1. Introduction
This manual provides detailed instructions for the COOSPO H6 and H9Z Chest Heart Rate Monitors. These devices are designed to accurately track your heart rate during various physical activities, offering real-time data for improved training efficiency and performance monitoring. Both models feature dual-mode connectivity (Bluetooth and ANT+) for broad compatibility with fitness equipment, smart devices, and third-party applications.

Image: COOSPO H6/H9Z Chest Heart Rate Monitor.
2. Included Components
Please check the package contents upon unboxing:
- For H6 Model:
- Chest Strap x 1
- CooSpo Heart Rate Monitor Sensor x 1
- User Manual x 1
- For H9Z Model:
- Chest Strap x 1
- CooSpo Heart Rate Monitor Sensor x 1
- User Manual x 1
- Battery Charger x 1
Package Weight: 0.09 Kilograms
Item Package Dimensions: 25.98 x 14.96 x 5.71 inches
3. Setup Instructions
3.1 Attaching the Sensor to the Chest Strap
- Snap the heart rate monitor sensor onto the chest strap electrodes. Ensure it is securely fastened.
3.2 Wearing the Chest Strap
- Moisten the plastic electrode areas on the back of the chest strap with water or electrode gel. This improves conductivity and ensures accurate heart rate detection.
- Place the chest strap directly against your skin, just below your pectoral muscles. The sensor should be centered on your chest.
- Adjust the strap length (65-95cm) for a snug but comfortable fit. It should be tight enough to stay in place during exercise but not restrict breathing.

Image: Proper placement and adjustment of the chest strap.
3.3 Initial Pairing and Connection
- Activate the sensor by wearing it.
- Open your preferred fitness application (e.g., Strava, Wahoo Fitness, Zwift) or turn on your compatible device (e.g., Garmin/CooSpo bike computer, sports watch).
- Important: Connect the heart rate sensor within the application or device settings, not directly through your phone's Bluetooth settings. The Bluetooth name will typically appear as "H6M-******" or similar.
- Once connected, your real-time heart rate data will be displayed.

Image: Connectivity options for the heart rate monitor.
4. Operating Instructions
The COOSPO H6/H9Z heart rate monitor provides accurate, real-time heart rate data to enhance your exercise and training.
4.1 Real-time Heart Rate Tracking
- The sensor continuously tracks your heart rate with ±1 BPM accuracy.
- This data is transmitted wirelessly via Bluetooth (H6: 4.0, H9Z: 5.0) and ANT+ to your connected device or application.
- Monitor your heart rate zones to optimize your workout intensity for specific goals such as fat burning, aerobic fitness, or recovery.

Image: Heart Rate Zone Guide for scientific exercise.
4.2 Compatibility
The monitor offers strong compatibility with a wide range of devices and applications:
- Third-Party Apps: Works with popular fitness apps such as Strava, Wahoo Fitness, Polar Beat, DDP Yoga, HR Monitor, Openrider, Zwift, Runtastic, Coosporide, and many others.
- Bike Computers: Compatible with Garmin, CooSpo, and other GPS bike computers.
- Sports Watches: Connects with most BLE (Bluetooth Low Energy) / ANT+ enabled sports watches.
- Gym Equipment: Directly compatible with equipment like Peloton bikes, Concept2, Nordic treadmills, Bowflex Max Trainers, Pro-Form treadmills, iFIT treadmills, and Echelon.

Image: Strong compatibility with various devices and applications.
5. Maintenance
5.1 Cleaning the Chest Strap
- After each use, detach the sensor from the chest strap.
- Rinse the chest strap under running water and hang it to dry. Do not machine wash or tumble dry.
- Avoid using strong detergents or chemicals, as these can damage the electrodes.
5.2 Battery Information
- H6 Model: Uses a replaceable CR2032 coin cell battery. With 1 hour of exercise per day, the battery can last approximately 300 hours. To replace, open the battery compartment on the sensor, remove the old battery, and insert a new CR2032 with the positive (+) side facing up.
- H9Z Model: Features a built-in Lithium battery (70 mAh) and is charged via magnetic USB. Connect the magnetic charger to the sensor's charging port.

Image: H6 sensor battery compartment and IP67 rating.
5.3 Waterproof Rating
- Both H6 and H9Z models are IP67 waterproof. This means they are protected from dust and can withstand immersion in water up to 1 meter for 30 minutes.
- Important: The device is suitable for daily life activities, rainy day training, and is workable in sweat. However, it is not suitable for swimming and should not be soaked in water for extended periods.

Image: IP67 waterproof rating for daily use and various sports.
6. Troubleshooting
- No Heart Rate Reading:
- Ensure the electrode areas on the chest strap are moistened.
- Check that the sensor is securely snapped onto the strap and positioned correctly on your chest.
- Verify the battery (H6) or charge level (H9Z).
- Connection Issues:
- Make sure you are connecting the sensor within your fitness app or device settings, not directly through your phone's Bluetooth menu.
- Ensure Bluetooth and/or ANT+ is enabled on your receiving device.
- Try restarting your device or application.
- Ensure no other devices are actively paired with the sensor.
- Inaccurate Readings:
- Re-moisten the electrodes.
- Adjust the strap for a tighter fit.
- Environmental factors or interference from other electronic devices can sometimes affect accuracy.
- Compatibility Questions:
- The device is compatible with most Bluetooth Low Energy (BLE) and ANT+ enabled devices and apps. For specific models like Garmin Edge 800, Coospo BC 200, iGSPORT, or Polar M460, ensure they support standard BLE or ANT+ heart rate profiles.
7. Specifications
| Specification | H6 Model | H9Z Model |
|---|---|---|
| Heart rate monitor type | Chest | Chest |
| Material | ABS | ABS |
| Dimensions (Sensor+Strap) | 60 x 33.8 x 12.2 mm | 58.42 x 25.4 x 10.16 mm |
| Weight (Sensor+Strap) | 46.4g | 43g |
| Waterproof level | IP67 | IP67 |
| Wireless connections | Bluetooth & ANT+ | Bluetooth 5.0 & ANT+ |
| Wireless signal strength | ANT+: 7 m, Bluetooth: 10 m | ANT+: 7 m, Bluetooth: 10 m |
| Mobile phone compatibility | iPhone & Android | iPhone & Android |
| Third-party App compatibility | Yes | Yes |
| Heart rate tracking | Yes | Yes |
| HRV | Available | Available |
| Charging method | Replacement battery | Magnetic USB Charging |
| Battery | CR2032 | Lithium battery, 70 mAh |
| Memory | No | No |

Image: Detailed specifications for H6 and H9Z models.
8. User Tips
- For optimal performance and accurate readings, always remember to moisten the electrode areas of the chest strap before wearing it.
- When connecting to your smartphone, ensure you pair the heart rate sensor directly within your fitness application (e.g., Wahoo Fitness, Zwift) rather than through the phone's general Bluetooth settings. The sensor's Bluetooth name will typically start with "H6M-".
- To prolong battery life and maintain the strap's condition, always separate the sensor from the chest strap after each exercise session.
- If you experience connection issues with specific devices (e.g., Garmin, Polar, iGSPORT), verify that your device supports standard Bluetooth Low Energy (BLE) or ANT+ heart rate profiles.
9. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please refer to the official COOSPO website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.