1. Overview
The FeiyuTech VB4 is a three-axis handheld gimbal designed for smartphones, featuring an extendable bar for versatile shooting. Its compact and foldable design makes it highly portable. The gimbal supports both landscape and portrait shooting modes and allows for direct phone camera control.
Before using the gimbal, please review this manual for important information regarding setup, operation, and maintenance.

2. Setup
2.1 Unfold and Fold
To unfold the gimbal, gently extend its arms until it locks into the operating position. To fold, rotate the axes and align them with the limit points for convenient storage.

2.2 Smartphone Installation
- It is recommended to remove the smartphone case before installation.
- Ensure the gimbal is powered off.
- Keep the logo of the smartphone holder upward.
- Install the smartphone into the holder, ensuring it is centered.
- If the smartphone is tilted, gently move it left or right to achieve a horizontal balance.
2.3 Tripod Installation
The tripod can be attached to the bottom of the gimbal by rotating it. Install or remove it based on your shooting requirements.
2.4 Extendable Rod
To extend the handle, hold the handle with one hand and the bottom of the pan axis with the other, then pull the extendable rod out to the desired length. To reset, push the upper grip to retract the extendable bar into the handle part. Do not rotate the rod when extending or resetting it.
2.5 Charging
Fully charge the battery before initial use. Connect the USB-C cable to charge. The indicator light will be yellow during charging and turn green when charging is complete. If the battery is low, the red light will flash rapidly, indicating the need for immediate charging.

2.6 App Download & Connection
The Feiyu ON App enhances the gimbal's functionality. It requires iOS 12.0 or above, or Android 8.0 or above.
- Scan the QR code below or search "Feiyu ON" in your device's app store to download.
- Enable Bluetooth on your smartphone.
- Log in to the Feiyu ON App (register if it's your first time).
- Install your smartphone on the gimbal, then power on the gimbal.
- Search for "FY_VB4_xx" in the App and tap to connect. A "connection succeed" message will appear.
- If connection fails, try restarting the App, checking Bluetooth, or resetting the gimbal's Bluetooth connection (move joystick downward and triple tap power button, then reboot gimbal).


3. Operating Instructions
3.1 Power ON/OFF/Standby
- Power ON/OFF: Long press the power button until you hear a tone.
- Enter Standby Mode: Double tap the power button.
- Wake Up from Standby: Tap the power button again.
3.2 Landscape & Portrait Mode Switching
Double click the 'M' button or manually rotate the smartphone holder to switch between landscape and portrait modes. Avoid anti-clockwise rotation in landscape mode and clockwise rotation in portrait mode.

3.3 Control Panel Overview
The gimbal features an intuitive control panel for easy operation.

| Component | Action | Function |
|---|---|---|
| Power Button | Long press | Power ON/OFF |
| Single tap | Check battery level | |
| Double tap | Enter/Exit standby mode | |
| Knob | Rotate | Control focus/zoom (default) or roll/tilt/pan axis movement |
| Knob Function Switching Button | Single tap | Switch control object of dial (focus/zoom or axes) |
| Long press | Switch dial between control axes/control focus and zoom | |
| Joystick | Move | Control tilt and pan axes movement; navigate menus in App |
| Shutter Button | Half press (original camera App) | Focus |
| Single tap (original camera App) | Take photo / Start/stop recording | |
| M Button | Single tap | Switch among Pan Follow / All Follow / Follow mode |
| Double tap | Switch landscape and portrait mode | |
| Trigger Button | Long press | Lock mode (release to exit) |
| Double tap | Recenter | |
| Single tap | Start AI face tracking | |
| Triple tap | Switch front/rear camera |
3.4 Operation Modes
The VB4 offers several operation modes to suit different shooting scenarios:
- Pan Mode: The roll and tilt directions are fixed, and the smartphone moves according to the user's left-right hand movements.
- Lock Mode: The orientation of the camera is fixed.
- Follow Mode (Default): The roll direction is fixed, and the smartphone moves according to the user's left-right and up-down hand movements.
- All Follow Mode: The camera moves according to all user's hand movements.
- Reset: Returns to pan mode, with all three axes returning to their default position.
- Manual Lock: Slide the tilt axis to one position for shooting.
- Landscape and Portrait Shot: Assists in shooting in either landscape or portrait orientation.
- Underslung Mode: Hold the gimbal upside down to capture images from a lower position. The tripod can be used for assistance.
- Side Grip Mode: Rotate the gimbal 90° to the right or left to hold the smartphone horizontally to the ground.
- Low Position Mode: Extend the built-in extendable rod and adjust the angle to shoot from a low angle.

3.5 Gesture Control
The VB4 supports various gesture controls for hands-free operation, especially useful for solo filming.

- OK gesture (Left or right hand): Start/Stop tracking. Green light stays on for tracking, red light for standby. Gestures must be separated by 3 seconds.
- Spread palm (Left or right hand): Shutter. Takes a photo or starts recording after a 3-second countdown. Repeat to stop recording.
- Thumbs opposite direction: Stop tracking. Enters standby mode (red or orange light stays on).
- Thumbs up: Landscape to portrait. Switches gimbal from landscape to portrait mode, stops tracking.
- Thumbs right: Portrait to landscape. Switches gimbal from portrait mode to landscape mode, stops tracking.
- Double L-Shaped gestures: Custom framing. Starts framing (green light blinks fast). Perform again to complete framing when the subject is in position (green light stays on).


3.6 App Functions & Creative Modes
Connecting to the Feiyu ON App unlocks advanced features and creative shooting modes:
- Smart AI Follow: The gimbal can track your subject smoothly, keeping them centered in the frame. Activate this mode via the App.
- Panoramic Mode: Capture wide panoramic shots.
- Hyper-Lapse: Create dynamic time-lapse videos.
- Dutch Angle: Achieve unique cinematic effects with a tilted horizon.
- Other Modes: Photo/Video, Free panorama, Ultra-wide angle, 180° panorama, 360° panorama, Overlapping image, Light rail mode, Quick panorama, Static timelapse, Track timelapse, Dolly Zoom, Light rail video, Video editing.




3.7 Lighting-enabled Tracking Module (Optional Accessory)
The optional Lighting-enabled Tracking Module (Feiyu VB4 Series) provides additional functionality:
- Installation: The module can be easily installed and uninstalled.
- Tracking: Supports Selfie tracking (red light stays on) and Rear tracking (orange light stays on).
- Button Operation:
- Long press: Turn On/Off Light.
- Single tap: Switch brightness (High/Medium/Low).
- Double tap: Switch color temperature (Mixed light/Cold light/Warm light).
- Triple tap: Switch rear tracking/Selfie tracking (Default).

4. Maintenance
4.1 Storage and Care
- Keep the product out of reach of children and pets.
- Do not leave the product near heat sources such as a furnace or heater, or inside a vehicle on hot days.
- Store the product in a dry environment.
- Do not overcharge or overuse the battery, as this can damage the battery core.
- Never use the product when the temperature is too high or too low.
5. Troubleshooting
5.1 Gimbal Initialization
Initialize the gimbal if:
- The camera is not level.
- The gimbal has not been used for a long period.
- The ambient temperature changes abruptly.
Methods:
- Initialize via the Feiyu ON App (Reset gimbal parameters).
- Tap the power button 5 times.
If initialization is unsuccessful for a long time, restart the gimbal and retry.
5.2 Protection Mechanism
The gimbal has built-in protection mechanisms:
- Battery too low / Temperature too high / Power on without load / Overload / Software conflict: Gimbal powers off after an alarm sound and may send a message to the App.
- Remove smartphone after powered on: Gimbal enters standby mode with a green breathing light. If left in standby for 10 minutes, it will auto power off.
- Power on when lying down: Gimbal powers off after an alarm sound and may send a message to the App.
5.3 Bluetooth Connection Issues
If you fail to find the Bluetooth connection:
- Shut down the Feiyu ON App in the background and restart.
- Move the joystick downward and triple tap the power button simultaneously to reset the Bluetooth connection. The gimbal's Bluetooth can only be reconnected after rebooting the gimbal.
5.4 Indicator Lights
Understanding the indicator lights can help diagnose issues:
| Indicator | Description |
|---|---|
| Green light stays on | Charge completed |
| Yellow light stays on | Charging |
| Flashes yellow and red alternately | Low power |
| Red light keeps flashing quickly | Low power, will auto power off |
| Breathing light (Yellow) | Standby mode |
| Indicator | Description |
|---|---|
| Green light stays on | High level of battery |
| Blue light stays on | Medium level of battery |
| Red light keeps flashing slowly | Low power |
| Red light keeps flashing quickly | Low power, will auto power off |
| Breathing light (Green) | Standby mode |
| Indicator | Description |
|---|---|
| Blue light stays on | Bluetooth connected |
| Blue light flash | Bluetooth disconnected / Bluetooth connected, App disconnected |
| Blue light keeps flashing quickly | Reset Bluetooth connection of gimbal |
| Indicator | Description |
|---|---|
| White lights turn on in turn then grow solid white | Powering on |
| P light on | Pan follow |
| P, T, R lights on | Follow mode (default) |
| All P, T, R lights on | All follow mode |
| R light on | Lock mode |
6. Specifications
| Feature | VB4 | VB4SE |
|---|---|---|
| Product Name | Feiyu VB 4 3-Axis Handheld Gimbal for Smartphone | |
| Max. Tilt Range | -20° ~ +35° (±3°) | |
| Max. Roll Range | -60° ~ +60° (±3°) | |
| Max. Pan Range | -80° ~ +185° (±3°) | |
| Size (folded) | About 98.5 × 159.5 × 52.8mm | |
| Net Gimbal Weight (not including tripod) | About 335g | About 315g |
| Battery | 950mAh | 1300mAh |
| Charging Time | ≤ 2.5h | ≤ 3.5h |
| Battery Life (lab environment with 205g load) | ≤ 6.5h | ≤ 9h |
| Payload Capability (after balanced) | ≤ 260g | |
| Adapter Smartphones | iPhone & Android phones (width ≤ 88mm) | |
| Wireless Function | Yes | |
| Battery Included | Yes | |
| Material | Plastic | |
| Communication | Bluetooth | |
| APP | Feiyu ON | |
| Certification | CE | |
6.1 Optional Accessory: Lighting-enabled Tracking Module
| Feature | Detail |
|---|---|
| Accessory Name | Lighting-enabled Tracking Module for Feiyu VB4 Series |
| Accessory Model | FYVltm |
| Power | < 1W |
| Peak Brightness | About 550lux (at 10cm distance) |
| Material | ABC+PC |
| Input | 5V |
| Weight | About 13g |
| Dimensions | 75 × 34 × 13mm |
7. User Tips
- Quality and Build: Users consistently praise the VB4 for its excellent build quality and sturdy construction, offering great value for money.
- Ease of Use: Many find the gimbal very easy to use, making it suitable for beginners.
- App Experience: While the gimbal itself is highly rated, some users express a desire for a more refined or feature-rich companion app.
- Learning Curve: For advanced features or specific modes, some users suggest consulting online resources like blogs or tutorials, especially if the manual is not in their native language.
- Video Quality: If you are looking to improve video quality, explore the various shooting modes and settings available in the Feiyu ON App.
- Smartphone Compatibility: The gimbal is compatible with a wide range of smartphones, including iPhone 15/14/13/12/11/X/8 series, Samsung Galaxy S23/S22/S21/S20/S10 series, Xiaomi 14/13/12/Redmi Note series, Huawei Mate/P/Nova series, Google Pixel series, Realme V/GT/Q/X series, and OnePlus 11/Ace series. Ensure your phone's width is ≤ 88mm.
- Phone Case: It is recommended to remove your phone case before mounting the smartphone on the gimbal for optimal balance and performance.
8. Warranty and Support
For warranty claims, technical support, or any product-related inquiries, please contact FeiyuTech directly.
- Company: Guilin Feiyu Technology Incorporated Company
- Website: www.feiyu-tech.cn
- Email: support@feiyu-tech.com
- Phone: +86 773-2320865
This document is subject to change without notice. The latest version of the manual can often be found on the official FeiyuTech website.
A PDF version of the user manual is available for download from the seller's page: User Manual (PDF).
9. Safety Information
- Ensure the motor is not blocked by external force when the product is powered on.
- Do not allow the product to contact water or other liquids unless it is specifically marked as waterproof or splash-proof. Avoid sea water or corrosive liquids.
- Do not disassemble the product unless explicitly marked as detachable. Repairs should only be performed by FeiyuTech after-sales or authorized service centers. Unauthorized disassembly may void warranty and incur repair costs.
- Prolonged continuous operation may cause the product surface temperature to rise. Operate with care.
- Do not drop or strike the product. If the product exhibits abnormal behavior, contact FeiyuTech after-sales support.
10. Regulatory Information
10.1 IC Warning
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
10.2 FCC Regulatory Conformance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
10.3 RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.