Introduction
The Toocki 67W GaN Charger Power Adapter Socket is a compact and powerful desktop charging station designed to provide efficient power to multiple devices simultaneously. Featuring advanced GaN (Gallium Nitride) technology, it offers a high power output of up to 67W across its USB-C and USB-A ports, alongside a standard AC outlet. This manual provides essential information for the safe and effective use of your device.
Safety Precautions
- Do not expose the device to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the device to strong impacts.
- Do not attempt to disassemble, repair, or modify the charger. This will void the warranty and may cause damage or injury.
- Ensure the total power consumption of connected AC appliances does not exceed 2500W.
- Use only with compatible power outlets (AC100-240V~50/60Hz).
- Keep out of reach of children.
Setup
- Unpack the Charger: Carefully remove the Toocki 67W GaN Charger from its packaging.
- Connect to Power: Plug the charger's integrated 1.5m power cable into a suitable AC wall outlet. The charger is designed for AC100-240V~50/60Hz input.
- Indicator Light: A blue indicator light on the charger will illuminate, indicating it is powered on and ready for use.
- Placement: Place the charging station on a stable, flat surface, ensuring adequate ventilation. Its compact design makes it suitable for desktop or bedside use.
Operating Instructions
The Toocki 67W GaN Charger features two USB-C ports, one USB-A port, and one AC outlet, allowing you to power up to four devices simultaneously.
Connecting Devices
- USB-C Ports (USB-C1/C2): Connect your USB-C compatible devices (e.g., laptops, tablets, smartphones) to either USB-C1 or USB-C2 for fast charging up to 67W.
- USB-A Port: Connect your USB-A compatible devices (e.g., older smartphones, smartwatches, accessories) to the USB-A port for charging up to 22.5W.
- AC Outlet: Plug in any standard AC-powered appliance or device, such as computers, projectors, humidifiers, or other high-power appliances, ensuring the total power does not exceed 2500W.
Smart Power Division
The charger intelligently distributes power across its ports based on the connected devices to ensure optimal charging speeds without overcharging. Refer to the power distribution table below for detailed output specifications when multiple ports are in use.
Multi-Protection System
The charger incorporates a 6-layer multi-protection mechanism to safeguard your devices against various electrical hazards:
- Over Voltage Protection
- Over Current Protection
- Over Power Protection
- Short Circuit Protection
- Over Temperature Protection
- Over Charge Protection
Maintenance
- Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Storage: When not in use, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Avoid bending or crimping the power cable excessively. Do not pull the cable to unplug the charger; always grasp the plug itself.
Troubleshooting
- Device not charging: Ensure the charger is properly plugged into a live AC outlet. Check that the charging cable is securely connected to both the charger and your device. Try a different port or cable to rule out a faulty component.
- Slow charging: Verify that your device supports fast charging protocols (USB PD, Qualcomm Quick Charge) and that you are using a compatible cable. When multiple devices are connected, the power output per port may be reduced due to smart power division.
- Charger feels warm: It is normal for the charger to become warm during operation, especially under heavy load. The built-in over-temperature protection will prevent overheating. If it becomes excessively hot or emits smoke/odor, immediately unplug it and discontinue use.
- AC outlet not working: Ensure the total power of connected AC devices does not exceed 2500W. Check the device you are trying to power.
Specifications
| Feature | Specification |
|---|---|
| Brand | Toocki |
| Model Number | TCT67-C09 |
| Type | Charger & Power Supply |
| Material | PC |
| Color | Black |
| Length (Cable) | 1.5m |
| Rated Current | 10A Max. |
| Rated Voltage | 250V |
| Rated Power (AC Outlet) | 2500W Max |
| Input | AC100-240V~50/60Hz 1.5A Max |
| USB-C1/C2 Output | 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.35A (67W Max) |
| USB-A Output | 4.5V/5A, 5V/4.5A, 9V/2A, 12V/1.5A (22.5W Max) |
| Total Output | 67W Max |
| GaN Technology | Yes |
| Applied Fast Charge Protocols | USB PD, Qualcomm Quick Charge |
| Output Interface | USB-A, 2 USB-C Ports |
| Quality Certification | CE, RoHS, FCC, UL |
| Dimensions (Charger Body) | 116mm x 48mm x 48mm |
| Plug Dimensions | 40mm |
Compatibility
The Toocki 67W GaN Charger is compatible with a wide range of devices supporting various fast charging protocols. This includes, but is not limited to:
- Phones: iPhone 14/13/12 Pro Max, X, XR, Xs, SE, 7, 8 Plus; Huawei Mate/P series; Xiaomi Mi series; Samsung Galaxy S series.
- Tablets: Apple iPad Pro, iPad Air, iPad mini.
- Laptops: Apple MacBook Pro, MacBook Air; Huawei MateBook; Xiaomi Mi Air, Mi Pro.
- AC Appliances: Computers, projectors, displays, TVs, fans, electric kettles (under 2500W).
User Tips
- For optimal fast charging, use high-quality USB-C to USB-C cables that support Power Delivery (PD) for your laptops and tablets.
- When charging multiple devices, prioritize higher-power devices on the USB-C ports for faster results.
- The integrated 1.5m cable provides flexibility for placement, helping to reduce cable clutter on your desk or bedside table.
- This charger is ideal for travel due to its compact size and ability to replace multiple individual chargers.
Warranty and Support
For warranty information, technical support, or any inquiries regarding your Toocki 67W GaN Charger, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for warranty claims.
