1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your Tedeligo Wireless Remote Control Plug Socket and Magnetic Wall Switch. This system allows for convenient wireless control of various home appliances such as lights, fans, and lamps, offering flexibility and ease of use.
Image: Overview of the Tedeligo Wireless Remote Control Plug Socket and Magnetic Wall Switch.
2. Product Components
The product package typically includes the following components:
- RF Socket (Receiver): The plug-in unit that connects to your appliance.
- Magnetic Wall Switch (Remote Transmitter): A portable or wall-mounted remote control with multiple buttons.
Image: Tedeligo RF Socket and Wall Switch.
3. Specifications
3.1. RF Socket (Receiver)
| Feature | Specification |
|---|---|
| Working Voltage | AC 85-265V (50-60Hz) |
| Max Load | 3000W |
| Max Current | 16A |
| RF Frequency | 433MHz / 433.92MHz |
| Code Type | 1527 Learning Code (EV1527) / 2262 Fixed Code |
| Dimensions | 80*50*50 mm |
| Modulation | ASK |
| Operating Mode | Toggle (Press ON, press again OFF) / Latched Mode |
| Quiescent Current | <5mA |
| Working Temperature | -30~+80℃ |
| Receiving Sensitivity | >-97dbm |
| Storage Remote Controls | Up to 20 pieces |
| RF Operating Mode | ASK Superheterodyne Wireless Reception |
| Remote Range | 10-30m indoors, up to 50m in open space |
3.2. Remote Transmitter (Magnetic Wall Switch)
| Feature | Specification |
|---|---|
| Wall Panel Size | 86*86 mm |
| Wall Remote Size | 80*60 mm |
| Battery | 2*CR2016 (Included) |
| Remote Range | Up to 10-30m |
| Material | Plastic |
| Working Voltage | 3V |
| Feature | Has base and magnetic |
Image: Dimensions of the wall remote and battery type.
4. Setup and Pairing
Before pairing, ensure the LED indicator on the socket is in the OFF state. If you wish to change the operating mode of a remote control, you must first reset the socket. After a reset, all previously paired remote controls will no longer function.
4.1. Toggle Mode Pairing
In Toggle Mode, one press turns the socket ON, and another press of the same button turns it OFF.
- Plug in the RF Socket. Ensure its LED indicator is OFF.
- Press and hold the learning button on the socket until the indicator light turns ON. Release the button immediately after it lights up. (Do not wait for it to go off and on again, otherwise pairing will fail.)
- Press the desired ON/OFF button on your remote control once. The pairing is now complete.
4.2. Latched Mode Pairing (Requires ≥2 buttons on the remote)
In Latched Mode, one button turns the socket ON, and a different button turns it OFF.
- Plug in the RF Socket. Ensure its LED indicator is OFF.
- Press and hold the learning button on the socket until the indicator light turns ON, then goes OFF, and then lights up again. Release the button immediately at this point.
- Press button "A" on your remote control once.
- Then, press button "B" on your remote control once. The pairing is now complete.
4.3. Reset / Delete Pairing
To clear all paired remote controls from the socket:
- Press and hold the learning button on the socket.
- Continue holding until the indicator light turns on and flashes continuously (or flashes several times over approximately 10 seconds).
- Release the button. The code clearing is successful, and all previous pairings are deleted.
Image: Visual guide for pairing and deleting remote controls.
5. Operating Modes
The Tedeligo system supports two primary operating modes:
- Toggle Mode: Press the remote button once to turn the connected appliance ON. Press the same button again to turn the appliance OFF.
- Latched Mode: Press button 'A' on the remote to turn the connected appliance ON. Press button 'B' on the remote to turn the appliance OFF. This mode requires a remote with at least two distinct buttons.
Image: Remote control in use with a coffee maker, demonstrating wireless operation.
6. Installation
The magnetic wall switch offers flexible installation options:
- Magnetic Attachment: The remote control itself is magnetic and can be attached to metallic surfaces like a refrigerator.
- Wall Mounting: The switch comes with a base that can be affixed to a wall using adhesive or screws. The magnetic remote then snaps into this base, allowing it to be easily removed for handheld use.
Image: Magnetic wall switch installation options, showing attachment to a wall base and a refrigerator.
7. Multi-Control Scenarios
The Tedeligo system supports various multi-control configurations:
- One Wall Switch Controls Multiple Sockets: A single wall switch can be paired to control up to three individual RF sockets.
- One Button Controls Multiple Sockets: A single ON/OFF button on a remote can be configured to control multiple RF sockets simultaneously.
- Multiple Wall Switches Control One Socket: Up to 5 wall switches can be paired to control a single RF socket, providing control from different locations.
Image: Diagram illustrating various multi-control scenarios, including one switch controlling multiple sockets and multiple switches controlling one socket.
Image: Multiple wall switches controlling one socket.
Image: Remote controlling multiple devices (fan, lamp, TV, speakers) in a living room.
8. Troubleshooting
- Pairing Failure: Ensure the socket's LED indicator is off before starting the pairing process. During pairing, release the learning button immediately at the specified indicator light state (e.g., when it first lights up for Toggle mode, or after the second light-up for Latched mode). Incorrect timing can lead to pairing failure.
- Intermittent Operation / Poor Communication: If the socket sometimes works and sometimes doesn't, or requires multiple presses, try resetting the socket and re-pairing the remote. Ensure the remote control's battery voltage is not low; replace the 2*CR2016 batteries if necessary for stronger signal transmission.
- Remote Not Working After Reset: This is normal. After a reset, all previous pairings are cleared. You must re-pair all desired remote controls with the socket.
- Socket Not Responding: Check if the socket is receiving power. Verify that the remote control's battery is not depleted. Ensure the remote is within the effective operating range (10-30m indoors).
- Socket Default State After Power Outage: The socket defaults to the OFF state after a power interruption and subsequent restoration. It will not automatically turn ON.
- Using Other RF Remotes: While the frequency (433MHz) might be the same, different RF products often use various encoding schemes. It is not guaranteed that non-Tedeligo remotes will work with this socket.
- No Wi-Fi Functionality: This product is RF-only and does not support Wi-Fi connectivity.
9. Maintenance
- Battery Replacement: The wall remote uses 2*CR2016 batteries. If the remote's signal weakens or stops responding, replace the batteries promptly to ensure optimal performance and signal strength.
- Cleaning: Wipe the surfaces of the socket and remote control with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Environmental Conditions: Avoid exposing the devices to extreme temperatures, humidity, or direct sunlight.
10. User Tips
- For optimal signal transmission and reliable operation, always ensure the remote control's batteries are fresh.
- If you need to change the operating mode (Toggle or Latched) for a remote, remember to perform a full reset on the socket first.
- When positioning the wall switch, consider the indoor remote range of 10-30 meters to ensure consistent control.
- The socket's default OFF state after a power outage can be a useful safety feature for certain appliances, preventing them from turning on unexpectedly.
- The receiver can store up to 20 remote controls, allowing for extensive multi-point control within your home.
11. Warranty and Support
This product comes with a 1-year warranty for the wireless socket plug and magnetic wall switch.
For any questions, issues, or support needs, please contact:
- Email: dieseelectronic@163.com
- WhatsApp: +86 135 0227 8583 / +86 181 3880 5271
- Address: Room 03, 12th Floor, Building T19, East Coast Garden, Fangzhilonghuwan, No. 27, Sanhuan South Road, Huicheng District, Huizhou City, Guangdong Province, China 516001
- Brand Owner: Huizhou Wenqiao Electronic Technology Co., Ltd.
12. Certifications
The Tedeligo Wireless Remote Control Plug Socket and Magnetic Wall Switch products have passed the following certifications:
- CE
- CCC
- RoHS
Image: Certifications for Tedeligo products.