skysonic 4K HD Sports Action Camera

Contents

skysonic 4K HD Sports Action Camera User Manual

Model: 4K HD Sports Action Camera

Introduction

Congratulations on your purchase of the skysonic 4K HD Sports Action Camera! This versatile camera is designed to capture your adventures in stunning 4K resolution, featuring dual screens for easy framing, advanced anti-shake stabilization, and a robust waterproof design for various outdoor activities, including diving. This manual will guide you through the setup, operation, and maintenance of your new action camera.

Product Overview

Familiarize yourself with the camera's components and features.

skysonic 4K HD Sports Action Camera showing front, back, side, top, and bottom views with buttons and ports

Figure 1: Camera views highlighting buttons and ports.

skysonic 4K HD Sports Action Camera showing its 1.4-inch front screen and 2.0-inch rear screen

Figure 2: Front (1.4-inch) and Rear (2.0-inch) screens.

Specifications

FeatureDescription/Value
DisplayFront: 1.4 inches IPS HD screen / Rear: 2.0 inches IPS touch screen
Wi-Fi Module2.4G-2.48G, 802.11a/b/g/n/ac
MicrophoneBuilt-in waterproof microphone; External: Compatible with dedicated TYPE-C
Speaker8 ohm 0.5 watt speaker
Indicator LightLED charging/working indicator light
Body SizeLength 50.1mm x Width 32mm x Thickness 81mm
Working Temperature-10°C ~ 40°C
BatteryRemovable rechargeable lithium battery, 1800mAh/6.66Wh
Battery LifeApprox. 150 minutes @1080P/30fps
Wireless Remote ControlCompatible with dedicated 2.4G remote control (optional)
Video Resolution (Horizontal)4K30, 2.7K30, 1080P60 (16:9) @MOV, H.264
Video Resolution (Vertical)1080P60/30 (9:16) @MOV, H.264
GyroscopeBuilt-in 3-axis anti-shake gyroscope
InterfaceType-C 5pin + TF card slot
Power Input5V 1~2A
Photo Resolution20M/16M/14M/12M@JEPG
Pre-recording ModeSupports full-resolution video pre-recording
Loop RecordingOff / 1 minute / 3 minutes / 5 minutes
Timing Photo Taking5 seconds / 10 seconds / 20 seconds
Driving ModeSupports power-on start-up recording, power-off stop recording and shutdown
Wi-Fi AppLiveDVapp (supports Android/iOS system)
Screen ProtectionSupports 30 seconds / 1 minute / 3 minutes no operation automatic screen off
Storage MediumUp to 64GB high-speed MicroSD card (Class 10/U1 or above)
Continuous Timing3 seconds / 5 seconds / 10 seconds / 30 seconds / 60 seconds
Waterproof GradeIP68 - 30 meters waterproof (requires a special waterproof case)
Audio FormatACC/two-channel
Time and DateSupports manual setting
Automatic ShutdownSupports 1 minute / 3 minutes / 5 minutes no operation automatic shutdown
Storage Temperature-20°C ~ 60°C
Supporting LanguageRussian, English, Korean, Brazilian Portuguese, Simplified Chinese
Effective MegaPixelAbout 2MP
Image SensorOther SONY Series
Main ProcessorGP2 (Maximum HD Support)
CertificationCE

Setup

1. Battery Installation

  1. Locate the battery compartment on the camera.
  2. Open the compartment cover.
  3. Insert the 1800mAh rechargeable lithium battery, ensuring the contacts align correctly.
  4. Close the battery compartment cover securely.
Image showing the removable 1800mAh battery being inserted into the camera.

Figure 3: Battery insertion.

2. Memory Card Installation

  1. Locate the TF card slot on the side of the camera.
  2. Insert a high-speed MicroSD/TF card (Class 10/U1 or above, up to 64GB) into the slot until it clicks into place.
  3. To remove, gently push the card in again until it springs out.
Image showing the camera with a MicroSD card being inserted into its slot.

Figure 4: Memory card slot location.

3. Charging the Camera

  1. Connect the camera to a power source (5V 1-2A) using a Type-C USB cable.
  2. The LED indicator light will show the charging status.
  3. A full charge provides approximately 150 minutes of recording at 1080P/30fps.
Image showing a dual battery charger, indicating Type-C charging capability for the camera's batteries.

Figure 5: Dual battery charger (optional accessory) for efficient charging.

4. Waterproof Case Usage

For underwater activities, ensure the camera is placed inside the special waterproof case. This case provides IP68 protection, allowing the camera to be submerged up to 30 meters.

  1. Open the waterproof case latches.
  2. Carefully place the camera inside, ensuring it is seated correctly.
  3. Close the latches firmly to create a watertight seal.
  4. Before first use, test the waterproof case without the camera to ensure no leaks.
Image showing the camera inside its waterproof case, submerged underwater, highlighting its 30M waterproof capability.

Figure 6: Camera in waterproof case for 30M diving.

Operating Instructions

1. Power On/Off

Press and hold the Power button (usually located on the side or front) for a few seconds to turn the camera on or off. The LED indicator will light up when the camera is on.

2. Navigating the Screens

The camera features a 1.4-inch front screen and a 2.0-inch IPS touch rear screen. Use the touch screen for menu navigation and settings adjustments. The front screen is ideal for vlogging and selfies.

3. Video Recording

  • Resolutions: The camera supports various resolutions including 4K at 30fps, 2.7K at 30fps, and 1080P at 60fps for horizontal (16:9) video. For vertical (9:16) video, it supports 1080P at 60fps or 30fps.
  • Start/Stop Recording: Press the Shutter/Record button to start and stop video recording.
  • Pre-recording: Enable the pre-recording mode to capture video 5 seconds before you press the record button, ensuring you don't miss crucial moments.
  • Loop Recording: Choose between Off, 1 minute, 3 minutes, or 5 minutes for continuous loop recording, useful for dashcam functionality.
  • EIS Stabilization: The built-in 3-axis anti-shake gyroscope (HyperSmooth 6.0 Ultra Stabilization) helps to smooth out shaky footage. Ensure EIS is enabled in settings for optimal results.
  • Audio: The camera records ACC two-channel audio using its built-in waterproof microphone. An external Type-C microphone can also be connected for enhanced audio quality.
Image illustrating the pre-recording function, capturing 5 seconds before the button is pressed, with a fishing scene.

Figure 7: Pre-recording function in action.

Comparison image showing video footage with EIS (Electronic Image Stabilization) off versus EIS on, demonstrating improved stability.

Figure 8: EIS stabilization comparison.

Image showing loop recording, video and audio synchronization, and instant review features with various scenarios.

Figure 9: Loop recording and audio synchronization.

4. Photo Taking

  • Resolutions: Capture photos at 20M, 16M, 14M, or 12M resolution in JEPG format.
  • Single Snapshot: Default mode for taking a single photo.
  • Timing Photo: Set a delay of 5, 10, or 20 seconds before the photo is taken.
  • Continuous Timing: Capture a series of photos at intervals of 3, 5, 10, 30, or 60 seconds.

5. Driving Mode

When enabled, the camera will automatically start recording when powered on (e.g., connected to a car's power) and stop recording and shut down when power is removed.

6. Wi-Fi and App Connection

  1. Turn on Wi-Fi on your camera through the settings menu.
  2. Download the 'LiveDVapp' from the App Store (iOS) or Google Play (Android) to your smartphone.
  3. Connect your smartphone to the camera's Wi-Fi network. The network name and password will be displayed on the camera screen.
  4. Open the LiveDVapp to control the camera, view live footage, and transfer files wirelessly.
Image showing the camera wirelessly connected to a smartphone via the LiveDVapp, with App Store and Google Play icons.

Figure 10: Wireless Wi-Fi transfer via LiveDVapp.

7. Optional Wireless Remote Control

If you have the optional 2.4G wireless remote control, pair it with your camera according to the remote's instructions. This allows for convenient control of recording and photo capture from a distance.

Image showing the camera mounted on a stick, with an optional wireless microphone and remote control in the foreground.

Figure 11: Optional wireless microphone and remote control.

8. Screen Protection and Automatic Shutdown

To conserve battery and prevent accidental input, the camera supports automatic screen off after 30 seconds, 1 minute, or 3 minutes of inactivity. It also features an automatic shutdown function after 1 minute, 3 minutes, or 5 minutes of no operation.

Maintenance

1. Cleaning

  • Use a soft, lint-free cloth to clean the camera body and screens.
  • For lenses, use a specialized lens cleaning cloth and solution to avoid scratches.
  • Ensure the camera is dry before closing any ports or compartments, especially after using the waterproof case.

2. Battery Care

  • Store the battery in a cool, dry place when not in use.
  • Avoid fully discharging the battery frequently to prolong its lifespan.
  • If storing for extended periods, charge the battery to about 50-60%.

3. Storage

Store the camera within the recommended temperature range of -20°C to 60°C. Avoid extreme temperatures and high humidity.

Troubleshooting

Camera Not Turning On

  • Ensure the battery is correctly inserted and fully charged.
  • Try charging the camera for at least 30 minutes before attempting to power it on again.

Wi-Fi Connection Issues

  • Make sure Wi-Fi is enabled on both the camera and your smartphone.
  • Check that you are entering the correct Wi-Fi password.
  • Restart both the camera and your smartphone, then try connecting again.

Blurry Images/Videos

  • Clean the camera lens with a soft, lint-free cloth.
  • Ensure EIS (Electronic Image Stabilization) is enabled in settings for video recording, especially during action shots.
  • Check lighting conditions; poor light can affect image quality.

Short Battery Life

  • Reduce video resolution or frame rate to extend battery life.
  • Disable Wi-Fi when not in use.
  • Adjust screen brightness and enable screen protection/auto-shutdown features.

User Tips

  • Utilize Dual Screens: Use the front screen for perfect vlogging and selfie framing, and the larger rear touch screen for detailed playback and menu navigation.
  • Capture Action with Pre-recording: Enable the 5-second pre-recording feature to ensure you never miss the start of an unexpected moment, like a fish jumping or a quick trick.
  • Smooth Footage: Always ensure the 3-axis anti-shake gyroscope (EIS) is active when recording dynamic activities like cycling or skiing to get the smoothest possible video.
  • Wide-Angle for Landscapes: Leverage the 150° super wide-angle lens to capture expansive landscapes and immersive scenes.
  • Waterproof Adventures: Always use the dedicated waterproof case for any water-based activities to protect your camera up to 30 meters.

Warranty and Support

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support or service inquiries, please contact your retailer or the manufacturer's customer service.

Product Video

Product demonstration video showcasing key features like dual screens, stabilization, and waterproof capabilities.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.