KKMOON Electronic Thermostat with LED Digital Display

Contents

KKMOON Electronic Thermostat with LED Digital Display User Manual

1. Introduction

This manual provides instructions for the KKMOON Electronic Thermostat, a versatile temperature controller designed for precise temperature management in various environments. It is suitable for applications such as vegetable greenhouses, domestic water tanks, refrigerators, industrial chillers, boilers, aquariums, and aquaculture systems.

Front view of the KKMOON Electronic Thermostat with LED display and universal socket.
Figure 1: KKMOON Electronic Thermostat overview.

2. Features

  • Intelligent temperature control for precise environmental management.
  • Large and clear LED dual display for simultaneous viewing of current and set temperatures.
  • Wide temperature measurement range: -40℃ to 120℃ (-40℉ to 248℉).
  • Supports both cooling and heating control modes.
  • Equipped with a power supply cord for convenience.
  • Delay protection function to safeguard connected equipment.
  • Brown-out storage ensures set parameters are retained after power interruptions.

3. Package Contents

The package includes:

  • 1 x Temperature Controller
  • 1 x User Manual (this document)

4. Specifications

ParameterValue
ColorBlack
MaterialPC
Working Voltage90V~250V AC
Rated Current10A
Power Consumption≤3W
Power Consumption (Standby)≤0.5W
Precision of Temperature Control0.1℃
Resolution0.1℃
Measurement Error±0.3℃
Control Range-40~120℃ (-40~248℉)
Slewing Range of Temperature0.1~30℃ (adjustable)
Working Temperature-20~70℃ (-4~158℉)
Working Humidity90% RH Non Condensing
Temperature SensorNTC 25℃=10K B3435 ±1% (1.48m Line)
Length of Power Line1.45m / 57.1in
Relay10A / AC220V
Item Size15.5 * 6 * 2.8cm / 6.1 * 2.4 * 1.1in
Item Weight245.2g / 8.6oz
Package Size21.5 * 11 * 3.5cm / 8.5 * 4.3 * 1.4in
Package Weight317g / 11.2oz

5. Setup

  1. Unpack and Inspect: Carefully remove the thermostat and all accessories from the packaging. Inspect for any damage.
  2. Connect Temperature Probe: Plug the NTC temperature sensor probe into the designated port on the thermostat. Ensure a secure connection.
  3. Power On: Plug the thermostat's power cord into a standard AC 90V~250V electrical outlet. The LED display should illuminate, showing the current temperature (T Temp) and a default set temperature (S Temp).
  4. Position Temperature Probe: Place the temperature probe in the environment where temperature control is required (e.g., water tank, greenhouse, incubator). Ensure the probe is fully immersed or positioned to accurately measure the desired area.
  5. Connect Heating/Cooling Device: Plug your heating or cooling appliance (e.g., heater, fan, pump) into the universal socket on the front of the thermostat. The thermostat will control the power supply to this socket based on your settings.
Thermostat components including power plug, temperature probe, and control unit.
Figure 2: Thermostat components and connections.

6. Operating Instructions

The thermostat features a dual LED display showing the current temperature (green, 'T Temp') and the set target temperature (red, 'S Temp'). Control buttons are located on the side of the unit.

6.1. Setting the Target Temperature

  1. Enter Setting Mode: Press and hold the 'SET' button (usually the button between the up/down arrows, or a dedicated 'SET' button if present) for a few seconds until the 'S Temp' display starts flashing.
  2. Adjust Temperature: Use the 'Up' (▲) and 'Down' (▼) arrow buttons to adjust the desired target temperature.
  3. Confirm Setting: Press the 'SET' button again to confirm the new target temperature. The display will stop flashing, and the thermostat will begin operating according to the new setting.

6.2. Cooling and Heating Modes

The thermostat automatically switches between cooling and heating modes based on the current temperature and your set target temperature, along with the configured slewing range (hysteresis).

6.3. Delay Protection

The delay protection function prevents rapid cycling of connected equipment, extending its lifespan. This is particularly useful for compressors in cooling systems.

6.4. Brown-out Storage

All set parameters are automatically saved and will be restored even after a power outage, ensuring continuous operation without re-configuration.

Angled view of the thermostat showing LED display with current and set temperatures, and control buttons.
Figure 3: LED display and control buttons.

7. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Probe Care: Ensure the temperature probe is clean and free from debris for accurate readings. Avoid bending or damaging the probe cable.
  • Storage: When not in use for extended periods, store the thermostat in a cool, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

8.1. Display Not Lighting Up

  • Check if the power cord is securely plugged into a working electrical outlet.
  • Ensure there is power to the outlet.

8.2. Incorrect Temperature Readings

  • Verify that the temperature probe is correctly connected to the thermostat.
  • Ensure the probe is properly positioned in the environment being measured and is not obstructed.
  • Check the probe cable for any signs of damage.

8.3. Connected Device Not Activating

  • Confirm that the heating/cooling device is properly plugged into the thermostat's socket and is functional independently.
  • Check your set temperature and slewing range to ensure the conditions for activation are met.
  • Allow for the delay protection function to complete its cycle if recently powered on or settings changed.

9. User Tips

  • Programming: Users often inquire about programming the thermostat. Take your time to understand the 'SET' button and arrow controls for precise adjustments.
  • Probe Placement: For optimal performance, ensure the temperature probe is placed in a location that accurately represents the average temperature of the environment you wish to control, away from direct heat sources or drafts.
  • Power Interruption: The brown-out storage feature is very convenient. You don't need to re-enter your settings after a power cut.

10. Frequently Asked Questions (FAQ)

Q: How do I program the thermostat to set a specific temperature?
A: To program the thermostat, press and hold the 'SET' button until the 'S Temp' display flashes. Use the up/down arrows to adjust the desired temperature, then press 'SET' again to confirm. Refer to section 6.1 for detailed instructions.
Q: Can this thermostat be used for both heating and cooling?
A: Yes, this thermostat supports both cooling and heating control, automatically switching modes based on your set temperature and the current environmental conditions.

11. Warranty and Support

For warranty information, technical support, or further assistance, please contact the seller or refer to the official product documentation. A digital version of the user manual is available at: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.