Introduction
Thank you for purchasing the Kotobukiya Armored Core AC004 MIRAGE YC07-CRONUS VIXEN Ver. Action Figure Assembly Model Kit. This model kit allows you to construct a highly detailed and articulated representation of the MIRAGE YC07-CRONUS VIXEN Ver. from the Armored Core series. This manual provides essential information for assembly, operation, maintenance, and specifications to ensure a rewarding building and display experience.
Safety Warnings
- WARNING: Keep Away from fire. This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
- Adult supervision is recommended during assembly.
- Exercise caution when handling sharp tools (e.g., hobby knives, nippers) during assembly.
- Do not ingest any parts or materials.
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Assembly Instructions
This model is an assembly kit. Please follow the detailed instructions provided in the original packaging. The kit includes various parts that need to be carefully detached from their runners and assembled according to the diagrams.
Recommended Tools (Not Included):
- Plastic nippers or side cutters for detaching parts.
- Hobby knife for cleaning nubs.
- Tweezers for handling small parts.
- Plastic cement (optional, for stronger bonds).
Assembly Steps:
- Carefully open the box and identify all runners and the instruction booklet.
- Refer to the parts list to ensure all components are present.
- Follow the step-by-step diagrams in the instruction booklet. Detach parts from runners using nippers, ensuring clean cuts.
- Assemble sections as indicated, paying close attention to part orientation and connection points.
- Once all sections are complete, connect them to form the final model.
Operation and Display
The MIRAGE YC07-CRONUS VIXEN Ver. is a highly articulated action figure designed for dynamic posing and display. It is not remote-controlled.
Posing Your Model:
- The model features multiple points of articulation in its joints (shoulders, elbows, hips, knees, etc.).
- Gently manipulate the joints to achieve desired poses. Avoid excessive force to prevent breakage.
- Weapons and accessories can be attached to designated hardpoints or held in the model's hands.
Display:
- Display your finished model on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity.
- Consider using a display stand (if available or purchased separately) for more dynamic aerial poses.
Care and Maintenance
- Cleaning: Dust the model regularly with a soft brush or a can of compressed air. For stubborn dirt, gently wipe with a slightly damp cloth, then immediately dry. Avoid harsh chemicals or abrasive cleaners.
- Storage: If storing the model, disassemble delicate parts if necessary and store them in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
- Joint Care: If joints become loose over time, a thin layer of clear nail polish or a specialized joint-tightening solution can be applied to the ball joints and allowed to dry to restore friction.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Parts do not fit together | Excess plastic (nubs) remaining from the runner; incorrect part orientation. | Carefully trim any remaining nubs with a hobby knife. Double-check the instruction diagrams for correct part orientation. |
| Joints are too loose | Normal wear and tear; manufacturing tolerance. | Apply a thin coat of clear nail polish or a specialized joint-tightening solution to the ball joint and let it dry completely before reassembling. |
| Missing parts | Packaging error. | Refer to the 'Warranty and Support' section to contact customer service. |
Specifications
| Attribute | Detail |
|---|---|
| Model Name | MIRAGE YC07-CRONUS VIXEN Ver. |
| Brand | Kotobukiya |
| ACG Character | MIRAGE YC07 |
| Material | PVC |
| Scale | 1/72 |
| Dimensions | Approximately 15cm (height) |
| Item Type | Model (Assembly Kit) |
| Completion Degree | Finished Goods (after assembly) |
| Remote Control | No |
| Origin | Japan |
| Recommended Age | 14+ years, 18+ years |
User Tips
- Patience is Key: Model assembly requires patience and attention to detail. Do not rush the process.
- Read Instructions Thoroughly: Before starting, read through the entire instruction manual to understand the assembly flow.
- Organize Parts: Keep parts organized by runner number to avoid confusion.
- Test Fit: Always test fit parts before applying glue (if using) or firmly snapping them together.
- Customization: For advanced builders, consider painting or panel lining the model to enhance its visual appeal.
Warranty and Support
This product is a genuine original imported item. For any issues regarding missing parts, manufacturing defects, or assembly difficulties not covered in this manual, please contact the retailer or manufacturer's customer support.
Product Authenticity:
This product is certified original. We are committed to providing authentic products.
Security & Privacy:
Your personal details are protected and kept secure. We do not share your personal details with any third parties without your consent.
