1. Introduction
The FENVI AX1800 WiFi6 Wireless Repeater is designed to extend the range of your existing Wi-Fi network, eliminating dead zones and providing a stronger, more reliable signal throughout your home or office. Featuring dual-band support (2.4GHz and 5GHz) and the latest Wi-Fi 6 (802.11ax) technology, it delivers high-speed wireless connectivity for all your devices.
2. Package Contents
Please check the package for the following items:
- FENVI AX1800 WiFi6 Wireless Repeater
- Quick Manual / User Guide
3. Setup Instructions
Follow these steps to set up your FENVI AX1800 WiFi6 Wireless Repeater:
- Plug in the Extender: Plug your WiFi extender into a power outlet and wait for 30 seconds.
- Observe LED Indicator: After power on, the LED light will change from Green to Blue. This indicates it's ready for setup.
- Connect to Extender SSID: On your device (phone/computer), connect to the Extender's SSID (e.g., WIFI_2.4G_XXXX or WIFI_5G_XXXX). Both 2.4G and 5G are available; choose 5G for initial setting.
- Note: Please remember to turn off your mobile network data. You will not have internet access until all setting steps are complete. If your phone prompts that the network cannot be connected, click to continue.
- If Abnormal: If the extender is abnormal, press the "reset" button on the side of the product for 8 seconds, or contact seller.
- Access Setup Page: If you click connect on your phone and no jumping interface appears, manually enter the URL
192.168.188.1in your browser. - Select Main Router WiFi: Select the WiFi SSID from your main router that you want to extend. Both 2.4G and 5.8G networks can be selected together. If the WiFi SSID doesn't appear, please refresh several times.
- Enter Main Router Password: Enter the WiFi password of your main router into the password box. Click "Next".
- Set New Wireless Names and Passwords: Set the new wireless names and passwords for the Extender. You can change the default SSID (e.g., original SSID-PRO-2.4G/5G). If you don't want to modify, you can proceed to the next step.
- Confirm Settings: Confirm the new wireless names and passwords again.
- Start Connection: After checking, click "Start Connect" and wait 30-60 seconds. The extender will connect to the router.
- Wait for 60 Seconds: Allow 60 seconds for the setting to complete. Observe the signal indicator. If it lights up, the relay is successful.
- Reconnect to Extender WiFi: Reselect and reconnect to your Extender WiFi hotspot. The new WiFi name defaults to the original WiFi name plus PRO-2.4G or 5G.
4. Operating Instructions
Once successfully set up, your FENVI AX1800 WiFi6 Wireless Repeater will automatically extend your Wi-Fi network. You can connect your devices to the extended network using the new SSID and password you configured during setup.
Intelligent Signal Indicator
The repeater features an intelligent signal indicator to help you determine the best position for optimal Wi-Fi coverage:
- Green: Means greater signal strength.
- Red: Means weak signal.
- Blue: Means unsuccessful connection.
Place the extender in a location where the indicator shows a green light for the best performance.
5. Maintenance
To ensure the longevity and optimal performance of your FENVI AX1800 WiFi6 Wireless Repeater, consider the following maintenance tips:
- Keep the device in a well-ventilated area to prevent overheating.
- Avoid placing the device near sources of strong electromagnetic interference (e.g., microwaves, cordless phones).
- Clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Periodically check for firmware updates on the manufacturer's website to ensure the best performance and security.
Resetting the Repeater
If you encounter persistent issues or wish to revert to factory settings, you can reset the repeater:
- Long press the reset button for 10 seconds while the device is powered on. (Note: This is NOT the WPS button; the reset button is typically a small pinhole on the side of the device).
6. Troubleshooting
Here are some common issues and their solutions:
- Q1: Can't connect to the internet after finishing setup?
-
- Check if you entered the same password as your main router.
- Ensure there are no special characters (e.g., *, &, ^, %, $, #, @, !) in your router's password. If there are, change your router password as the repeater may not identify special characters.
- Q2: What should I do if I cannot access the Repeater's web management page?
-
- Make sure your computer is connected to the extended network.
- Ensure your computer is set to obtain an IP address automatically.
- If the Repeater has connected to the router, check your router's DHCP client list to obtain the Repeater's current IP address.
- Reset the Repeater and try again.
- Q3: Why does the wireless transmission rate speed down when the wireless signal is stronger after being repeated by the Extender?
-
In compliance with the wireless transmission protocol, all Repeater devices are set to work in half-duplex instead of full-duplex mode. This means the repeater processes one-way communication between your root Wireless router (or AP) and the terminal clients, which can double the transmission time and decrease speed. It is recommended to connect to the extender when your home network connection is poor or when you want larger wireless coverage to eliminate 'dead zones'.
- Q4: Why can't devices connected to the Repeater get an IP address from the Repeater and access the Internet?
-
- You might have enabled a wireless MAC filter, wireless access control, or access control list (ACL) on your router. Log into your router and disable these features.
- The Repeater might not have successfully connected to your router. Reset the Repeater and reconfigure it.
- The IP address of the router might be occupied, or the number of wireless devices connected by the router has reached its limit. Reboot your router, then reset the Repeater and reconfigure it.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | fenvi |
| Wireless Communication Standard | 802.11.ax |
| Wireless Transmission Rate | 1800M |
| Frequency Band Class | Dual-Band (2.4G & 5G) |
| Wi-Fi Supported Frequency | 2.4G & 5G |
| 5G Wi-Fi Transmission Rate | 1000Mbps (up to 1201Mbps) |
| 2.4G Wi-Fi Transmission Rate | 450 Mbps (up to 573Mbps) |
| Wired Transfer Rate | 10/100/1000Mbps |
| WAN Ports | 1 x 10/100/1000Mbps |
| LAN Ports | 1 |
| Function | Firewall |
| With Modem Function | No |
| Supports WPS | No |
| Supports WDS | No |
| Standards And Protocols | Wi-Fi 802.11ac (and 802.11ax/a/b/g/n) |
| Number of USB Interfaces | None |
| Max. LAN Data Rate | 1750Mbps |
| Certification | CE |
| Application | Home |
| Origin | Mainland China |
8. User Tips
- Speed Expectations: Be aware that a Wi-Fi repeater operates in half-duplex mode, which can reduce the overall speed compared to a direct connection to your main router. The primary purpose of a repeater is to extend coverage and eliminate dead zones, not necessarily to increase maximum throughput. For example, if your main router provides 500Mbps, the repeater might output around 220Mbps.
- Router Compatibility: To achieve maximum Wi-Fi 6 speeds (1.8 Gbps), ensure your main Wi-Fi router supports Wi-Fi 6 (802.11ax) and operates at 160MHz channel width.
- Optimal Placement: Use the intelligent signal indicator on the device to find the best location. A green light indicates a good signal from your main router, ensuring effective extension.
- Avoid Special Characters in Passwords: When setting up, avoid using special characters in your main router's Wi-Fi password, as the repeater may not recognize them, leading to connection issues.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official FENVI website or the comprehensive user manual available in PDF format. The PDF manual can be accessed via the following link: FENVI AX1800 User Manual (PDF).
If you require further assistance, please contact FENVI customer support through their official channels.