Facom R.235

Contents

Facom R.235 Adapter 1/4" with Locking Ring - Instruction Manual

High Quality Materials and Precision Craftsmanship

Introduction

The Facom R.235 Adapter is a high-quality tool designed to securely hold 1/4" series 1 bits (6.35 mm drive) for various applications. Constructed from durable Chrome-vanadium Steel, this adapter features a standard clip locking mechanism for frequent bit removal and reliable performance. Its precision craftsmanship ensures extended service life in commercial and professional environments.

Facom R.235 Adapter, front view

Figure 1: Facom R.235 Adapter, showing its chrome finish and 1/4" drive opening.

Setup and Installation

This adapter is designed for use with 1/4" (6.35 mm) drive tools and compatible bits. Follow these steps for proper setup:

  1. Select the Correct Bit: Ensure you are using a 1/4" series 1 bit that is appropriate for your task.
  2. Insert the Bit: Align the hexagonal base of the bit with the opening of the Facom R.235 adapter. Push the bit firmly into the adapter until it clicks into place. The standard clip mechanism will engage, securing the bit.
  3. Attach to Drive Tool: Insert the square drive end of the adapter into your 1/4" drive ratchet, screwdriver handle, or power tool. Ensure it is fully seated and locked if your drive tool has a locking mechanism.
Diagram showing bit insertion into Facom R.235 adapter

Figure 2: Bit Insertion Diagram. This diagram illustrates the correct method for inserting a 1/4" bit into the adapter, showing the secure fit within the hexagonal recess and the internal locking mechanism.

Diagram showing adapter with bit inserted and locking mechanism

Figure 3: Adapter with Bit Engaged. This image shows a bit fully inserted into the adapter, highlighting the secure engagement provided by the internal clip mechanism, ready for use.

Operating Instructions

The Facom R.235 adapter is designed for straightforward operation with its standard clip mechanism, ideal for tasks requiring frequent bit changes.

  • Bit Retention: Once a bit is inserted, the internal clip holds it securely during use, preventing accidental dislodgement.
  • Bit Removal: To remove a bit, simply pull it firmly out of the adapter. The standard clip is designed to release the bit with moderate force.
  • Application: Use the adapter with appropriate torque settings for your drive tool and the task at hand. Avoid excessive force that could damage the bit, adapter, or fastener. Always ensure the bit is fully seated before applying torque.

Maintenance

Proper maintenance will ensure the longevity and optimal performance of your Facom R.235 adapter.

  • Cleaning: After each use, wipe the adapter clean with a dry cloth to remove any dirt, grease, or debris. For stubborn grime, a mild, non-corrosive solvent can be used, ensuring the adapter is thoroughly dried afterward to prevent rust.
  • Inspection: Periodically inspect the adapter for any signs of wear, damage, or deformation, especially around the bit retention area and the drive square. Check for any cracks, chips, or excessive play.
  • Lubrication: No specific lubrication is required for this adapter's internal mechanism.
  • Storage: Store the adapter in a dry environment, away from corrosive materials, excessive humidity, and extreme temperatures, to prevent rust and material degradation.

Troubleshooting

If you encounter issues with your Facom R.235 adapter, consider the following:

  • Bit Not Holding Securely:
    • Ensure the bit is fully inserted until the internal clip engages with an audible click or firm seating.
    • Check if the bit itself is damaged, worn, or out of specification, preventing proper engagement.
    • Inspect the internal clip mechanism of the adapter for any visible damage, deformation, or obstruction. If the clip is damaged, the adapter may need replacement.
  • Difficulty Inserting/Removing Bit:
    • Ensure the bit and the adapter's opening are clean and free of debris, rust, or foreign objects.
    • Verify that the bit is the correct 1/4" hexagonal type.
    • Avoid forcing bits; if resistance is met, re-check alignment and cleanliness.

Specifications

FeatureDetail
Model NumberR.235
TypeHand Tool Parts
MaterialChrome-vanadium Steel
Bit Compatibility1/4" Series 1 (6.35 mm hexagonal)
Drive Size1/4" Square Drive
Locking MechanismStandard Clip (for frequent removal)
Intended UseCommercial Manufacture
OriginDe(origin)
Diagram showing dimensions of Facom R.235 adapter

Figure 4: Dimensional Diagram. This diagram provides key measurements of the Facom R.235 adapter, including its overall length and diameter, for precise application matching.

Diagram showing compatibility of Facom R.235 adapter with different bit types

Figure 5: Bit Compatibility. This diagram illustrates the types of 1/4" bits that are compatible with the Facom R.235 adapter, ensuring proper fit and function.

User Tips

  • Understand the Locking Mechanism: The R.235 model features a standard clip for frequent bit changes. Ensure the bit is fully seated to engage this clip for secure operation. This

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.