1. Introduction
Thank you for choosing the CHNAITEKE Tuya Smart WiFi COB Neon LED Strip Light. This manual provides essential information for the safe and efficient use of your new LED strip light. Please read it thoroughly before installation and operation.
2. Safety Warnings
▲ DANGER
Products must not be covered with insulating or flammable materials to prevent abnormal operation or fire hazards.
▲ ATTENTION
- When installing and inspecting the product, the power supply must be disconnected to prevent electric shock.
- Please use the included power adapter and ensure load matching. The use of other power supplies is prohibited.
- LED strips are not fully waterproof; avoid using them outdoors or in humid environments such as bathrooms. (Unless the product is explicitly labeled as waterproof for outdoor use.)
▲ Important Notes
When testing the product, please unfold it. Do not bend or curl the product during testing to avoid the risk of overheating.
3. Specifications
| Feature | Detail |
|---|---|
| Type | WiFi COB LED Neon Light Strip |
| Input Voltage | DC24V |
| Light Color Options | Warm White (3000K), Natural White (4000K), Cool White (6500K) |
| LED Type | COB |
| LED Quantity | 320 LEDs/Meter |
| Available Lengths | 1M, 2M, 3M, 4M, 5M, 10M |
| App Control | Tuya or Smart Life |
| Strip Dimensions | 11mm x 6mm |
| Material | 100% Pure Silicone Tube (fireproof and waterproof) |
| Power Consumption | 9W/Meter (8.64W/m from product properties) |
| Waterproof Rating | IP67 |
| Luminous Flux | 2000-82000 Lumens |
| Average Life | >50,000 hours (30,000 hours from product properties) |
| Power Source | DC |
| Certifications | CE, FCC, ROHS, UL |
| Smart Device | Yes |
4. Package Contents
- COB LED Neon Light Strip (selected length)
- Smart Controller
- Power Adapter (EU or US Plug, depending on selection)
5. Setup Guide
5.1 Hardware Connection
- Ensure the power adapter is unplugged from the wall outlet.
- Connect the COB LED Neon Light Strip to the smart controller.
- Connect the smart controller to the power adapter.
- Plug the power adapter into a suitable wall outlet.
5.2 App Installation and Pairing
- Download the "Tuya" or "Smart Life" app from your phone's app store.
- Ensure your phone is connected to a 2.4GHz Wi-Fi network. If your router combines 2.4GHz and 5GHz bands, separate them in your router settings to ensure connection to the 2.4GHz band.
- Open the app and set up your account.
- In the app, select "Add Device" > "Lighting devices" and confirm the device.
- Follow the on-screen instructions for Easy Mode or AP Mode (press the on/off button of the device 5 times to enter pairing mode).
6. Operation
6.1 Manual Control
- Pushbutton Switch: Turn the light on or off by pressing the button on the controller.
- Dimmer Switch: The controller supports adjusting light brightness. Use the corresponding control method based on the switch type.
6.2 App Control (Tuya/Smart Life)
Once paired with the app, you can control the LED strip light remotely:
- On/Off: Toggle the power switch in the app.
- Dimming: Adjust the brightness level from 1% to 100%.
- Scene Selection: Choose from predefined scenes like 'Good Night', 'Reading', 'Working', or 'Leisure'.
- Timing Schedules: Set timers to automatically turn the light on/off at specific times daily.
6.3 Voice Control
The LED strip light is compatible with Amazon Alexa and Google Assistant for convenient voice control.
- Link your Tuya/Smart Life account to your Amazon Alexa or Google Assistant app.
- Use voice commands such as "Alexa, turn on the kitchen lights" or "Hey Google, dim the bedroom light to 50%".
7. Maintenance
- Cleaning: Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: If storing the LED strip for an extended period, ensure it is unfolded and stored in a cool, dry place to prevent damage and overheating when next used.
8. Troubleshooting
- Light strip not turning on: Check all physical connections (strip to controller, controller to power adapter, power adapter to wall outlet). Ensure the power adapter is functioning.
- Cannot connect to Wi-Fi/App:
- Verify your Wi-Fi network is 2.4GHz. Separate 2.4GHz and 5GHz bands in your router settings if they are combined.
- Ensure your router's encryption mode is WPA2-PSK and authentication type is AES.
- Try resetting the device by pressing the on/off button 5 times to enter pairing mode again.
- Incompatible power source: The LED strip requires a DC24V power source. A 12V power source is incompatible and will not work.
- Extending the strip: It is generally not recommended to extend the strip beyond its original length without consulting the manufacturer or using a compatible, higher-wattage power supply. Overloading the power adapter can cause damage or fire hazards.
- Cutting the strip: LED strips can typically be cut at designated marks (often indicated by a scissor icon or copper pads). Cutting elsewhere may damage the strip and render it unusable.
9. User Tips
- For optimal app connectivity, ensure your router settings are configured to prioritize the 2.4GHz band for smart devices.
- Always unroll the entire LED strip before powering it on for testing or prolonged use to prevent heat buildup.
- When planning your installation, consider the flexibility of the silicone tube for bending, but avoid sharp folds that could damage the internal wiring.
- The IP67 waterproof rating means the strip is protected against temporary immersion in water, but the controller and power adapter are not. Ensure these components are kept dry.
10. Warranty and Support
For specific warranty information and technical support, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for download: User manual (PDF).