1. Introduction
Thank you for choosing the BaoFeng UV 13 Plus V2 Walkie Talkie. This high-power, dual-band transceiver is designed for reliable communication across various environments. Featuring a robust design, extensive channel capacity, and convenient USB Type-C charging, it is an ideal companion for both professional and recreational use. This manual provides essential information for the safe and efficient operation of your device.
2. Safety Information
Please read and understand the following safety precautions before using your walkie talkie:
- Do not operate the radio in explosive atmospheres (e.g., flammable gases, dust particles, metallic powders).
- Do not transmit without an antenna attached.
- Keep the radio away from medical devices to avoid interference.
- Use only BaoFeng approved batteries and chargers.
- Do not expose the radio to direct sunlight for extended periods or to extreme temperatures.
- Ensure the USB Type-C port cover is securely closed when not charging to maintain water resistance.
3. Package Contents
Verify that all items are present in your package:
- 1 x Portable Radio (BaoFeng UV 13 Plus V2)
- 1 x Antenna
- 1 x Li-ion Battery Pack
- 1 x Type-C USB Charger
- 1 x Belt Clip
- 1 x Sling (Hand Strap)
- 1 x User's Manual
4. Product Overview
The BaoFeng UV 13 Plus V2 features a compact design with essential controls for easy operation. Refer to the diagram below for key components:
- LED Flashlight: Provides illumination.
- Power Switch/Volume Control: Rotates to turn the radio on/off and adjust volume.
- Key 1 & Key 2: Programmable function keys.
- PTT Key (Push-to-Talk): Press and hold to transmit, release to receive.
- Mic/SP: Microphone and speaker port.
- MENU Key: Accesses the radio's menu system.
- EXIT Key: Exits menu or cancels current operation.
- Keypad: For frequency input, channel selection, and menu navigation.
5. Setup
5.1 Battery Installation
- Align the battery pack with the grooves on the back of the radio.
- Slide the battery pack upwards until it clicks into place.
- To remove, press the battery release latch (if present) and slide the battery downwards.
5.2 Antenna Attachment
- Screw the antenna clockwise into the connector on the top of the radio until it is finger-tight.
- Do not overtighten.
5.3 Charging the Battery
The UV 13 Plus V2 supports USB Type-C charging:
- Connect the Type-C USB cable to the charging port on the side/bottom of the radio.
- Connect the other end of the cable to a compatible USB power source (e.g., car charger, power bank, laptop, or wall adapter).
- The charging indicator light will show the charging status (e.g., red for charging, green for fully charged).
6. Operating Instructions
6.1 Power On/Off and Volume Control
- To power on, rotate the Power Switch/Volume Control knob clockwise.
- To power off, rotate the knob counter-clockwise until it clicks.
- Adjust the volume by rotating the same knob.
6.2 Channel Selection and Frequency Input
- The radio supports 999 memory channels.
- Use the keypad to directly input frequencies or channel numbers.
- Use the up/down arrow keys to navigate through channels or frequencies.
6.3 Transmitting and Receiving (PTT)
- To transmit, press and hold the PTT (Push-to-Talk) button on the side of the radio. Speak clearly into the microphone.
- Release the PTT button to return to receive mode.
6.4 VOX Mode (Hands-Free Operation)
VOX (Voice Operated Transmit) allows transmission without pressing the PTT button. The radio will automatically transmit when it detects your voice.
- Access the menu (MENU key) to find the VOX setting.
- Adjust the VOX sensitivity level (OFF/1-10) as needed.
6.5 Dual Watch & Sync Switchable
- The radio supports dual band, dual display, and dual standby operation (A/B band independent operation).
- The Sync function allows monitoring one channel while displaying both channel name and frequency information.
6.6 Scanning Modes
The UV 13 Plus V2 offers three scanning modes:
- Channel Scanning: Scans through your preset scanning list.
- Frequency Range Scanning: Set a specific frequency range in the menu for precise scanning.
- CTCSS/DCS Tone Scanning: Scans all CTCSS/DCS tones on the current frequency.
6.7 FM Radio
The radio includes an FM radio function (65-108MHz reception). Refer to the menu for activation and tuning.
6.8 Emergency Alarm
The emergency alarm function activates an indicator and flashlight flashing together. Consult the menu for how to activate this feature.
6.9 Keypad Lock
To prevent accidental key presses, activate the keypad lock function via the menu.
7. Programming
7.1 PC Software Programmable
The radio can be programmed using dedicated computer software. This allows for advanced configuration of channels, frequencies, and other settings. A programming cable (not always included, check your specific package) is required.
7.2 Manual Programmable
Many settings can be programmed directly through the radio's keypad and menu. This includes adding/deleting memory channels, adjusting VOX/squelch/power save levels, and adding/removing channels from the scanning list.
8. Maintenance
8.1 Battery Care
- Charge the battery fully before first use.
- Avoid overcharging or completely draining the battery to prolong its lifespan.
- Store the battery in a cool, dry place when not in use.
8.2 Cleaning
- Clean the radio's exterior with a soft, damp cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure all port covers are closed before cleaning to prevent water ingress.
8.3 Water Resistance
The BaoFeng UV 13 Plus V2 is rated IPX4 life waterproof (Splash waterproof protection). This means it is protected against splashing water from any direction. It is not designed for submersion. Always ensure the USB Type-C port cover is sealed when not in use.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio won't turn on | Battery is dead or not installed correctly. | Charge the battery or re-install it correctly. |
| Cannot transmit or receive | Incorrect frequency/channel, low battery, or antenna not connected. | Verify frequency/channel, charge battery, ensure antenna is securely attached. |
| Poor audio quality | Weak signal, incorrect squelch level, or damaged speaker/microphone. | Move to an area with better signal, adjust squelch, check for physical damage. |
| Keypad unresponsive | Keypad lock is active. | Deactivate keypad lock via the menu. |
10. Specifications
| General Specifications | |
|---|---|
| Model | BF-UV13 PRO |
| Frequency Range | 136-174MHZ & 400-520MHZ |
| FM Radio | 65-108MHZ (Reception) |
| Storage Channel | 999 |
| Battery Capacity | 4200mAh (Li-ion) |
| Output Power (W) | 5W-10W |
| Maximum Range | 5km-10km |
| Waterproof / Water-Resistant | IP57 (Product Property) / IPX4 (Description) |
| Is Display | Yes (1.44 Inch LCD) |
| Material | Plastic (PC+ABS) |
| Dimensions (L x W x H) | 269 x 55.8 x 35mm |
| Weight | 130g (approximate) |
| Operating Voltage | 7.4V DC±10% |
| Antenna Impedance | 50ohm (SMA-Female) |
| Headphone Jack Type | 2 Pin Kenwood Plug |
| Charging Jack | USB Type-C |
| Emergency Alarm | Indicator and flashlight Flashing Together |
| Mode Of Operation | Simplex Or Semi-duplex |
| Frequency Stability | ±2.5ppm |
| Frequency Step | 2.5/5/6.25/10/12.5/20/25KHz |
| Working Temperature | -20~+50°C |
| Transmitter | |
| Type Of Modulation | 16køF3E / 11køF3E |
| Max Frequency Deviation | < 5kHz (Wide) / < 2.5kHz (Narrow) |
| Emission Current | <= 1.5A (5W) |
| CTCSS / DCS | 0.7±0.1kHz (Wide) / 0.4±0.1kHz (Narrow) |
| Reception | |
| Sensitivity | -122dBm (12dB SINAD) |
| Audio Power | 1W |
| Intermediation Distortion | <10% |
| Inter Modulation | >=65Db / >=60dB |
| Spurious Response | 65dB |
| Adjacent Channel Selectivity (Wide/Narrow) | <-65dB (Wide) / <-60dB (Narrow) |
| Receiving Current | <=380mA |
11. User Tips
- For optimal performance, ensure the battery is fully charged before extended use.
- Experiment with different VOX sensitivity levels to find the best setting for your environment and voice.
- Utilize the dual watch feature to monitor two important channels simultaneously.
12. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
