SUSWE 750W VFD Frequency Converter

Contents

SUSWE 750W VFD Frequency Converter Instruction Manual

Model: 750W VFD Frequency Converter

Brand: SUSWE

1. Product Overview

The SUSWE 750W VFD (Variable Frequency Drive) Frequency Converter is a vector overload type inverter designed for precise control of AC motor drives. It efficiently converts single-phase 200V-240V AC input into three-phase 200V-240V AC output, enabling variable speed regulation for compatible motors. This device is ideal for applications requiring motor fan speed regulation, constant pressure water supply systems, and general industrial equipment where energy saving and power saving are crucial.

Important Note: This VFD is not applicable to single-phase 220V motors. It is designed to drive three-phase motors from a single-phase power supply.

Front view of SUSWE VFD Frequency Converter with control panel
Front view of the SUSWE VFD Frequency Converter, showing the control panel and display. This model offers 1 year warranty and 24-hour one-to-one debugging guidance.

2. Technical Specifications

FeatureSpecification
TypeDC/AC Inverter
Input Voltage1-phase 200V~240V AC
Output Voltage3-phase 200V~240V AC
Output Power750W (0.2kW~0.75kW range)
Input Frequency50/60Hz
Output Frequency Range0~99.0Hz
Output TypeSINGLE
Weight0.51 kg (500g)
Dimensions (L*W*H)130mm * 60.5mm * 102.5mm (approx. 60*100*125 from general spec)
Package Dimensions (L*W*H)35cm * 20cm * 10cm
CertificationCE
CustomizationYes
Dimensional drawing of the VFD Frequency Converter
Dimensional drawing of the VFD, showing its length (130mm), width (60.5mm), and height (102.5mm).

3. Setup and Installation

Before installation, ensure the power supply is disconnected. This VFD is designed for panel mounting with specific opening dimensions.

3.1 Physical Installation

  1. Prepare an opening in your control panel with the following dimensions: 52.5mm (width) x 80mm (height) x 130mm (depth).
  2. Insert the VFD into the prepared opening.
  3. Secure the VFD using appropriate fasteners.
Opening size and wiring diagram for VFD installation
Diagram showing the required opening size for installation (52.5MM*80MM*130MM) and the detailed wiring connections.

3.2 Wiring Connections

Refer to the wiring diagram and terminal labels for correct connections. Ensure all connections are secure and properly insulated.

  • Power Input (L, N, PE): Connect your single-phase 220V AC power supply to the L and N terminals. Connect the ground wire to the PE (Grounded) terminal.
  • Motor Output (U, V, W): Connect the three-phase AC motor to the U, V, and W terminals.
  • Control Terminals:
    • Relay Output (CM, NC, ON): For external control signals.
    • External Sensor (X0, X1, X2, X3): Digital input terminals.
    • 12V/P: 12V power output.
    • Analog Input (AI): 0-5V/0-10V analog input for speed control.
    • 485 Communication (A+, B-): For RS485 communication.
    • GND: Ground for control signals.
    • External 250R Resistor: Match 4-20mA.
    • Y0 Point: A multi-function composite output point, can be used for brake resistor or general transistor output.
Rear view of VFD showing wiring terminals
Rear view of the VFD, clearly showing the wiring terminals and their labels for input, output, and control signals.
Side view of VFD showing cooling fan
Side view of the VFD, highlighting the built-in radiator and cooling fan for efficient heat dissipation.

4. Operating Instructions

The VFD features a user-friendly control panel for easy operation and parameter setting.

4.1 Control Panel Overview

VFD front panel with button functions
Front panel diagram illustrating the functions of each button and the display area.
  • Display Area: Shows frequency, current, and other operational data.
  • RUN/FWD/REV Indicators: Indicate operation status, motor forward rotation, and motor reverse rotation.
  • MODE Key: Function selection, parameter settings.
  • Up/Down Arrows: Parameter setting adjustment.
  • ENTER Key: Confirms selections and enters parameters.
  • JOG Key: Inching operation.
  • RUN Key: Starts the motor.
  • STOP/RESET Key: Stops the motor, resets errors, or exits menus.
  • Potentiometer: Regulates output frequency (speed).

4.2 Basic Operation

  1. Power On: Ensure all wiring is correct before applying power.
  2. Start Motor: Press the RUN key to start the motor.
  3. Adjust Speed: Use the speed regulating potentiometer on the front panel to adjust the motor's speed (output frequency).
  4. Change Direction: Press the appropriate direction key (if available, or configured via parameters) to switch between forward and reverse rotation.
  5. Stop Motor: Press the STOP/RESET key to stop the motor.

4.3 Parameter Setting

The VFD allows for customization of various operational parameters.

  1. Enter Parameter Setting Mode: Press the MODE key.
  2. Navigate Parameters: Use the Up/Down arrow keys to scroll through different parameters.
  3. Modify Parameter Value: Press the ENTER key to select a parameter, then use the Up/Down arrow keys to change its value.
  4. Save and Exit: After modifying, press the ENTER key to save. Press the STOP/RESET key twice to exit the parameter setting mode.

The VFD also supports setting V/F curve functions for special requirements and using the Shift key to view real-time parameters.

Video demonstrating motor wiring for delta connection, single-phase 220V input to the inverter, one-key start, stepless speed regulation via knob, one-key forward/reverse switching, and parameter setting procedure.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your VFD.

  • Cleaning: Keep the VFD clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
  • Ventilation: Ensure proper airflow around the unit. Regularly check that the cooling fan and ventilation slots are not obstructed.
  • Connections: Periodically inspect all wiring connections for tightness and signs of wear or corrosion.
  • Environment: Operate the VFD within its specified environmental conditions (temperature, humidity) to prevent damage.

6. Troubleshooting

If you encounter issues with your VFD, consider the following common troubleshooting steps:

  • No Power/Display: Check the input power supply and all power connections. Ensure the VFD is receiving the correct voltage.
  • Motor Not Running: Verify that the RUN command is active. Check motor wiring and ensure the motor is not overloaded. Review parameter settings for any incorrect configurations.
  • Overload/Error Codes: If an error code appears on the display, consult the full user manual (if available) for specific code meanings and corrective actions. The VFD has an electronic thermal relay function for motor protection.
  • Incorrect Speed: Check the potentiometer setting and ensure the output frequency range is correctly configured in the parameters.
  • Direction Issue: Verify the motor direction setting in the parameters.

For complex issues or if troubleshooting steps do not resolve the problem, contact technical support.

7. Warranty and Support

The SUSWE 750W VFD Frequency Converter comes with a 1-year warranty from the date of purchase.

For technical assistance, debugging guidance, or warranty claims, please contact the FKSI Official Store. They offer 24-hour one-to-one debugging guidance and remote package debugging services.

8. User Tips

  • Motor Compatibility: Always ensure your motor is a three-phase AC motor compatible with the VFD's output voltage (200V-240V AC) and power rating (up to 750W).
  • Parameter Backup: After configuring your VFD, it's a good practice to record your parameter settings for future reference or in case of accidental reset.
  • Cooling: Adequate ventilation is crucial for VFD performance and lifespan. Ensure the built-in fan is clear and the unit is not enclosed in a tight space without proper airflow.
  • Safety First: Always disconnect power before performing any wiring or maintenance to prevent electrical shock.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.