VWVIVIDWORLD GPS RC Fishing Bait Boat Instruction Manual

1. Introduction

Thank you for choosing the VWVIVIDWORLD GPS RC Fishing Bait Boat. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new fishing bait boat. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

Figure 1: VWVIVIDWORLD GPS RC Fishing Bait Boat with remote control and batteries.

2. Key Features

• GPS Global Positioning System: Features BDS+GPS dual satellite module for precise positioning, automatic navigation between up to 40 set positioning points, automatic cruise, and one-click automatic return.
• Long Endurance Battery: Equipped with large-capacity rechargeable batteries (5200mAh, 12000mAh, 17200mAh, 24000mAh options) for extended operating times. Includes a low power alarm.
• Triple Bin Design: Independent control of three bait bins with a total load capacity of up to 2kg.
• Anti-Unhooking Design: Rear bin includes a hook buckle design to easily deploy hooks and lines, preventing winding.
• Dual Motors: Strong dual-power motor system for silent operation and effective navigation against wind and waves.
• Night Light & Self-Illuminating: High-brightness LED front light and turn signals for improved night visibility. The boat's material can absorb light during the day and self-illuminate (fluorescence effect) in dark conditions.
• Remote Control Range: Up to 500 meters control distance with stable connection.
• Durable Construction: Made of high-quality ABS material, wear and impact resistant, with a fully enclosed cabin and streamlined fuselage.

Figure 2: Overview of the bait boat's features in use.

3. Specifications

Note: Lowering the ambient temperature will shorten the battery use time.

Figure 3: Detailed specifications of the bait boat.

4. Package Contents

The package includes the following items:

• 1 x Fishing Bait Boat
• 1 x Remote Control
• 1 x USB Cable
• 1 x Boat Battery (Capacity varies by selection)
• 2 x Remote Control Rod
• 1 x Screw
• 2 x Propeller
• 1 x User Manual

Note: If you purchased a two-battery set, the second battery is a spare and cannot be used simultaneously with the first.

Figure 4: Package contents for the 5200mAh version.

5. Setup Guide

5.1. Battery Installation & Charging

1. Boat Battery: Insert the boat battery into its designated compartment. Ensure it is securely connected.
2. Remote Control Battery: Open the battery compartment on the remote control and insert 4 AA batteries (not included), observing correct polarity.
3. Charging: Connect the boat battery to the USB charging cable and plug it into a suitable USB power source. The charging time is approximately 6 hours.

5.2. Antenna Installation

Attach the antenna to the designated port on both the bait boat and the remote control. Ensure they are firmly screwed in for optimal signal reception.

5.3. Optional Camera/Monitor Setup

If your package includes a camera and monitor, follow these steps:

1. Attach the display bracket to the monitor.
2. Connect the camera to the monitor using the provided data cable.
3. Use the base floating ball to position the camera as desired.
4. Charge the monitor using its charging cable. The monitor supports power bank charging for extended use.

Figure 5: Accessories for optional camera/monitor setup.

Figure 6: Monitor, data cable, headphone cable, bracket, and camera set.

6. Operating Instructions

6.1. Remote Control Overview

Familiarize yourself with the remote control's layout and display:

Figure 7: Function Introduction for the boat and remote control.

• Display: Shows boat battery capacity, positioning points, compass, GPS status, boat light status, current page, distance, and boat direction.
• Control Sticks: Left and right control sticks for boat movement.
• Buttons: Pairing button, left/right/back silo buttons, lighting button, fixed-speed cruise, switch, delete button, page buttons, OK button, return/cancel button.

Video 1: Product demonstration of the bait boat's features.

6.2. Bait Loading

The boat features three independent bait bins. Open the bin covers, load your bait (up to 2kg total capacity), and close the covers. Each bin can be controlled independently using the remote control.

Figure 8: Triple bin design for bait loading.

6.3. Hook and Line Deployment

The rear bin is equipped with an anti-unhooking design. Easily place your hook and line into the designated buckle to prevent winding during deployment.

Figure 9: Rear hopper hook buckle design.

6.4. GPS Positioning and Navigation

The boat utilizes a Beidou/GPS dual satellite positioning system for advanced navigation:

1. Location Point Storage: The GPS icon is displayed before operation. Set a home point near the shore (e.g., '1' on page 0).
2. Setting Positioning Points: The boat can store up to 40 anchor points. Navigate the boat to a desired location, then press the OK button to save the positioning point. The screen will show the corresponding number (1, 2, 3, 4, etc.). You can scroll down for more pages.
3. Automatic Cruise: Use the fixed-speed cruise function for consistent movement.
4. Route Correction: The system automatically corrects the boat's route to maintain accuracy.

Figure 10: Fixed-Point Cruise and Location Point Storage Operation.

6.5. Night Operation

For night fishing, the boat is equipped with high-brightness LED front lights and turn signals. Additionally, the boat's material absorbs light during the day and emits fluorescence at night, enhancing visibility.

Figure 11: Night Light & Self-Illuminating features.

6.6. Automatic Return

The boat features an automatic return function. If the signal is lost or the boat exceeds the 500-meter range, it will automatically return to its starting point.

7. Maintenance

• Cleaning: After each use, especially in saltwater, rinse the boat thoroughly with fresh water to prevent rust on propellers and other accessories. Wipe dry with a soft cloth.
• Propeller Inspection: Regularly check the propellers for any debris, fishing lines, or damage. Clean or replace as necessary.
• Battery Care: Store batteries in a cool, dry place. Do not overcharge or completely discharge batteries. If storing for extended periods, charge to about 50-60%.
• Storage: Store the bait boat in a dry, shaded area away from direct sunlight and extreme temperatures.

8. Troubleshooting

• Boat not responding: Check remote control batteries and boat battery connection. Ensure the boat and remote are paired correctly.
• Short operating time: Ensure the boat battery is fully charged. Note that lower ambient temperatures can reduce battery life.
• Boat drifts off course: Verify GPS signal strength on the remote control. Ensure no obstructions are interfering with the signal.
• Lost signal: The boat is designed to automatically return if the signal is lost. Wait for the boat to return or manually retrieve it if safe to do so.
• Propellers not spinning: Check for debris wrapped around the propellers. Ensure the motors are free from obstruction.

9. User Tips

• When using the boat in saltwater, always rinse it thoroughly with fresh water after use to prevent corrosion on metal parts like propellers and motors.
• If you have a two-battery set, remember that only one battery can be used at a time; the other serves as a spare.
• Be aware that battery working time can be significantly reduced in colder temperatures. Plan your fishing trips accordingly.
• For optimal GPS performance, ensure a clear line of sight to the sky when setting positioning points.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.