POLVCDG X10 Bone Conduction Bluetooth Earphones

Introduction

The POLVCDG X10 Bone Conduction Bluetooth Earphones are designed for versatile use, offering a unique listening experience by transmitting sound through your cheekbones. Featuring IPX8 waterproofing, 32GB of built-in memory for MP3 playback, and Bluetooth 5.3 connectivity, these earphones are ideal for sports, swimming, and daily activities. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.

Package Contents

Please check the box for the following items:

• POLVCDG X10 Bone Conduction Earphones
• Instruction Manual
• Magnetic Charger
• Accessory Box
• Brand Introduction Book

Wearing Instructions

Hang the headphones behind your neck with the speakers on both sides against your cheekbone to adjust the comfort level of wearing them. The correct position for the speaker is on the cheekbone in front of the ear; do not place the speaker inside the ear canal.

Setup

Charging the Battery

Before first use, fully charge the earphones. The headset uses a built-in non-removable rechargeable battery. Do not attempt to remove the battery.

1. Connect the magnetic charger to the charging port on the earphones.
2. Plug the charger into an AC power outlet.
3. When charging, the display percentage indicates the charge level. The display percentage end digit flashes.
4. The headset will be turned off during charging and cannot be turned on.
5. When the headset shows 10% or less battery and you hear a low battery tone, please charge it. Continuing to use it will cause it to automatically shut down.

Warning:

• Only use approved chargers with this package. Using other chargers may violate approval and warranty terms and could be dangerous.
• Recommended charger output voltage: DC5V +/-0.25V, output current: 100mA-500mA. Higher voltage may damage the Bluetooth headset.
• Do not subject the product to serious collision or impact, as this may damage the electronic motherboard and battery.

Bluetooth Connection

1. Power On: Press and hold the Right button for 3 seconds. You will hear a "power on" tone.
2. Pairing Mode: After powering on, the headset automatically enters search pairing mode. The LED display "Bluetooth" flashes.
3. Connect: On your mobile phone, desktop computer, or laptop, search for "X10 (Bluetooth)" in the Bluetooth settings and manually click to connect.
4. Pairing Successful: Once connected, you will hear a "Bluetooth connected" beep.

Downloading Music to Internal Memory (MP3 Mode)

The X10 earphones feature 32GB of built-in memory for MP3 playback, allowing you to listen to music without a mobile phone.

1. Connect the headset to your computer using the provided data cable.
2. A U-disk (removable drive) should automatically appear on your computer. Open it.
3. Drag and drop your MP3 or WAV format music files into the U-disk folder.
4. Once files are transferred, safely eject the U-disk from your computer.

Operating Instructions

The X10 earphones have multi-functional control buttons for easy operation. Refer to the diagram below for button locations.

• Power On: Long press the Right button for 3 seconds. (Tone: "power on")
• Shutdown: Long press the Right button for 5 seconds. (Tone: "Bluetooth off")
• Disconnect Bluetooth: The phone actively disconnects Bluetooth. (Bluetooth flashing)
• Pause/Play: In Bluetooth connection status, click the Right button to play/pause music.
• Answer/Hang Up/Reject Call:
  • Answer: Click the Right button during an incoming call.
  • Reject: Press and hold the Right button for 2 seconds during an incoming call.
  • Hang Up: Click the Right button during a call.
• Volume Increase: Double-click the Left button to increase volume by one level.
• Volume Decrease: Click the Left button to decrease volume by one level.
• Next Song: Triple-click the Right button in music mode.
• Previous Song: Triple-click the Left button in music mode.
• Voice Assistant: (After connecting Bluetooth, without an active call) Long press the Left button for 2 seconds to enter voice mode. Long press again for 2 seconds to exit.

  *Note: For Android, "Bluetooth headset press key to start" needs to be enabled in the voice assistant settings. For iOS, close background apps to enable Siri function.

TF Card Functionality (MP3 Mode)

The X10 earphones support TF card playback for MP3/WAV format music files.

• Switching Modes:
  • In any state, double-click the Right button to switch between Bluetooth mode and TF card mode. You will hear a beep indicating a successful switch.
  • When in Bluetooth playback, double-clicking the Right button will switch to TF card playback. The display will show "Bluetooth light / TF card mode beep".
  • When in TF card playback, double-clicking the Right button will switch back to Bluetooth playback.
• Supported Formats: The TF card function only supports MP3/WAV format music.

Specifications

Important Notes and Safety Information

• The correct position of the speaker of this headset is the cheekbone in front of the ear; please do not place the speaker in the ear canal.
• Long-term listening to loud music may cause discomfort. Please use at medium volume if possible, and avoid prolonged use at high volumes.
• Using headphones will affect your perception of your surroundings regardless of the volume level, so pay attention when using them, especially in environments requiring awareness.
• Do not throw, sit on, or immerse the headset in salt water. Keep the headset away from fire and high voltage equipment.
• Not suitable for children under three years old, as it contains small parts.
• Do not dispose of as household waste. Please take it to the appropriate local electrical and electronic equipment recycling station.
• The company does not assume any responsibility for personal property damage caused by violating the above warning content.

User Tips

• For swimming, ensure the earphones are securely fitted to prevent water ingress and maintain sound quality.
• To maximize battery life, charge the earphones fully before extended use, especially for long sports sessions.
• When switching between Bluetooth and MP3 modes, listen for the confirmation beep to ensure the mode change was successful.

Troubleshooting

• Earphones not powering on: Ensure the battery is charged. If charging, the earphones cannot be powered on. Disconnect from charger and try again.
• Cannot connect via Bluetooth:
  1. Ensure the earphones are in pairing mode (LED display "Bluetooth" flashing).
  2. Check that Bluetooth is enabled on your device (phone, computer).
  3. Forget "X10 (Bluetooth)" from your device's Bluetooth list and try pairing again.
  4. Ensure the earphones are not connected to another device.
• No sound in MP3 mode:
  1. Ensure the earphones are successfully switched to TF card mode (double-click Right button).
  2. Verify that music files are in MP3 or WAV format and correctly transferred to the internal 32GB memory.
  3. Check volume levels on the earphones.
• Voice Assistant not activating:
  1. Ensure Bluetooth is connected and there is no active call.
  2. For Android, check if "Bluetooth headset press key to start" is enabled in your voice assistant settings.
  3. For iOS, try closing background applications before attempting to activate Siri.

Maintenance

• Cleaning: Wipe the earphones with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Storage: When not in use for extended periods, store the earphones in a dry and ventilated place.
• Battery Care: To maintain battery health during long-term non-use, charge the earphones once every two months.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official POLVCDG website or contact your retailer. Keep your proof of purchase for any warranty claims.

A user manual in PDF format may be available for download from the official product page or by contacting customer support. (Reference: User manual (PDF))

Frequently Asked Questions (FAQ)

Q: Does someone have a link to the English manual in PDF format?

A: Yes, an English user manual in PDF format is available. You can often find it on the product's official support page or by contacting the seller directly. A link to the PDF is provided in the Warranty and Support section of this manual.