making any adjustments or maintenance.
- Never leave the machine unattended while it is operating.
3. Product Components
The VEVOR Compound Multifunction Milling Machine Work Table consists of the following key components:
- Worktable Surface: The main platform where workpieces are mounted. Features three T-slots for secure clamping.
- Cast Iron Base: Provides a heavy-duty, stable foundation for the work table.
- X-Axis Handwheel: Controls the transverse (side-to-side) movement of the worktable.
- Y-Axis Handwheel: Controls the longitudinal (front-to-back) movement of the worktable.
- Adjustable Handles: Ergonomically designed handwheels with clear scales for precise adjustments.
- Fixed Lock: Mechanism to secure the worktable in a desired position.
- Lock Fastener: Used to tighten and secure movable parts.
- Oil Injection Hole: Points for lubrication to ensure smooth operation and longevity.
- Roughening Screw Rod: Part of the adjustment mechanism, contributing to smooth movement.
Figure 2: Key components including Fixed Lock, Lock Fastener, and Oil Injection Hole
Figure 3: Structural details highlighting the Surface Finishing Table, Cast Iron Base, and Roughening Screw Rod
4. Specifications
The following table outlines the technical specifications of the VEVOR Compound Multifunction Milling Machine Work Table:
| Feature | Measurement |
|---|---|
| Worktable Length | 450 mm / 17.7 in |
| Worktable Width | 170 mm / 6.7 in |
| Transverse Travel (X-Route) | 210 mm / 8.3 in |
| Longitudinal Travel (Y-Route) | 110 mm / 4.3 in |
| Overall Height | 100 mm / 3.9 in |
| Item Dimensions (L x W x H) | 58 x 33 x 12.7 cm / 23 x 13 x 5 in |
| Net Weight | 30 kg / 66 lbs approx. |
| Mounting Hole Size (Transverse) | 15.7 cm / 6.2 in |
| Mounting Hole Size (Longitudinal) | 13.5 cm / 5.3 in |
| Chassis Size | 26 x 23 cm / 10 x 9 in |
Figure 4: Product dimensions
5. Setup and Installation
Proper setup is crucial for the stability and accuracy of the work table.
- Unpacking: Carefully remove all components from the packaging. Inspect for any shipping damage.
- Cleaning: Clean any protective oils or grease from the work table surfaces and moving parts using a suitable degreaser.
- Mounting:
- Position the work table on a stable and level surface of your bench drill, milling machine, or other compatible machine tool.
- Align the mounting holes on the base of the work table with the corresponding holes on your machine. Refer to the "Mounting Hole Size" in the specifications.
- Secure the work table firmly using appropriate bolts and nuts. Ensure all fasteners are tightened to prevent any movement during operation.
- Initial Lubrication: Apply a small amount of machine oil to the lead screws and sliding surfaces through the oil injection holes, to ensure smooth initial operation.
6. Operation
The compound work table allows for precise two-axis movement to position your workpiece accurately.
- Workpiece Clamping:
- Place your workpiece on the worktable surface.
- Utilize the three T-slots on the worktable to securely clamp the workpiece using appropriate T-slot clamps (not included). Ensure the workpiece is stable and will not shift during machining.
- Adjusting X-Axis (Transverse Travel):
- To move the worktable left or right, rotate the X-axis handwheel.
- Observe the accurate scale on the handwheel for precise positioning.
- Once the desired X-position is reached, use the fixed lock or lock fastener (if present for X-axis) to secure the position.
- Adjusting Y-Axis (Longitudinal Travel):
- To move the worktable forward or backward, rotate the Y-axis handwheel.
- Observe the accurate scale on the handwheel for precise positioning.
- Once the desired Y-position is reached, use the fixed lock or lock fastener (if present for Y-axis) to secure the position.
- Precision Machining: The ergonomic hand circles and accurate scales allow for fine adjustments, enabling precision machining tasks.
Video 1: Demonstration of X and Y axis movement using the handwheels.
Figure 5: Illustration of 2-axis, 4-way movement
Figure 6: Features for high-precision operation
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your work table.
- Cleaning: After each use, clean the worktable surface and all moving parts to remove chips, dust, and debris. Use a brush or compressed air.
- Lubrication: Periodically apply machine oil to the lead screws and sliding surfaces through the oil injection holes. This prevents rust and ensures smooth movement.
- Inspection: Regularly check all bolts, nuts, and fasteners for tightness. Tighten any loose components to maintain stability and accuracy.
- Storage: When not in use, store the work table in a clean, dry environment to prevent corrosion.
Figure 7: Bolts, nuts, and roughening screw rod for adjustment and maintenance
8. Troubleshooting
This section addresses common issues you might encounter with your work table.
| Problem | Possible Cause | Solution |
|---|---|---|
| Worktable movement is stiff or jerky. | Lack of lubrication, debris on lead screws, or overtightened fasteners. | Clean lead screws and sliding surfaces. Apply machine oil. Check and loosen any overtightened lock fasteners. |
| Inaccurate positioning. | Loose mounting bolts, worn lead screws, or incorrect reading of scales. | Ensure the work table is securely mounted. Verify scale readings. If lead screws are worn, contact VEVOR support for replacement parts. |
| Workpiece shifts during operation. | Improper clamping or insufficient clamping force. | Ensure clamps are correctly positioned in the T-slots and tightened securely. Use appropriate clamping accessories for the workpiece. |
9. User Tips
Based on common user experiences, here are some tips for optimizing your use of the VEVOR Compound Multifunction Milling Machine Work Table:
- For very fine adjustments, approach the final position from the same direction to minimize backlash.
- Always double-check the tightness of all locks and fasteners before beginning any machining operation.
- Consider using a dial indicator for extremely precise positioning requirements.
- Keep a dedicated set of cleaning tools and lubricants near your workstation for easy maintenance.
10. Warranty and Support
VEVOR provides a one-year warranty for this product, covering manufacturing defects and material faults under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty claims, or inquiries about replacement parts, please contact VEVOR customer service through their official website or the contact information provided with your purchase.
VEVOR Factory Store
Origin: Mainland China
