1. Introduction
Thank you for choosing the EAFC 12V/24V Fully Automatic Smart Car Battery Charger. This advanced charger is designed to keep your vehicle's battery in optimal condition through its intelligent 7-stage charging process. It is suitable for a wide range of battery types and offers features like pulse repair and automatic temperature compensation.
This manual provides essential information for the safe and effective use of your charger. Please read it thoroughly before operation.
2. Safety Instructions
WARNING: Please read and understand all safety warnings and instructions before using this product. Failure to do so may result in electric shock, fire, or serious injury.
- It is strictly forbidden to charge non-lead-acid batteries with non-12V output voltage, non-rechargeable batteries, non-voltage batteries for scrapped batteries, or disabled lithium batteries.
- To charge a vehicle or equipment battery, always remove the battery from the vehicle first. Choose an empty area free from flammable and explosive items to charge the battery, to prevent fire. Accidents occurring due to non-compliance are at your own risk.
- If the charging time exceeds 12 hours without supervision, the power supply must be disconnected. Prolonged charging is strictly prohibited.
- This product must be protected from rain and direct sunlight. It is strictly forbidden to cover the charger during operation. Keep away from open flames while charging and store flammable materials in a well-ventilated environment.
- Before each charge, inspect the charger, plugs, and power cords for any abnormalities, damage, or cracks. If any abnormality is found, discontinue use immediately. To avoid danger, contact the seller for return to the original factory or for repair/replacement by professional maintenance personnel before further use.
- Always disconnect the power supply before connecting or disconnecting the battery charger and the battery.
The charger is equipped with multiple protection features for safe operation:
- Reverse Polarity Protection
- Short Circuit Protection
- Overcurrent Protection
- Overheat Protection
- Overvoltage Protection
- Low Voltage Protection
- Electric Shock Protection
- Fire Protection
3. Product Overview
The EAFC Smart Car Battery Charger features a robust design with a large digital display for easy monitoring and intuitive controls. It incorporates microprocessor control for efficient and safe charging.
3.1 Components
- Charger Unit with integrated handle
- AC Power Cord (Input cable length: approx. 110cm)
- Battery Clamps (Red for positive, Black for negative) (Output cable length: approx. 85cm)
3.2 Display and Controls
The large digital display provides real-time information on battery voltage, charging current, ambient temperature, and battery power level. A single 'MODE' button allows selection of charging modes.
3.3 Design Features
- Foldable Handle: The top portable handle and bottom bracket can be folded for easy carrying and storage.
- Portable Storage: The unique design on the back allows for wrapping and storing power cords, and clips on both sides for convenient storage of battery clamps.
4. Setup
Before connecting the charger, ensure the battery parameters match the charger's capabilities.
4.1 Connecting to a 12V Battery
- Plug the AC power cord into a household 220V power supply.
- Select the appropriate charging mode using the 'MODE' button.
- Connect the red clamp to the positive (+) terminal of the battery.
- Connect the black clamp to the negative (-) terminal of the battery.
- The charger will automatically begin charging.
4.2 Connecting to a 24V Battery
- Connect two 12V batteries in series to achieve 24V.
- Plug the AC power cord into a household 220V power supply.
- Select the appropriate charging mode using the 'MODE' button.
- Connect the red clamp to the positive (+) terminal of the battery.
- Connect the black clamp to the negative (-) terminal of the battery.
- The charger will automatically begin charging.
Important:
- If the positive and negative poles are connected incorrectly or abnormally, the screen will flash "reverseconnection" and display "El-I-". Correct the connection before proceeding.
- Ensure the battery parameters match the charger's specifications before connecting.
5. Operating Instructions
Once connected and powered, the charger will automatically detect the battery and begin the charging process. The display will cycle through battery voltage, current, and ambient temperature.
5.1 Charging Modes
Use the 'MODE' button to select the appropriate charging mode for your battery type:
| Mode Icon | Mode Name | Description |
|---|---|---|
 | CAR/TRUCK | For large batteries (Fast Charge). Max current: 12V @ 8A, 24V @ 4A. |
 | AGM | Specifically for AGM and Calcium batteries. |
 | MOTORCYCLE | For small batteries (Slow Charge). Max current: 1.5A. |
 | REPAIR | An advanced 18-hour battery recovery mode for old, idle, damaged, stratified, or sulfated batteries. Note: Not all batteries can be recovered. |
5.2 Winter and Summer Charging
The charger automatically detects the ambient temperature and adjusts the charging voltage accordingly. This ensures optimal charging in both cold winter conditions (increased voltage to compensate for internal resistance) and hot summer conditions (lowered voltage to prevent overcharging).
5.3 Completing the Charge
Once charging is complete, the battery power bar on the screen will show 100% and display "FUL". It is recommended to continue trickle charging for approximately 1 hour for optimal results.
To disconnect: First, unplug the AC power cord from the wall outlet. Then, remove the positive (red) and negative (black) battery clamps. The charger is now ready for storage or next use.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your EAFC battery charger.
- Keep the charger clean and dry. Protect it from rain and direct sunlight.
- Do not cover the charger during operation to ensure proper ventilation.
- Store the charger and its components in a well-ventilated area, away from open flames and flammable materials.
- Regularly inspect the charger, plugs, and power cords for any signs of damage, cracks, or abnormalities. If any issues are found, discontinue use and contact support.
- The charger features an intelligent silent fan for heat dissipation, which helps extend its lifespan. Ensure the fan vents are not obstructed.
7. Troubleshooting
This section addresses common issues you might encounter with your EAFC battery charger.
7.1 Error Codes
- "El-I-" Display: This error code indicates a reverse connection of the battery clamps (positive and negative poles are connected incorrectly) or an abnormal connection. Immediately disconnect the charger and correct the connections before restarting.
7.2 Common Issues
- Charger not starting: Ensure the AC power cord is securely plugged into a working outlet and the battery clamps are correctly connected to the battery terminals.
- Battery not recovering in Repair Mode: The 'REPAIR' mode is an advanced recovery function, but it's important to note that not all deeply discharged, damaged, or sulfated batteries can be fully recovered.
- Charger overheating: While the charger has overheat protection and an intelligent cooling fan, ensure it is used in a well-ventilated area and not covered during operation.
If you encounter any persistent issues not covered here, please refer to the Warranty and Support section for assistance.
8. Specifications
| Feature | Specification |
|---|---|
| Product Models | FPT-100 (Yellow), FPT-200 (Red) |
| Input Voltage | AC100-240V, 50-60Hz |
| Rated Output (FPT-100) | 12V 10A, 24V 5A |
| Rated Output (FPT-200) | 12V 20A, 24V 10A |
| Minimum Start Voltage | 5.0V |
| Efficiency | Approx. 85% |
| Thermal Protection | 65°C +/- 5°C |
| Cooling | Fan |
| Applicable Battery Types | Calcium, Gel, AGM, Wet, LiFePO4, Lead Acid batteries (6AH-200AH for FPT-100, 6AH-300AH for FPT-200) |
| Dimensions (L×W×H) | 192mm × 102mm × 165mm |
| Net Weight (FPT-100) | 745g |
| Net Weight (FPT-200) | 955g |
| Compliant Standards | CE, UKCA, FCC |
9. User Tips
- For optimal battery conditioning and to ensure a full charge, it is recommended to allow the charger to continue trickle charging for approximately one hour after the 'FUL' indicator appears.
- Always ensure the charger is placed on a stable, non-flammable surface during operation.
- Regularly check the battery terminals for corrosion and clean them if necessary to ensure good electrical contact.
10. Warranty and Support
EAFC is committed to providing reliable products and customer satisfaction. Your charger comes with a 30-day warranty from the store for any product quality problems.
10.1 Item Guides & Documents
A detailed user manual in PDF format is available for download: User manual (PDF)
10.2 Service Commitments
- Fast Delivery: If delivery is delayed, a coupon code may be provided. Refunds are available if the package is lost or items are damaged.
- Free Returns: Enjoy free returns within 90 days if you are not satisfied with your order.
10.3 Compliance
Disclaimer: ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
