Sunster 8KW Diesel Air Heater

Contents

Sunster 8KW Diesel Air Heater User Manual

Model: 8KW Diesel Air Heater (S-A2200BS, S-A2302B)

Brand: Sunster

1. Introduction

The Sunster 8KW Diesel Air Heater is designed to provide efficient heating for various applications, including motorhomes, RVs, boats, cabins, and more. It helps to prevent damage caused by sudden temperature drops, improves interior warmth, and preheats engine coolant to reduce wear at low temperatures. This unit is effective for defrosting vehicle interiors and windows.

With a powerful 8KW heating capacity and versatile DC 12V/24V and AC 110-240V compatibility, this heater is suitable for spaces ranging from 215-269 sq. ft. (20-25 m²), rapidly warming your environment within 10 minutes thanks to its high-performance aluminum heat exchanger.

2. Safety Warnings

  • **Exhaust Pipe Safety:** When the heater is operating, the exhaust pipe becomes extremely hot. Ensure it is installed with sufficient distance from any oil pipes or flammable materials. The exhaust pipe must always lead to the outside of the enclosed space.
  • **Flammable Materials:** Keep the area around the outdoor exhaust pipe clear of any flammable materials. Maintain an empty space around the exhaust outlet.
  • **Power Off Procedure:** Do not force power off the unit midway through operation. The machine is designed to automatically dissipate heat for approximately half an hour after being turned off. Interrupting this process can prevent proper heat discharge and potentially damage the unit.
  • **Ventilation:** Ensure adequate ventilation when operating the heater, especially if using it in an enclosed space.
  • **Professional Installation:** Professional installation is recommended to ensure correct setup and safe operation.
  • **Children and Pets:** Keep the heater out of reach of children and pets.

3. Package Contents

Please check the box contents upon receipt to ensure all items are present and undamaged:

  • 1 x Air Diesel Heater
  • 1 x Remote Control
  • 1 x Air Filter
  • 1 x User Manual
  • 1 x Intake Pipe
  • 1 x Exhaust Pipe
  • 1 x Air Outlet Pipe
  • 1 x Battery Power Cord
  • 1 x Fixture Accessories Set
  • 1 x AC110-240V Power Adapter (EU/UK/US PLUG)
  • 1 x Silencer
  • 1 x Heater Recirculation Kit (New accessory)
  • 1 x Retractable Base (New accessory)
Diagram showing all components included in the Sunster 8KW Diesel Air Heater package, including the main unit, remote, air filter, user manual, various pipes, power cords, accessories, and silencer.
Figure 3.1: All components included in the package.

4. Specifications

AttributeValue
Brand NameSunster
Heater Power8KW
Fuel TypeDiesel
VoltageDC 12V&24V; AC 110-240V
AC-DC Power AdapterAC110-240V 50-60Hz
Car Air Heater TypeHeating & Ventilation mode
BTU Coverage215-269ft² / 20-25 m²
Built-in Fuel Tank5L / 1.3gal
Fuel Consumption0.11-0.45 (L/H)
Adjustable Temperature Range46.4°F - 96.8°F (8°C -36°C)
Radiator Working Temperature-40℃~+20℃ / -40℉~+68℉
Oil Pump Operating Temperature-40℃~+20℃ / -40℉~+68℉
Control MethodLCD + Remote Control + Bluetooth App
Temperature Control ConversionGear / Temperature
Pump Oil Volume SettingAutomatic pump oil
Special Feature 1Efficient internal circulation system
Special Feature 2With 14cm base bracket
FeaturesDisplay altitude, Automatic Start & Stop (constant temperature), Temperature compensation, Ventilation Mode, Turbo Heat Mode, 24H Timing Function, Ultra Quiet Mode (< 35db)
Item Weight9kg
Item Dimensions (LxWxH)38cm x 24.3cm x 30cm
MaterialAluminum + Plastic
CertificationsRoHS, FCC, CE
Remote Control Distance164 ft / 50 m
Complete Combustion Rate100%
Noise Level< 35db
Startup Current13A
Rated Current3A
Air Outlet Pipe Diameter76mm (Stretchable)
Intake Pipe Diameter25mm
Exhaust Pipe Diameter25mm

5. Installation and Setup

Follow these steps for proper installation of your Sunster Diesel Air Heater. Refer to the installation video for visual guidance.

Video 5.1: Horizontal All-in-One Installation Guide. This video demonstrates the unboxing, assembly, and initial setup of the diesel air heater.

Installation Steps:

  1. **Unpack and Inspect:** Open the box and carefully check all contents against the package list to ensure everything is present and undamaged.
  2. **Install Base Clips:** Attach the provided base clips to the bottom of the heater unit.
  3. **Elevate the Unit:** Place the heater on wood blocks or similar objects to elevate it, providing clearance for pipe connections.
  4. **Secure the Machine:** Screw the heater unit firmly in place using the provided hardware.
  5. **Install Exhaust Pipe:** Connect the exhaust pipe to the designated outlet. Ensure the exhaust pipe is positioned away from the oil pipe to prevent heat damage. When the machine is working, the exhaust pipe will be particularly hot, and it needs to leave a certain distance from the oil pipe.
  6. **Install Intake Pipe and Air Filter:** Attach the intake pipe and air filter to the corresponding inlet. Secure them with clamps.
  7. **Install Outlet Duct:** Connect the air outlet duct to the heater's hot air outlet. Secure it with a clamp.
  8. **Route Exhaust Outside:** It is crucial that the exhaust pipe leads directly to the outside of any enclosed space.
  9. **Clear Flammable Materials:** Ensure there are no flammable materials around the outdoor exhaust pipe. Keep the nearby area empty.
  10. **Install Silencer:** Attach the silencer to the end of the exhaust pipe and secure it in place.
  11. **Connect Power Supply:** Link the power supply: red wire to positive (+) and black wire to negative (-).
  12. **Add Fuel and Start:** Fill the fuel tank with diesel fuel and initiate the startup process.

Important Notes:

  • The machine will automatically dissipate heat for half an hour after being turned off. Do not force power off midway, otherwise the heat in the machine cannot be discharged.
  • The unit is equipped with a 140mm base bracket for easier installation and to prevent exhaust gas blockages.
  • The heater features an efficient internal circulation system with an air hot pipe on either end, allowing warm air to be drawn in, reheated, and blown out, increasing efficiency and reducing diesel consumption.
Diagram showing the rapid assembly of the heater with bottom bracket, internal circulation system kit, silencer, and flexible air outlet pipe.
Figure 5.2: Rapid Assembly for Safer Heating.
Image illustrating the efficient interior circulation system of the heater, showing rapid heat and retention, energy saving, and blocked external contaminants.
Figure 5.3: Efficient Interior Circulation System.
Exploded view diagram of the heater's internal components, including air inlet, air fan, flame retardant impeller, combustion chamber, ignition plug, safety plug, heating zone, and air outlet.
Figure 5.4: Internal Structure Diagram.

6. Operation

The Sunster Diesel Air Heater offers multiple control methods: LCD switch, remote control, and Bluetooth App.

6.1 LCD Switch Operation (S-A2200BS)

Image showing the intelligent LCD panel and remote control for the heater, highlighting features like 24-hour timing, turbo heat, auto climate control, ventilation mode, and Bluetooth app control.
Figure 6.1: LCD Panel and Remote Control (S-A2200BS).

Controls:

  • **Power Button:** Press to turn on/off the heater.
  • **Gear/Temperature Adjustment Key (▲):** Increases gear/temperature.
  • **Gear/Temperature Adjustment Key (▼):** Decreases gear/temperature.
  • **Mode Switch/Setting Key (M):** Switches between gear mode and temperature control mode.

Working Modes:

  • **Gear Mode:** Adjust gear position from 1 to 10.
  • **Temperature Control Mode:** Sets a target temperature (8-36°C). The system dynamically adjusts heating to maintain the set temperature.
  • **Fault Display:** Shows error codes if a malfunction occurs.

6.2 LCD Switch Operation (S-A2302B)

Operation Modes:

  • **Ventilation Mode:** Fan operates without heating. Wind speed adjustable from 1 to 10 gears.
  • **Gear Mode:** Heats according to the set gear (1-10 gears).
  • **Strong Heating Mode:** Heater runs at maximum output for up to 2 hours.
  • **Temperature Control Mode:** Automatically adjusts heating based on the difference between set and ambient temperatures. Lowest operating gear is 1, continuous operation. Temperature setting range: 8-36°C.
  • **Constant Temperature Mode:** Similar to temperature control mode. Heating stops when ambient temperature is 2°C higher than set, enters standby. Resumes heating when ambient temperature is 2°C lower than set.

Operation Method:

  • **Power On/Off:** Press the power button. LCD displays current status.
  • **Mode Switch:** In running state, press the knob to switch modes.
  • **Parameter Adjustment:** Rotate the knob to adjust settings (gear or temperature).
  • **View Carbon Monoxide (CO) Value:** Press the knob twice to view the current CO value. Press power button to exit. (Requires A2422 CO remote control).

Setting Mode:

In the running state, press and hold the power button for 3 seconds to enter setting mode. Rotate the knob to select setting items (F0-FC). Press the knob to enter, adjust value, press again to save, and press power button to exit.

  • **F0: Current Time Setting**
  • **F1: Timing Start Time Setting**
  • **F2: Timing Start After Running Time Setting**
  • **F3: Timing Function On/Off Setting**
  • **F4: Voice Broadcast Voice Setting (Language Switching):** Press and hold 'M' for 3s to switch language (RU for Russian, EN for English, GE for German).
  • **F5: Ambient Temperature Compensation Setting:** Adjust from -9℃ to 9℃ to correct temperature deviations.
  • **F6: Fuel Tank Oil Level Setting**
  • **F7: Fuel Pump Type Setting**
  • **F8: Constant Temperature Mode Function Setting**
  • **F9: Temperature Unit Switching Setting:** Switch between Fahrenheit and Celsius.
  • **FA: Backlight Brightness Level Setting:** Adjust from 0-100. 0 for off, 100 for no decrease.
  • **Fb: Full Tank Icon Setting:** Refill the tank icon when oil level changes.
  • **FC: Carbon Monoxide Alarm Value Setting:** Adjust from 0-500 (0 is off). Alarms when CO reaches set value, shuts down at 500. (Requires A2422 CO remote control).

6.3 Remote Control Operation

Remote Control Quick Pairing:

When the device is powered on, press the power button for 3 seconds. The screen will display 'P - 0 1'. Press any button on the remote control to successfully match. After matching, it will automatically return to the running interface.

6.4 Bluetooth App Control

Image showing a smartphone with the Sunster app interface, demonstrating timing, language settings, gear settings, automatic start & stop, and blow mode controls.
Figure 6.2: Bluetooth App Control Interface.

Downloading the App:

  • **Android:** Search 'Sunster' in Google Play or scan the QR code.
  • **iOS:** Search 'Sunster' in the App Store or scan the QR code.

Bluetooth Matching:

Switch to engineering mode 009 on the heater's LCD. The interface will display "4 is the Bluetooth name". Open the 'Sunster Neo' app on your smartphone, search for available devices, find the Bluetooth name corresponding to your heater, and click 'Match'. Once successful, the heater will automatically return to the running interface.

The app allows you to easily adjust settings, create heating plans, and monitor performance from up to 98 feet (30 meters) away.

6.5 Forced Oil Pumping

When the heater is installed for the first time or if the fuel line is not completely filled, use forced oil pumping to quickly prime the system.

Procedure:

  1. Disconnect the switch power supply and wait for more than 10 seconds.
  2. Turn on the power.
  3. After the LCD screen display goes out, press and hold the knob for about 5 seconds to enter the forced oil pumping mode.
  4. The oil pump will operate at a higher frequency. The LCD screen will start counting down from 300 seconds.
  5. Once the countdown ends, the forced oil pumping mode exits automatically. You can also press the power button to exit manually.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your Sunster Diesel Air Heater.

  • **Air Filter:** Regularly inspect and clean the air filter to ensure proper airflow and prevent dust buildup.
  • **Exhaust System:** Periodically check the exhaust pipe and silencer for any blockages or damage. Ensure the exhaust path remains clear and leads outside.
  • **Fuel System:** Inspect fuel lines for any leaks or blockages. Ensure the fuel tank is adequately filled.
  • **General Cleaning:** Keep the exterior of the heater unit clean and free from debris.
  • **Storage:** If storing the heater for an extended period, ensure the fuel tank is empty and the unit is clean and dry.

8. Troubleshooting (E-Code Display)

The heater's LCD display may show error codes (E-codes) to indicate specific issues. Refer to the table below for common E-codes and their solutions.

Error CodeType of FaultSolution
E01Supply Voltage OverrunCheck the battery output voltage: 9-16V for 12V heater, 18-30V for 24V heater.
E03Ignition Unit FaultCheck the ignition plug connection. Replace if disconnected or faulty.
E04Pulse Pump FaultCheck the pump plug connection and main wiring harness. Replace if disconnected or faulty.
E05OverheatingCheck if the air inlet and outlet are blocked.
E06Fan FaultCheck the fan plug connection. Replace if disconnected or faulty.
E07Air Intake Sensor AbnormalityMainboard failure; replace the mainboard.
E08Lack of FuelCheck if the fuel tank is empty and add fuel.
E09Overheat Sensor FaultCheck the sensor plug connection. Replace if disconnected or faulty.
E10Startup FailureCheck if the fuel tank is empty or if the fuel pipe is blocked.
E11Carbon Monoxide Exceeds Standard (Connect A2422)If CO concentration exceeds standard, open windows for ventilation and evacuate the area immediately.

9. User Tips

  • **Changing Temperature Units:** To switch between Fahrenheit and Celsius, navigate to the F9 setting in the setting mode (refer to Section 6.2, Setting Mode).
  • **Outlet Pipe Size:** The air outlet pipe has a diameter of 76mm and is stretchable.
  • **Heater Dimensions:** The overall dimensions of the heater unit are approximately 38cm (length) x 24.3cm (width) x 30cm (height).

10. Warranty and Support

Sunster is the factory's own brand, committed to providing quality products and excellent customer service. Our products are certified by CE, WEE, FCC, EAC, UKCA, and other authoritative organizations.

We offer a 24-hour online after-sales service. If you encounter any problems or have questions regarding your Sunster Diesel Air Heater, please contact our customer support team:

  • **Email:** cs@sunster.tech
  • For business inquiries, please contact: sunster@sunster.tech

© 2023 Sunster. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.