Introduction
This instruction manual provides detailed guidance for assembling and operating your TOYLINX TOYS 67117 Building Blocks City Speed Car. This set allows children to construct a detailed 1:18 scale off-road vehicle using small, interlocking plastic bricks. Designed to foster creativity, hand-eye coordination, and problem-solving skills, this building block set offers an engaging and educational experience for children aged 3-18+ years.
The finished model features a strong pull-back mechanism, openable doors and hood, and cool wheels with a metallic appearance, providing both an enjoyable building process and interactive play.
Safety Information
- California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Choking Hazard: This product contains small parts that could pose a choking hazard if swallowed. Ensure children do not put them in their mouths.
- Adult Supervision: Adult supervision is required during assembly and play to prevent any potential accidents or injuries.
- Packaging: The edges of the packaging bag may be sharp; please handle with care to avoid scratches.
Package Contents
Your TOYLINX TOYS 67117 Building Blocks City Speed Car set includes:
- Approximately 485 easy-installation building block parts, sorted into numbered bags.
- One instruction manual (this document and a physical booklet).
- Sticker sheet for vehicle detailing.
Please verify all parts are present upon opening the package. If any parts are missing or broken, refer to the Troubleshooting section.
Video demonstrating the unboxing and assembly process of the building block set.
Assembly Instructions (Setup)
Follow these general steps to assemble your building block vehicle. For detailed visual guidance, please refer to the included physical instruction booklet (PDF link also available in the Warranty & Support section).
- Unpack and Sort: Carefully open the numbered bags containing the building blocks. It is recommended to sort the pieces by type or color into a tray to facilitate easier assembly.
- Follow Numbered Steps: The instruction booklet provides step-by-step diagrams. Each step indicates the required parts and their placement. Pay close attention to the 1:1 scale diagrams for accurate part identification.
- Initial Chassis Assembly: Begin by constructing the base chassis of the vehicle. This typically involves connecting the main structural beams and axles. (Refer to steps 1-5 in the instruction booklet).
- Adding Interior Components: Proceed to build the interior, including seats and steering wheel. (Refer to steps 55-60 in the instruction booklet).
- Bodywork and Details: Attach the main body panels, roof, and other exterior details. Ensure all connections are secure.
- Wheel Assembly: Assemble the wheels by attaching the tires to the wheel hubs. Then, securely attach the complete wheel assemblies to the vehicle's axles. (Refer to steps 139-140 in the instruction booklet).
- Apply Stickers: Once the vehicle is fully assembled, carefully apply the provided stickers to the designated areas on the vehicle body, such as the hood and side panels, to add realistic detailing.
The assembly process is designed to be enjoyable and intuitive. Take your time and ensure each piece is correctly placed for a stable and functional model.
Operating Instructions
Your TOYLINX TOYS 67117 Building Blocks City Speed Car is designed for interactive play:
- Pull-Back Function: The vehicle features a strong pull-back mechanism. To activate, pull the car backward along a flat surface and then release it. The car will propel forward approximately 10 meters.
- Openable Features: The doors and hood of the vehicle can be opened, allowing for enhanced play scenarios and closer inspection of the interior details.
Side view of the assembled vehicle, emphasizing the strong pull-back mechanism.
Image showing multiple openable doors and hood on the building block car.
Maintenance
To ensure the longevity and cleanliness of your building block set:
- Cleaning: Use a soft, dry cloth to gently wipe dust from the blocks. For more thorough cleaning, use a mild soap solution and water, then rinse thoroughly and allow to air dry completely before storage.
- Storage: Store the blocks in a cool, dry place away from direct sunlight to prevent discoloration or warping. Keep them in a container to prevent loss of small parts.
- Avoid Extreme Temperatures: Do not expose the blocks to extreme heat or cold, as this can damage the plastic material.
Troubleshooting
- Missing or Broken Parts: If you find any missing or broken parts upon receiving your product, please contact customer support. We will arrange to send the missing parts to you for free.
- Difficulty in Assembly: If you encounter difficulty during assembly, double-check the instruction booklet for the specific step. Ensure you are using the correct parts and that they are oriented correctly. Sometimes, a firm push is needed to secure connections.
Specifications
| Attribute | Value |
|---|---|
| Model Number | 67117 |
| Material | Plastic (ABS) |
| Plastic Block Shape | Self-Locking Bricks |
| Block Size | Small building block (Compatible with Lego) |
| Gender | Unisex |
| Recommend Age | 3-6Y, 6-12Y, 14+y, 18+ |
| Is Electric | No Battery |
| Barcode | Yes |
| Certification | CE (Certificate Number: U01101230516101-1E) |
| Package Length | 28 cm |
| Package Width | 27 cm |
| Package Height | 7 cm |
| Package Weight | 0.373 kg |
Detailed view of the assembled pink off-road vehicle, showing proportional size (1:18 scale) and dimensions.
Features of the building blocks: ABS material, true reproduction, flashing wheels, strong pull back.
User Tips
- Compatibility: This building block set is compatible with Lego blocks, allowing for expanded creative possibilities and integration with existing collections.
- Collaborative Play: Building is a wonderful activity to enjoy with family or friends. It promotes teamwork, communication, and shared accomplishment.
- Sorting Parts: Before starting assembly, sort the parts into a multi-compartment tray or separate piles. This will significantly speed up the building process and reduce frustration.
Frequently Asked Questions (FAQ)
- Q: What category does this product fall under?
A: It falls under the category of self-locking bricks, specifically small building blocks. - Q: What are its distinctive features?
A: Its distinctive feature is its compatibility with Lego blocks, along with its pull-back function and detailed design.
Warranty and Support
We are committed to your satisfaction. If you are not happy with your purchase, we offer a 3-month 100% Money-Back Guarantee.
For detailed step-by-step instructions and diagrams, please refer to the official user manual PDF available at: User Manual (PDF).
If you have any questions, concerns, or require assistance with missing parts, please contact customer support through the seller's platform.