1. Introduction
The Dooya DD2702H is a 15-channel bidirectional remote controller designed for use with Dooya smart home electric curtain motors. This remote allows for precise control of various window coverings such as roller, zebra, and honeycomb blinds. Its bidirectional communication capability enables feedback from compatible motors, enhancing control and reliability.

2. Setup
2.1. Compatibility
Important: The DD2702H remote controller is designed to work exclusively with bidirectional Dooya motors. Ensure your motor is a bidirectional model for proper functionality. It is compatible with tubular motors designed for 38mm alloy tubes, such as the Dooya DM28LEU.

2.2. Battery Installation
The DD2702H remote controller requires one CR2450 3V battery.
- Locate the battery compartment on the back of the remote controller.
- Open the battery compartment cover.
- Insert the CR2450 battery, ensuring the positive (+) terminal faces upwards as indicated inside the compartment.
- Close the battery compartment cover securely.
2.3. Pairing with Motor
Specific pairing instructions may vary slightly depending on the motor model. Generally, the pairing process involves a sequence of button presses on both the motor and the remote controller. Please refer to the instruction manual provided with your Dooya bidirectional motor for detailed pairing procedures. The DD2702H remote supports up to 15 channels, allowing you to control individual or groups of motors.
2.4. Optional Smart Home Integration
For smart home integration, a compatible WiFi bridge such as the Dooya Connector Mini Bridge DD1554 may be used. This device allows your bidirectional motors to be controlled via a smart hub or application.

3. Operating the Remote Controller
The DD2702H remote controller features intuitive buttons for controlling your motorized blinds:
- Channel Selection: Use the channel buttons (typically numbered or indicated by arrows) to select the desired motor or group of motors (up to 15 channels). The display on the remote will show the currently selected channel.
- Up Button (∧): Press to raise the blinds.
- Down Button (∨): Press to lower the blinds.
- Stop Button (–): Press to stop the blinds at any desired position.
- Tilt Buttons (< / >): If your blinds support tilt functionality (e.g., venetian blinds), these buttons allow for adjusting the slat angle.
The bidirectional communication allows the remote to receive status updates from the motor, such as current position or battery level (if supported by the motor and displayed on the remote).
4. Maintenance
4.1. Battery Replacement
When the remote's display dims or its response becomes sluggish, it's time to replace the battery. Follow the battery installation steps in Section 2.2.
4.2. Cleaning
To clean the remote controller, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the device. Keep the remote dry and away from direct sunlight or extreme temperatures.
5. Troubleshooting
- Remote not responding:
- Check if the battery is correctly installed and has sufficient charge. Replace if necessary.
- Ensure the remote is within range of the motor and there are no significant obstructions.
- Verify that the remote is paired correctly with the motor. Refer to your motor's manual for re-pairing instructions.
- Motor not responding to remote:
- Check the power supply to the motor.
- Consult the motor's instruction manual for specific troubleshooting steps related to the motor itself.
- Ensure the correct channel is selected on the remote.
- Short operating range:
- Replace the remote's battery.
- Minimize obstructions between the remote and the motor.
- Avoid sources of radio interference (e.g., other wireless devices).
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | DD2702H |
| Channels | 15 |
| Battery Type | 3V, CR2450 |
| Radio Frequency | 433.92MHz |
| Working Temperature | -10°C to +50°C |
| Dimensions (L x W x H) | 130 x 45 x 11.5 mm |
| Origin | Mainland China |

7. User Tips
- Always ensure a clear line of sight between the remote and the motor for optimal signal transmission.
- Keep the remote controller away from moisture and extreme temperatures to prolong its lifespan.
- If controlling multiple blinds, consider labeling your channels for easier identification.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your product retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.