1. Introduction
Thank you for choosing the MiLESEEY X5/X6 Series Laser Distance Meter. This device is designed for precise and efficient distance measurements, offering various functions for professional and DIY applications. Please read this manual carefully before using the device to ensure safe and correct operation.

General view of the Mileseey Laser Distance Meter.
2. Product Overview
2.1 Key Features
- High-precision laser measurement (±2mm accuracy).
- Multiple measurement modes: Single, Continuous, Area, Volume, Pythagorean (two types), Automatic Level, Automatic Vertical.
- HD backlit display for clear readings in various lighting conditions.
- Data storage for up to 20 historical records.
- Mute mode for quiet operation.
- Automatic shutdown to conserve battery life.
- Durable, dustproof, and waterproof design (IP54).
- Compact and portable.
2.2 Device Layout and Buttons

Product information diagram labeling display screen, function keys, switch machine, benchmark/unit key, measurement key, plus/minus keys, historical data/mute.
- Display Screen: Shows measurement data, battery status, and mode indicators.
- Function Keys: Used to select measurement modes (Area, Volume, Pythagorean, etc.).
- Switch Machine (Power Button): Turns the device ON/OFF.
- Benchmark/Unit Key: Short press to change the measurement reference point (front/rear of device). Long press to change measurement units (m/in/ft/ft+in).
- Measurement Key (MEAS): Activates the laser and triggers measurements.
- Plus and Minus Keys (+/-): Used for addition and subtraction of measurements.
- Historical Data/Mute Key: Accesses stored data or toggles mute mode.
- Clear Key: Clears the current measurement or exits a menu.
- Level Bubble: (For S6 model) Provides visual indication for horizontal alignment.
3. Setup
3.1 Battery Installation
The X5 and X6-no-charge models require 2 or 3 AAA 1.5V batteries (not included). The X6-chargeable model includes a rechargeable battery and a USB cable.
- Locate the battery compartment on the back of the device.
- Open the battery compartment cover.
- Insert the batteries according to the polarity markings (+/-).
- Close the battery compartment cover securely.
For X6-chargeable models, connect the device to a USB power source using the provided USB cable to charge the internal battery.
3.2 Power On/Off
- To Power On: Press the Switch Machine button.
- To Power Off: Long press the Switch Machine button. The device will also automatically shut down after three minutes of inactivity to save power.

The device features automatic shutdown after three minutes of inactivity to conserve battery life.
4. Operating Instructions
4.1 Changing Measurement Reference Point
The device can measure from its front or rear edge. Short press the Benchmark/Unit Key to toggle between these reference points. The display will indicate the current reference point.
4.2 Changing Measurement Units
Long press the Benchmark/Unit Key to cycle through available units: meters (m), inches (in), feet (ft), and feet+inches (ft+in).
4.3 Single Distance Measurement
- Turn on the device. It will default to single distance measurement mode.
- Aim the laser at the target point.
- Press the MEAS button to activate the laser and take a measurement. The result will be displayed on the screen.

Diagram illustrating a single distance measurement.
4.4 Continuous Measurement (Min/Max)
- Press the Function Key (often represented by a square grid icon) until the continuous measurement icon appears.
- Long press the MEAS button to activate continuous measurement.
- Sweep the laser slowly back and forth over the desired target area. The screen will display the current measurement, as well as the minimum and maximum values recorded during the sweep.
- Press MEAS again to stop the measurement. This function will automatically stop after approximately 40 seconds of inactivity.

Continuous measurement mode displaying minimum and maximum values.
4.5 Area Measurement
- Press the Function Key until the area measurement icon (square with 'm²') appears.
- The display will show a flashing line, indicating the first side to measure (length). Aim the laser and press MEAS.
- The next flashing line indicates the second side (width). Aim the laser and press MEAS.
- The device will automatically calculate and display the area.

Diagram illustrating how to perform an area measurement.
4.6 Volume Measurement
- Press the Function Key until the volume measurement icon (cube with 'm³') appears.
- Follow the flashing lines on the display to measure length, width, and height sequentially by aiming the laser and pressing MEAS after each dimension.
- The device will automatically calculate and display the volume.

Diagram illustrating how to perform a volume measurement.
4.7 Pythagorean Measurement (Indirect Measurement)
This mode is used to calculate inaccessible heights or distances using the Pythagorean theorem.
4.7.1 Single Pythagorean (Two-point measurement)
- Press the Function Key until the single Pythagorean icon (right triangle) appears.
- Measure the hypotenuse (distance from device to top of object) by aiming and pressing MEAS.
- Measure the base (distance from device to bottom of object, ensuring the device is level) by aiming and pressing MEAS.
- The device will calculate and display the height.

Diagram for single Pythagorean measurement (calculating height).
4.7.2 Double Pythagorean (Three-point measurement)
- Press the Function Key until the double Pythagorean icon (two right triangles) appears.
- Measure the first hypotenuse (distance from device to top of object) by aiming and pressing MEAS.
- Measure the second hypotenuse (distance from device to middle point of object) by aiming and pressing MEAS.
- Measure the base (distance from device to bottom of object, ensuring the device is level) by aiming and pressing MEAS.
- The device will calculate and display the total height.

Diagram for double Pythagorean measurement (calculating height from two points).
4.8 Automatic Level (X6 Series Only)
This function allows the device to automatically calculate horizontal distance.
- Press the Function Key until the automatic level icon appears.
- Aim the laser at the target point. The device will automatically detect the angle and calculate the horizontal distance.
- The result will be displayed on the screen.

Diagram illustrating automatic level measurement.
4.9 Automatic Vertical (X6 Series Only)
This function allows the device to automatically calculate vertical distance.
- Press the Function Key until the automatic vertical icon appears.
- Aim the laser at the target point. The device will automatically detect the angle and calculate the vertical distance.
- The result will be displayed on the screen.

Diagram illustrating automatic vertical measurement.
4.10 Addition and Subtraction
After taking a measurement, press the + or - button to add or subtract subsequent measurements. The result will be updated on the display.
4.11 Historical Data Storage
The device can store up to 20 groups of historical measurement data. Press the Historical Data/Mute Key to view stored records. Use the + or - buttons to navigate through the records.

The device stores up to 20 sets of historical data for easy reference.
4.12 Mute Mode
Press the Historical Data/Mute Key (short press) to toggle the buzzer sound on or off. This is useful for operating in quiet environments.

Mute mode allows for silent operation in quiet environments.
5. Specifications

Detailed specifications for the X5 and X6 series models.
| Feature | X5 | X6-no-charge | X6-Rechargeable |
|---|---|---|---|
| Range | 0.2-60M | 0.2-40M/60M/80M/100M | 0.2-40M/60M/80M/100M |
| Measurement Accuracy | ±(2mm+5x10⁻⁵D) | ±2mm | ±2mm |
| Measuring Units | m/in/ft/ft+in | m/in/ft/ft+in | m/in/ft/ft+in |
| Laser Class | Class 2 | Class 2 | Class 2 |
| Laser Type | 635nm, <1mW | 630-670nm, <1mW | 630-670nm, <1mW |
| Area, Volume Measurement | Yes | Yes | Yes |
| Pythagorean | Yes | Yes | Yes |
| Secondary Pythagorean | Yes | Yes | Yes |
| Automatic Level | No | Yes | Yes |
| Automatic Vertical | No | Yes | Yes |
| Addition and Subtraction | Yes | Yes | Yes |
| Angle Sensor | No | Yes | Yes |
| Rechargeable | No | No | Yes |
| Angle Measurement Accuracy | / | ±(0.3° + 0.1° + 0.01*D) | ±(0.3° + 0.1° + 0.01*D) |
| Measurement Benchmark | Before/after benchmark | Before/after benchmark | Before/after benchmark |
| Automatic Shut-down | 3 minutes | 3 minutes | 3 minutes |
| Screen Type | 2.0 inch screen | 2.0 inch screen | 2.0 inch screen |
| Historical Memory | 20 groups | 20 groups | 20 groups |
| Operating Temperature | 0-40℃ (32°F-104°F) | 0-40℃ (32°F-104°F) | 0-40℃ (32°F-104°F) |
| Storage Temperature | -10-60℃ | -10-60℃ | -10-60℃ |
| Auto Laser Off | 30 seconds | 30 seconds | 30 seconds |
| Auto Instrument Off | 180 seconds | 180 seconds | 180 seconds |
| Battery Type | 2*AAA (not included) | 3*AAA (not included) | 3*AAA (rechargeable) |
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or solvents.
- Lens Care: The laser lens is a sensitive component. Clean it gently with a soft cloth, similar to cleaning camera lenses.
- Storage: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. If not used for extended periods, remove non-rechargeable batteries to prevent leakage.
- Avoid Impact: While durable, avoid dropping or subjecting the device to strong impacts to maintain accuracy.
- Water/Dust Protection: The device has an IP54 rating, meaning it is protected against dust ingress and splashing water. Do not immerse it in water.

The device is designed with dustproof and waterproof features for enhanced durability.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on | Low or dead batteries; Incorrect battery installation | Replace batteries or recharge (X6-chargeable). Ensure correct polarity. |
| Inaccurate measurements | Unstable surface; Obstruction in laser path; Dirty lens; Measurement beyond range | Ensure stable measurement. Clear laser path. Clean lens. Check if target is within specified range. |
| Laser not visible | Bright ambient light; Laser not activated | Use in lower light conditions or use a target plate. Press MEAS button to activate laser. |
| Display error message | Internal error; Measurement error | Turn off and restart the device. If error persists, contact support. |
8. User Tips
- For best accuracy, ensure the device is held steady and the target surface is flat and reflective.
- When measuring long distances or in bright sunlight, using a reflective target plate can improve accuracy and range.
- Always check the measurement reference point (front or rear) before taking critical measurements.
- Utilize the continuous measurement mode for quickly finding minimum and maximum distances in a space.
- The mute function is particularly useful in environments where beeping sounds might be disruptive.
Video demonstrating the ease of use of the laser distance meter compared to traditional tape measures.
9. Warranty and Support
MiLESEEY products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your purchase receipt as proof of purchase.