dawndesslo G2

Contents

dawndesslo G2 Portable Bluetooth Speaker User Manual

Model: G2

Introduction

Thank you for choosing the dawndesslo G2 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read it carefully before use.

Two portable Bluetooth speakers, one red and one blue, showcasing the design.

Figure 1: dawndesslo G2 Portable Bluetooth Speakers (Red and Blue)

Package Contents

Please check the package for the following items:

  • 1 x dawndesslo G2 Portable Bluetooth Speaker
  • 1 x USB Charging Cable
Product List image showing one subwoofer Bluetooth speaker and one charging line.

Figure 2: Included items: Speaker and Charging Cable

Product Overview

The dawndesslo G2 speaker features a compact design with a frosted plastic body and a cloth mesh front cover. It is equipped with an internal magnetic horn for strong bass and crisp sound. Available colors include Red, Black, Gray, and Blue.

Four speakers in Red, Black, Gray, and Blue, illustrating available color options.

Figure 3: Available Color Options

Detail of the speaker's internal magnetic horn, describing strong bass and crisp sound.

Figure 4: Internal Magnetic Horn for Enhanced Audio

Image showing the frosted plastic and cloth mesh material of the speaker.

Figure 5: Frosted Plastic and Cloth Mesh Design

Controls and Ports

Familiarize yourself with the speaker's controls and ports:

Detailed diagram of the speaker's control panel and ports, labeling functions like volume, track control, play/pause, TF card mode, U Disk Mode, charging port, and FM radio antenna.

Figure 6: Top Panel Controls and Rear Ports

  • M (Mode) Key: Multi-Function key, likely for switching between modes (Bluetooth, TF card, U Disk, FM radio).
  • - (Minus) Key: Volume down / Previous song.
  • + (Plus) Key: Volume up / Next song.
  • > (Play/Pause) Key: Play/Pause audio / Answer/Hang up calls.
  • USB Port: For U Disk Mode playback.
  • TF Card Slot: For TF card mode playback.
  • DC 5V (Micro USB) Port: Charging port.
  • ON/OFF Switch: Power switch.
  • FM Radio Antenna: Integrated for FM radio reception.
Diagram illustrating the multiple interfaces on the rear of the speaker: USB, DC 5V charging, TF card slot, and On/Off switch.

Figure 7: Rear Interfaces

Setup

1. Charging the Speaker

Before first use, fully charge the speaker. Connect the provided USB charging cable to the DC 5V (Micro USB) port on the speaker and the other end to a USB power source (e.g., computer, USB wall adapter). The charging indicator light will show the charging status (specific indicator behavior not detailed, refer to product for visual cues).

2. Powering On/Off

Locate the ON/OFF switch on the rear of the speaker. Slide the switch to the "ON" position to power on the speaker. Slide it to the "OFF" position to power off.

Operating Instructions

1. Bluetooth Connection

  1. Ensure the speaker is powered on and in Bluetooth pairing mode (usually indicated by a flashing LED).
  2. On your mobile phone or other Bluetooth-enabled device, go to Bluetooth settings and search for available devices.
  3. Select "G2" (or similar name) from the list to connect.
  4. Once connected, the speaker will indicate a successful pairing (e.g., a sound prompt or solid LED).

2. Playing Music from TF Card / U Disk

  1. Insert a TF card (microSD card) or a USB flash drive into the respective slot on the speaker.
  2. The speaker should automatically detect the storage device and switch to TF card mode or U Disk mode. If not, press the "M" (Mode) key to cycle through modes until the correct mode is selected.
  3. Use the Play/Pause, Volume Up/Next, and Volume Down/Previous keys to control playback.

3. FM Radio Mode

  1. Power on the speaker.
  2. Press the "M" (Mode) key repeatedly until FM radio mode is activated.
  3. To auto-scan and save available stations, press and hold the Play/Pause button.
  4. Use the Volume Up/Next and Volume Down/Previous keys to switch between saved stations.

4. Call Answering

When connected via Bluetooth to a mobile phone, you can answer incoming calls by pressing the Play/Pause button. Press it again to hang up.

5. Volume Control and Track Navigation

  • Volume Up: Short press the "+" key.
  • Next Song: Long press the "+" key.
  • Volume Down: Short press the "-" key.
  • Previous Song: Long press the "-" key.

Maintenance

  • Keep the speaker dry. Do not expose it to water or excessive moisture.
  • Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Avoid extreme temperatures.
  • Store the speaker in a cool, dry place when not in use for extended periods.

Troubleshooting

ProblemPossible CauseSolution
Speaker does not turn on.Low battery or power switch is off.Charge the speaker fully. Ensure the ON/OFF switch is in the "ON" position.
Cannot connect via Bluetooth.Speaker not in pairing mode, device Bluetooth off, or too far away.Ensure speaker is in pairing mode. Turn Bluetooth on your device. Move device closer to speaker (within 10 meters). Forget previous pairings on your device and try again.
No sound from TF card/U Disk.Incorrect mode, corrupted files, or card/drive not inserted correctly.Press "M" key to select correct mode. Ensure audio files are compatible. Reinsert TF card/U Disk.
Poor FM radio reception.Weak signal.Move the speaker to a location with better signal. The speaker has an integrated antenna.
Low volume.Speaker volume or connected device volume is low.Increase volume using the "+" button on the speaker and on your connected device.

Specifications

Product Information table with specifications like Product Name, Brand, Material, Size, Usage, Packaging, List, and Style.

Figure 8: Product Information Table

FeatureDetail
Product NameFabric Portable outdoor Bluetooth speaker
Brand Namedawndesslo (youku sound G2)
Product MaterialABS + cloth mesh
Product Size117*79*39mm
UsageBluetooth, USB flash drive, TF card, FM Radio
Speaker TypePortable
CommunicationAUX, Wireless (Bluetooth)
Power SourceBattery, AC
Input Power(W)<25 W
Channels1
Number of Loudspeaker Enclosure1
Audio CrossoverTwo-Way
Sound ModeStandard Mode
Support APPYes
WaterproofNo
Voice ControlNo
Intelligent Personal AssistantNone
Inbox adaptorNo
High-concerned chemicalNone
OriginMainland China
Product Weight0.105 kg
Product Dimensions (L x W x H)11.7 x 7.9 x 3.9 cm

User Tips

  • Maximizing Volume: To achieve the maximum volume, ensure both the speaker's volume and the volume on your connected device are set to their highest levels.
  • No Specific App Needed: This speaker connects directly via standard Bluetooth pairing and does not require a dedicated mobile application for basic functionality.
  • Portability: The compact size and lightweight design make it ideal for outdoor sports and travel.

Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase receipt for any warranty claims.

Product Video

Video 1: Product demonstration showcasing the speaker's design and color options.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.