POLVCDG X10 Bone Conduction Bluetooth Headset User Manual

Introduction

This manual provides detailed instructions for the POLVCDG X10 Bone Conduction Bluetooth Headset. Designed for sports and active lifestyles, these headphones feature advanced bone conduction technology, IPX8 waterproofing, and built-in memory for music playback without a phone. Please read this manual carefully before use to ensure proper operation and longevity of your device.

Product Overview

The POLVCDG X10 features an ergonomic design for comfortable wear during various activities, including swimming. It integrates bone conduction technology for open-ear listening, allowing you to stay aware of your surroundings.

Key Features:

• IPX8 Waterproofing: Suitable for swimming and diving up to 30 meters depth.
• Bone Conduction Technology: Delivers sound through your cheekbones, leaving your ears open.
• Built-in 32GB Memory: Store a large number of MP3/WAV songs for phone-free music playback.
• Bluetooth 5.3: Stable and fast wireless connection.
• Digital Display: Real-time battery level and mode indication.
• Long Battery Life: Up to 10 hours of music playback.
• Magnetic Fast Charging: Quick and convenient charging.
• ENC Call Noise Reduction: Clearer calls by suppressing environmental noise.
• Comfortable Design: Soft, skin-friendly silicone material and stable ear hooks.

Components:

1. Magnetic charging port
2. Microphone hole
3. Right button (Multi-function button)
4. Left button
5. Display screen

Setup

Wearing Instructions:

Hang the headphones behind your neck with the speakers on both sides against your cheekbone to adjust the comfort level of wearing them. The correct position of the speaker is the cheekbone in front of the ear; do not place the speaker in the ear.

Charging the Battery:

Before using any charger, ensure its specifications meet the requirements: recommended output voltage DC5V +/-0.25V, output current 100mA-500mA. Using a charger with too high voltage may damage the Bluetooth headset. Do not use a fast charger.

• When the headset is charged using the 5V charging cradle, the headset will be turned off and cannot be turned on. The display percentage's last digit will flash.
• During charging, the percentage displayed represents the current charge level.
• When the headset's display shows 10% or less, and you hear a low battery tone, it indicates insufficient power. Charge the headset promptly to avoid automatic shutdown.
• Plug the charger into an AC power outlet.

Bluetooth Connection:

1. Power On: Press and hold the right button for 3 seconds until you hear "power on". The headset will enter pairing mode, and the LED display will show flashing Bluetooth.
2. Pairing: On your mobile phone, desktop computer, or laptop, search for "X10 (Bluetooth)" in the Bluetooth settings.
3. Connect: Manually click to connect. For the first-time connection, you must manually click to pair. Once connected, you will hear a "Bluetooth has been connected" beep.
4. Disconnect: To disconnect, actively turn off Bluetooth on your phone, or the headset's Bluetooth will flash.

Operating Instructions

Button Functions:

The headset features multi-functional control buttons for various operations.

• Power On: Press and hold the right button for 3 seconds. (Prompt sound: "Power on")
• Shutdown: When the headset is on, press and hold the right button for 5 seconds. (Prompt sound: "Bluetooth is turned off")
• Pause/Play: In Bluetooth connection status, click the right button to play. When music is playing, click the right button to pause.
• Answer/Hang Up/Reject Call:
  • Incoming call: Click the right button to answer.
  • Incoming call: Press and hold the right button for 2 seconds to reject.
  • During a call: Click the right button to hang up.
• Volume Increase: In music or call mode, double-click the left button to increase the volume by one step.
• Volume Reduction: In music or call mode, click the left button to reduce the volume by one step.
• Next Song: In music mode, triple-click the right button to play the next song.
• Previous Song: In music mode, triple-click the left button to play the previous song.
• Voice Assistant: (After connecting via Bluetooth, and no call is active) Press and hold the left button for 2 seconds to enter voice mode, and press and hold again for 2 seconds to exit.
  • Note for Android: You need to enable "Bluetooth headset press key to start" in the voice assistant settings.
  • Note for iOS: You need to close background apps to open Siri functionality.

TF Card Function (MP3 Mode):

The headset's TF card function supports MP3/WAV format music only.

1. Switching Modes: In any state, double-click the right button to switch between Bluetooth mode and TF card mode. You will hear a beep indicating successful switching.
2. From Bluetooth to TF Card: While in Bluetooth playback, double-click the right button. The display will show "Bluetooth light / TF card mode beep" indicating the switch to TF card playback.
3. From TF Card to Bluetooth: While in TF card playback, double-click the right multi-function key. The display will show "Bluetooth mode beep" indicating the switch to Bluetooth playback.

How to Download Music to Built-in Memory:

1. Connect the headset to your computer using the complimentary data cable.
2. A U-disk (removable drive) will automatically pop up on your computer. Open it.
3. Open a music software (e.g., NetEase Cloud Music) and search for the song you wish to download. Click download, then locate the downloaded MP3 file.
4. Drag and drop the downloaded MP3 format songs into the U-disk folder.

Maintenance

General Care:

• Do not soak the earphones in seawater or saltwater for extended periods. After use in such environments, rinse immediately with clean water and dry thoroughly. The charging magnetic part is particularly susceptible to corrosion.
• After each exercise session, clean any water from the surface of the earphones, especially around the charging magnet position. This prevents sweat and saltwater from corroding components and entering the device, which can affect its service life.
• Keep the product away from fire, high temperatures, freezing conditions, and harsh chemicals.
• Strictly prohibit violent impact, disassembly, or extrusion of the product.

Battery Care:

• The headset contains a built-in, non-removable rechargeable battery. Do not attempt to remove the battery, as this may damage the headset.
• If the headset will not be used for a long time, store it in a dry and well-ventilated place. Charge it fully at least once every two months to maintain battery health.

Troubleshooting

If you encounter any issues with your POLVCDG X10 headset, please consider the following common solutions:

• Headset not turning on/charging: Ensure the charging cable is properly connected and the charger meets the specified voltage/current (DC5V +/-0.25V, 100mA-500mA). Avoid using fast chargers.
• Bluetooth connection issues: Ensure the headset is in pairing mode (LED Bluetooth flashing) and manually select "X10 (Bluetooth)" from your device's Bluetooth settings for the first connection.
• Low battery warning/automatic shutdown: Charge the headset immediately when the display shows 10% or less battery or you hear a low battery tone.
• Sound quality issues or discomfort: Ensure the speakers are positioned correctly on your cheekbones, not inside your ears. Use a medium volume level to prevent discomfort and maintain awareness of your surroundings.
• TF card music not playing: Verify that the music files are in MP3 or WAV format.

For persistent problems, please contact customer support for assistance. Do not attempt to disassemble or repair the device yourself, as this may void your warranty and cause further damage.

Specifications

Safety Warnings and Important Notes

• Wearing Position: Ensure the headset speakers are positioned on your cheekbones, not inside your ears.
• Volume Control: Prolonged listening at high volumes may cause discomfort. Use a medium volume level whenever possible to avoid long-term high-volume exposure.
• Environmental Awareness: Using headphones, regardless of volume, will affect your perception of surroundings. Exercise caution and pay attention to your environment when wearing headphones.
• Physical Handling: Do not throw, sit on, or immerse the headset in saltwater. Keep the headset away from fire, high voltage equipment, and extreme temperatures (freezing).
• Children's Safety: This product is not suitable for children under three years old due to small parts.
• Disposal: Do not dispose of the headset as household waste. Take it to an appropriate local electrical and electronic equipment recycling station.
• Charger Compatibility: Only use approved chargers with the specified output (DC5V +/-0.25V, 100mA-500mA). Using unapproved chargers or fast chargers may violate warranty terms, pose a danger, and damage the electronic motherboard and battery.
• Impact Warning: Avoid serious collision with this product, as severe impact may damage internal components.
• Disclaimer: The company does not assume responsibility for personal or property damage caused by violating the above warning contents.

Warranty and Support

The POLVCDG X10 Bone Conduction Bluetooth Headset comes with standard consumer protections. For specific warranty details, please refer to the purchase agreement or contact your retailer.

If you encounter any problems or require technical assistance, please contact the seller or manufacturer's customer support directly. Do not attempt to repair the device yourself, as this may void your warranty.

AliExpress offers free returns within 90 days and fast delivery guarantees, including a $1.00 coupon if delivery is delayed, and refunds for lost or damaged packages. Please refer to the AliExpress platform for full details on these services.