1. Introduction
Thank you for choosing the RoadTop Wireless Carplay Mirror Link Ai Box. This device is designed to seamlessly integrate Apple CarPlay, Android Auto, AirPlay, and Autolink functionalities into your compatible Land Rover and Jaguar vehicles, enhancing your driving experience with modern connectivity and entertainment options.
This manual provides detailed instructions for installation, operation, and troubleshooting to ensure you get the most out of your new device.

Main product image showing the CarPlay interface in a car and the device.
2. Safety Information
- Always ensure the vehicle is parked safely before attempting any installation or configuration.
- Professional installation is highly recommended to avoid damage to your vehicle's electrical system or the device.
- Do not attempt to disassemble or modify the device. This may void your warranty and cause damage.
- Keep the device away from water, moisture, and extreme temperatures.
3. Package Contents
Please check the box for the following items:

Product Accessories List for Bosch and Harman systems.
| Item | Description |
|---|---|
| Main Decoder Box | The core unit for CarPlay/Android Auto integration. |
| Power Cable | For connecting the decoder box to the vehicle's power supply. |
| LVDS Cable | For video signal transmission to the car's display. |
| Camera/USB Cable | For connecting external cameras and USB devices. |
| WiFi Antenna | For wireless connectivity. |
4. Compatibility
This RoadTop Ai Box is compatible with specific Land Rover and Jaguar models from 2012 to 2018, equipped with either Bosch or Harman head units. Please verify your vehicle's system and screen type before installation.

Compatible Model List and interface examples.
| System | Model | Interface Notes |
|---|---|---|
| 2012-2016 Bosch | Grand Evoque / Discovery / Discovery Sport / Range Rover / Range Rover Sport / Jaguar F-TYPE / Jaguar XF / Jaguar XE | Time displayed on the right. Pay attention to the style of the old host system. |
| 2016-2018 Harman | Grand Evoque / Discovery / Discovery Sport / Range Rover / Range Rover Sport / Jaguar F-TYPE / Jaguar XF / Jaguar XE | 8-inch screen: Time displayed on the middle. 10.25-inch screen: Time displayed on the middle. |
5. Setup and Installation
This section outlines the general installation steps and initial setup. For detailed wiring, please refer to the full PDF user manual available at User manual (PDF).
5.1 Physical Installation
- Connect the WiFi Antenna: Ensure the WiFi antenna is securely connected to the decoder box. Avoid placing the WiFi antenna close to metal objects, as this can interfere with the signal.
- Connect Cables: Connect the Power cable, LVDS cable, and Camera/USB cable to the appropriate ports on the decoder box and your vehicle's head unit. Refer to the detailed wiring diagram in the PDF manual for precise connections.
- Mount the Decoder Box: Securely mount the decoder box in a suitable location within your vehicle, ensuring it does not obstruct any moving parts or interfere with vehicle operation.

Example of Bosch Headunit (2015-2016) and car display.
5.2 Initial Setup and Configuration
5.2.1 Switching Between OEM System and CarPlay System
After cable connection, you can switch between your original OEM system and the CarPlay system by long-pressing a specific button on your car's control interface:
| Car Model | System Switch Button |
|---|---|
| For BMW | Long press 3 seconds "MENU" button from iDrive |
| For Mercedes NTG4.5/4.7 | Long press 3 seconds "C" button from console joystick |
| For Mercedes NTG5.0 (A-Class, B-Class, CLA, GLA) | Long press 3 seconds "C" button from console joystick |
| For Mercedes NTG5.0 (GLC & C-Class W205) | Long press "★" button for 3 seconds from center console handwriting mouse |
| For Audi | Long press 3 seconds "Media" or "NAV" button from MMI control or steering wheel control |
| For Lexus | Long press 3 seconds "MENU" button from knob control |
| For Lexus with touchpad | Long press the touchpad 3 seconds |
| For other cars | View the Cable Connection User Manual for detail. |
5.2.2 WiFi Channel Setting
From the CarPlay Decoder main interface, click the "Setup" button. Navigate to the WiFi settings and set the WiFi Channel according to your country. Note: You need to reboot the CarPlay decoder box after changing the WiFi channel.
| Country/Region | Recommended WiFi Channel |
|---|---|
| United States | 6 |
| Europe and other countries | 36 |
| China | 149 |
6. Operating Instructions
The RoadTop Ai Box supports various connectivity options. Before connecting any function, if your phone has previously connected to AirPlay, Android Auto, or Autolink, please set the desired function (CarPlay, Android Auto, etc.) as the priority application in the decoder box settings.

Overview of 6 Major Advantages.
6.1 Wireless Apple CarPlay Connection
Follow these 4 simple steps to connect wireless CarPlay:
Video demonstrating the 4 steps to connect wireless CarPlay.
- Turn on WiFi: On your iPhone, go to Settings and turn on Wi-Fi.
- Turn on Bluetooth: On your iPhone, go to Settings and turn on Bluetooth. Search for the decoder box's Bluetooth name (e.g., "Carplay833d00") and pair with it.
- Pair Bluetooth and Allow Sync: A Bluetooth Pairing Request will appear. Confirm the code displayed on your phone matches the one on the car screen. Then, allow contacts and favorites sync if prompted.
- Choose "Use CarPlay": After successful pairing, a prompt will ask if you want to "Use CarPlay with 'Car'". Select "Use CarPlay".

Wireless CarPlay and Android Auto interfaces.
6.2 Wired Apple CarPlay Connection
Connect your iPhone to the CarPlay decoder box using a USB cable.
6.3 Android Auto Connection
Before connecting, ensure the Android Auto application is installed on your Android phone.
- Wireless Android Auto:
- Turn on Wi-Fi on your Android phone.
- Turn on Bluetooth on your Android phone, search for the decoder box's Bluetooth name (e.g., "CAR******") and pair with it.
- Start to use Android Auto function.
- Wired Android Auto: Connect your Android phone to the CarPlay decoder box using a USB cable.
6.4 AirPlay Connection (Screen Mirroring)
- Turn on Wi-Fi on your mobile phone and connect to the decoder box's Wi-Fi network. The Wi-Fi name is typically "Car******" and the password is "88888888".
- On your iPhone, open the Control Center, tap "Screen Mirroring" (or AirPlay), and select the decoder box's device name to start mirroring.

AirPlay and Autolink screen mirroring functionality.
6.5 Wired Autolink Connection
Before connecting, ensure the Autolink application is installed on your Android phone.
- Connect your Android phone to the CarPlay decoder box using a USB cable.
- The system will prompt "Autolink is waiting for device to connect. Please connect to your Android device via USB."
6.6 Voice Assistant Function
The voice assistant allows you to control common functions using voice commands, eliminating the need for physical button presses.
- Enable Voice Assistant: Go to the "Setup" menu, then "Voice Assistant". Set "Assistant Enable" and "Voice Enable" to "on".
- Using Voice Commands: The activation word is "Hi Yo". Followed by command words like "Last song", "Return to car", "Enter Decoder", "Open setup", etc.
- Learning Custom Commands: In the "Voice Assistant" menu, select "Learn List" to teach the system custom command words. Speak your desired command word into the microphone, then repeat it. If successful, the new command will replace the old one.
7. Troubleshooting
- No display/System not switching: Ensure all cables are securely connected. Verify that you are using the correct long-press button for your specific car model to switch between OEM and CarPlay systems (refer to section 5.2.1).
- Wireless connection issues (CarPlay/Android Auto/AirPlay): Check that Wi-Fi and Bluetooth are enabled on your phone. Ensure your phone is paired correctly via Bluetooth (for CarPlay/Android Auto) or connected to the decoder's Wi-Fi (for AirPlay). Verify the WiFi channel setting in the decoder box matches your region (section 5.2.2) and reboot the box if changed.
- Wired connection issues: Ensure the USB cable is properly connected and functioning. For Android Auto/Autolink, confirm the respective apps are installed on your phone.
- Voice Assistant not responding: Check that "Assistant Enable" and "Voice Enable" are set to "on" in the Voice Assistant settings. Ensure you are using the correct activation word ("Hi Yo") and clear command words.
- Compatibility concerns: Double-check your vehicle's year, model, and head unit type (Bosch or Harman) against the compatibility list in section 4. If unsure, refer to the full PDF manual or contact support.
8. Specifications
| Feature | Specification |
|---|---|
| Warranty | 1 year |
| Operating System | Linux |
| Voltage | 12 V |
| Item Weight | 1.2 kg |
| Item Size | 22.5 x 17 x 11 cm |
| Output Type | Colored |
| Digital Media Format | CD |
| OSD Language | Chinese (Simplified), Chinese (Traditional), German, French, English |
| Display Size | 2.5" (Note: This refers to the device's internal display, not the car's screen) |
| Origin | Mainland China |
| Certification | CE |
| Touch Screen | No |
| Built-in Screen | No |
| Din | One Din |
9. User Tips
- Verify Compatibility: Before purchasing or installing, carefully check the compatibility list (Section 4) to ensure your specific Land Rover or Jaguar model and year, along with its head unit type (Bosch or Harman), are supported. This is crucial for a successful installation.
- Professional Installation: Given the complexity of integrating with vehicle electronics, professional installation is highly recommended. If you choose to self-install, thoroughly review the detailed PDF manual and any available installation videos.
- Check Connections: If you encounter any issues, the first step should always be to re-check all cable connections to ensure they are secure and correctly seated.
- Software Updates: Periodically check for software updates for the CarPlay decoder box. Updates can improve performance, add new features, and resolve bugs. (Refer to the PDF manual for instructions on checking software version and updates).
10. Warranty and Support
The RoadTop Wireless Carplay Mirror Link Ai Box comes with a 1-year warranty. For any support inquiries, technical assistance, or warranty claims, please contact us via your purchase platform, email, or WhatsApp.
To help us provide efficient support, please be prepared to provide the following information:
- Your order ID
- The exact car model
- The year of the car
- Screen size of the car
- The toggle switch setup (if applicable)
- Pictures about the LVDS cable connection
- The software version (found in the CarPlay decoder menu under "Setting" > "System Version")
11. Frequently Asked Questions (FAQ)
- Q: How do I install the device?
- A: Detailed installation instructions, including wiring diagrams, are provided in the full PDF user manual. Professional installation is highly recommended due to the complexity of vehicle electronics. You can find the PDF manual link in Section 5.1.
- Q: Is this compatible with a 2012 Evoque, Bosch system, without a NAV button?
- A: Yes, the device is compatible with 2012-2016 Bosch systems for Evoque models. The system switching button may vary; for Bosch systems, it could be the 'MENU', 'C', or '★' button. Please refer to Section 5.2.1 for specific button instructions for your car model.
- Q: What do the dip switches do?
- A: The provided documentation does not explicitly detail the function of dip switches. For specific information regarding dip switch settings, please consult the comprehensive PDF user manual or contact RoadTop customer support.
- Q: Is there an installation video available?
- A: A video demonstrating the 4-step wireless CarPlay connection process is available in Section 6.1. For full physical installation, please refer to the detailed PDF user manual or contact support for further guidance.