HONGWIN 90980-11145

Contents

HONGWIN 3-Pin Connector Housing Harness Plug

Model: 90980-11145

Introduction

This manual provides instructions for the HONGWIN 3-Pin Connector Housing Harness Plug, designed as a replacement or repair component for various automotive electrical systems. It is compatible with specific Toyota and Lexus applications, including speed sensors, Idle Air Control Valves (IACV), and Idle Air Control (IAC) systems. This connector is a direct replacement for OEM part number 90980-11145.

HONGWIN 3-Pin Connector Housing Harness Plug, 10 pieces shown

Image: Overview of the HONGWIN 3-Pin Connector Housing Harness Plug, illustrating a pack of 10 pieces.

Specifications

AttributeValue
Model Number (OEM NO.)90980-11145, 90980 11145, 9098011145
Interchange Part Number90980-11145, 90980 11145, 9098011145
Other Part Number90980-11145, 90980 11145, 9098011145
Special FeaturesConnector Harness Plug
MaterialPlastic
Placement on VehicleFRONT
Item Weight25g
CompatibilityFor Toyota Lexus (1ZZFE, 2ZZGE, 1MZFE VVT-i, IAC connector)
OriginMainland China
Country/Region of ManufactureJapan

Dimensions

Dimensional drawing of the 3-pin connector and harness

Image: Detailed dimensions of the connector and its wiring harness.

  • Connector Width: 24.3mm (0.95")
  • Connector Height: 14.8mm (0.58")
  • Overall Length (Connector + Wires): 178mm (7.01")
  • Connector Body Length: 27.3mm (1.07")
  • Connector Body Width: 23.8mm (0.93")

Package Contents

The package contains the selected quantity of HONGWIN 3-Pin Connector Housing Harness Plugs. Available quantities include 1 piece, 5 pieces, or 10 pieces.

  • 1x HONGWIN 3-Pin Connector Housing Harness Plug (if 1pcs selected)
  • 5x HONGWIN 3-Pin Connector Housing Harness Plugs (if 5pcs selected)
  • 10x HONGWIN 3-Pin Connector Housing Harness Plugs (if 10pcs selected)
Single 3-pin connector harness plug

Image: A single 3-pin connector.

Pack of 10 3-pin connector harness plugs

Image: A pack of 10 3-pin connectors.

Installation Instructions

This connector is intended for replacement or repair of existing wiring harnesses. Professional installation is recommended. Always ensure the vehicle's battery is disconnected before performing any electrical work.

  1. **Verify Compatibility:** Before beginning installation, it is crucial to confirm that the OEM part number of your old connector matches 90980-11145. Visually compare the new connector with the old one and the female socket it connects to.
  2. 3-pin connector fitting into a female socket

    Image: Illustration of the 3-pin connector properly fitting into a compatible female socket (example socket reference: 8971363250).

  3. **Safety First:** Disconnect the negative terminal of the vehicle's battery to prevent accidental short circuits or electrical shocks.
  4. **Locate and Remove Old Connector:** Identify the faulty or damaged connector on your vehicle's wiring harness. Carefully disconnect it from its mating component. If the old connector is part of a larger harness, you may need to cut and splice wires.
  5. **Prepare Wires:** If splicing, strip a small amount of insulation from the ends of the vehicle's existing wires and the new connector's wires. Ensure a clean, secure connection.
  6. Close-up of 3-pin connector wires: red, black, green

    Image: Close-up view of the connector's three wires, typically colored red, black, and green for identification.

  7. **Wire Connection:** Connect the wires of the new harness plug to the corresponding wires of the vehicle's harness. It is critical to match wire colors or pin assignments correctly to ensure proper function. Use appropriate crimp connectors, solder, and heat shrink tubing for a durable and weather-resistant connection.
  8. **Secure New Connector:** Once wired, connect the new 3-pin harness plug to its mating component (e.g., speed sensor, IACV). Ensure it clicks securely into place.
  9. **Reconnect Battery:** Reconnect the negative terminal of the vehicle's battery.
  10. **Test Functionality:** Start the vehicle and test the component connected by the new harness plug to ensure it is functioning correctly.

Operation

The HONGWIN 3-Pin Connector Housing Harness Plug is a passive electrical component. Its function is to provide a secure and reliable electrical connection between a vehicle's wiring harness and a specific sensor or valve (such as a speed sensor or IACV). Once correctly installed, it facilitates the transmission of electrical signals and power as intended by the vehicle's design, without requiring any user interaction.

Maintenance

This connector requires minimal maintenance. Periodically inspect the connector and its wiring for any signs of wear, corrosion, or damage. Ensure the connection remains secure and free from debris or moisture. If any damage is observed, replace the connector promptly to prevent electrical issues.

Troubleshooting

  • **Connector Does Not Fit:**

    Ensure the OEM part number of your original connector precisely matches 90980-11145. There are many similar-looking connectors; a slight difference can prevent proper fitment. Double-check the vehicle's make, model, and year for compatibility.

  • **Component Malfunction After Installation:**

    Verify all wire connections are secure and correctly matched (color-to-color or pin-to-pin). An incorrect wiring sequence can lead to component malfunction or damage. Ensure the connector is fully seated and locked into its mating component. Check for any bent pins or debris within the connector terminals.

  • **Intermittent Connection:**

    Inspect for loose wire connections, corrosion on terminals, or damage to the connector housing. Ensure any splices are properly insulated and sealed from moisture.

User Tips

  • Always cross-reference the OEM part number (90980-11145) with your vehicle's original part to guarantee a perfect fit.
  • When replacing, take a photo of the original wiring before disconnecting to aid in correct re-wiring.
  • For enhanced durability and weather resistance, consider using dielectric grease on the connector pins and heat-shrink tubing over any spliced wire connections.
  • If you are unsure about the wiring process, consult a professional automotive technician.

Warranty and Support

This HONGWIN product comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical assistance, or any product-related inquiries, please contact HONGWIN Store customer support directly through your purchase platform.

Please retain your proof of purchase for warranty validation.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.