SUMRY HGX WIFI Module

Contents

SUMRY WIFI Module for HGX Touch Screen Solar Inverter User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SUMRY WIFI Module, specifically designed for use with SUMRY HGX series touch screen solar inverters. The WIFI Module enables remote monitoring and control of your solar inverter via a dedicated mobile application, enhancing convenience and system management.

NOTE: This WIFI module is only compatible with SUMRY HGX (black inverter, with touch screen) models. Please ensure compatibility before installation.

2. Safety Information

Please read and understand all safety instructions before installing or operating the WIFI Module. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Ensure the inverter is powered off and disconnected from all power sources before connecting the WIFI Module.
  • Do not expose the module to water, moisture, or extreme temperatures.
  • Do not attempt to disassemble or repair the module yourself. Contact qualified personnel for service.
  • Keep the module away from flammable materials.

3. Package Contents

Verify that all items are present in your package:

  • 1 x SUMRY WIFI Module
  • 1 x RJ45 Extension Cable (approximately 2 meters)
SUMRY WIFI Module and RJ45 cable for solar inverter connection.
Figure 1: SUMRY WIFI Module and RJ45 cable
SUMRY WIFI Module with a 2-meter long extension cable.
Figure 2: WIFI Module with 2-meter extension cable

4. Specifications

FeatureDescription
Model NumberDTU-WBS1-V001 (HGX Series)
ChipESP32C3
Power Supply12VDC
Cable Length2 meters
CompatibilitySUMRY HGX Touch Screen Solar Inverters
Smart DeviceYes
CertificationsCE, RoHS, WEEE
SUMRY HGX Series MPPT Solar Inverter with touch screen, showing specifications like 4500W, 24V, 230VAC, 150A max charge, 6500W max PV array, 450V max DC input, 50/60Hz frequency.
Figure 3: Compatible SUMRY HGX Series Inverter

5. Setup Guide

5.1. Electrical Connection

  1. Locate the communication interface (RJ45 port) on your HGX solar inverter.
  2. Connect one end of the provided RJ45 extension cable to the WIFI Module.
  3. Connect the other end of the RJ45 extension cable to the inverter's COMM interface.
  4. Once the inverter is turned on, the DTU power indicator will always be on. The communication indicator will remain flashing.
Close-up view of the RJ45 port on the SUMRY WIFI Module.
Figure 4: RJ45 Port on WIFI Module
Front view of SUMRY WIFI Module showing indicator lights for power, Wi-Fi, and data.
Figure 5: WIFI Module Indicator Lights

5.2. Wi-Fi Router Connection & App Setup

  1. Download and Install the App: Search for "Hy-Power" in the Apple App Store or scan the QR code below for the Android platform to download and install the application.
    Hy-Power App download screen with QR code for Android and search instruction for Apple Store.
    Figure 6: Hy-Power App Download
  2. User Registration & Login: Open the Hy-Power app. Click the "Register" button on the home page. Fill in the necessary information, including your phone number (ensure the correct country code is entered), and accept the "User Agreement and Privacy Policy". Complete the SMS verification code and click "Register". Return to the home page, enter your username and password, and click "Login".
    App screenshots showing Wi-Fi installation guide: electrical connection, Wi-Fi router connection, app download QR code, user registration and login.
    Figure 7: App Registration and Login
  3. Add DTU & Inverter:
    • Sign up or log in to the Hy-Power app.
    • Click the "+" sign in the upper right corner of the "Equipment List" page to enter the "Add Collector" page.
    • Fill in the necessary information on the "Add DTU" page, then click "Save" to finish adding the collector. You can scan the DTU SN number or type it manually.
    • Click the "Add" button on the corresponding DTU in the "Device List" to enter the "Add device" page. Fill in the inverter information and click "Save" to complete the inverter addition.
    App screenshots showing steps to add DTU and inverter: sign up, add DTU, enter SN, save.
    Figure 8: Adding DTU and Inverter in App
  4. Networking Parameter Setting:
    • On the "Device List" page, click the picture on the left side of the DTU to enter the "DTU details" page.
    • Click the "Wi-Fi" button, enter the correct Wi-Fi name and password, and click "OK" to complete the Wi-Fi parameter configuration.
    • If the app is not connected to the collector Bluetooth, it will first jump to the "Bluetooth distribution network" page. After selecting the corresponding collector for Bluetooth connection, the page will jump back to the "collector details" page. You can continue to enter the Wi-Fi name and password.
    • Click the "Network Test" button on the "Collector Details" page. When the DTU Wi-Fi parameters are configured correctly and successfully connected to the internet, you will receive a prompt of "Network Test Successful".
    App screenshots showing steps for networking parameter setting: connect Bluetooth, enter Wi-Fi password, network test.
    Figure 9: Networking Parameter Setting

6. Operation

6.1. Monitoring and Control via Hy-Power App

After successful setup, you can monitor and control your solar inverter remotely using the Hy-Power app.

  1. Observation & Configuration of Inverter:
    • On the "Device list" page, expand the DTU and click the photo of the inverter. This will take you to the "Status" page of the corresponding inverter.
    • Users can switch to other pages through the buttons at the bottom of the page to observe more detailed inverter information.
    • When it is necessary to configure the inverter parameters, click the "Parameters" button to enter the "Parameter Setting" page. The app will complete the DTU parameter setting through the internet.
    App screenshots showing inverter control panel with PV panel, grid, batteries, load icons, and parameter settings for output energy priority and charge current.
    Figure 10: Inverter Control Panel and Parameter Settings
  2. Controlling Inverter Settings (Video Demonstration):

    This video demonstrates how to use the Hy-Power app to control inverter settings, such as output energy priority and maximum charge current.

    Video 1: How to use WIFI to control the inverter

7. User Tips

  • Ensure your inverter has a touch screen for full compatibility with this WIFI module.
  • Always enable Bluetooth and location permissions on your mobile device for the Hy-Power app to connect successfully.
  • Before configuring the module's Wi-Fi, confirm that your mobile phone is already connected to the desired Wi-Fi network.
  • After adding the collector in the app, proceed to add the device. Avoid directly clicking on network testing immediately after adding the collector.
  • When registering your phone number in the app, ensure the correct country code is entered before the phone number.

8. Troubleshooting

  • Module not powering on: Check the RJ45 cable connection to the inverter. Ensure the inverter is powered on.
  • App cannot find the DTU: Verify Bluetooth is enabled on your phone and the module is within range. Ensure the DTU is correctly added in the app.
  • Wi-Fi connection failed: Double-check the Wi-Fi network name (SSID) and password entered in the app. Ensure your phone is connected to the same Wi-Fi network during configuration. Confirm the Wi-Fi signal strength is adequate.
  • Inverter settings not updating: Ensure the module has a stable internet connection. Verify that you are confirming changes in the app and that the inverter display reflects the new settings.
  • App crashes or freezes: Try restarting the app or your mobile device. Ensure the app is updated to the latest version.

9. Maintenance

The SUMRY WIFI Module requires minimal maintenance. Follow these guidelines to ensure optimal performance:

  • Keep the module clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Ensure all cable connections are secure and free from damage.
  • Avoid placing the module in direct sunlight or near heat sources.
  • Regularly check for app updates to benefit from new features and bug fixes.

10. Frequently Asked Questions (FAQ)

Q: What inverters is this WIFI module compatible with?
A: This WIFI module is specifically designed for SUMRY HGX series touch screen solar inverters. It may not be compatible with other inverter models.
Q: What is the name of the mobile application used with this module?
A: The mobile application is called "Hy-Power". You can download it from the Apple App Store or by scanning the QR code provided in the instructions for Android devices.

11. Warranty and Support

For warranty information and technical support, please refer to the official SUMRY website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.