BAOFENG UV-17 PLUS V2

Contents

Baofeng UV-17 PLUS V2 Tri-Band Walkie Talkie

User Instruction Manual

1. Safety Information

Please read this manual carefully before using your Baofeng UV-17 PLUS V2 radio. Failure to follow these instructions may result in injury or damage to the device.

General Safety Warnings

  • WARNING! European Users should note that operation of this unit in Transmit mode requires the operator to have a valid Amateur Radio License from their respective Countries Amateur Radio Licensing Authority for the Frequencies and Transmitter Power levels that this Radio transmits on. Failure to comply may be unlawful and liable for prosecution.
  • ATTENTION! When programming the radio, start by reading the factory software data, and then rewrite this data with your frequency etc., to a new saved code plug, otherwise errors may occur.
  • ATTENTION! Before using this product, read the RF Energy Exposure and Product Safety Guide that ships with the radio which contains instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulation.
  • Do not operate the product in a location containing fuels, chemicals, explosive atmospheres, or other flammable or explosive materials.
  • Do not operate the product near any medical or electronic equipment that is vulnerable to RF signals.
  • Do not hold the product while driving.
  • Do not operate the product in any area where use of wireless communication equipment is completely prohibited.
  • Keep the product at least 2.5 centimeters away from your body during transmission.
  • For vehicles with an air bag, do not place the product in the area over the air bag or in the air bag deployment area.
  • Keep the product and its accessories out of reach of children and pets.
  • Handle the product with care. Do not disassemble, modify, or repair the product and its accessories without authorization.

Battery Safety Precautions

  • Do not charge or replace your battery in a location containing fuels, chemicals, explosive atmospheres, or other flammable or explosive materials.
  • Do not charge your battery that is wet. Dry it with a soft and clean cloth prior to charging.
  • Do not charge your battery suffering deformation, leakage, or overheating.
  • Do not charge your battery with an unauthorized charger.
  • Do not charge your battery in a location where strong radiation is present.
  • Overcharge shall always be prohibited as it may shorten the life of your battery.
  • Do not short the battery terminals or throw the battery into a fire.
  • Do not expose the battery to direct sunlight for a long time nor place it close to other heating sources.
  • Do not squeeze and penetrate the battery, nor remove its housing.

2. Package Contents

Carefully unpack the box and ensure all items are present and in good condition. If any item is missing or damaged, please contact your dealer.

  • 1x Baofeng UV-17 PLUS V2 Radio
  • 1x Antenna
  • 1x 4800mAh Li-ion Battery
  • 1x Belt Clip
  • 1x Desktop Charger
  • 1x USB Type-C Charging Cable
  • 1x User Manual (this document)
Baofeng UV-17 PLUS V2 radio and its accessories
Figure 1: Baofeng UV-17 PLUS V2 radio and included accessories.

3. Product Overview

The Baofeng UV-17 PLUS V2 is a high-power, tri-band two-way radio designed for reliable communication. It features a 1.77-inch LCD screen, Type-C charging, and robust construction.

Key Features

  • Tri-Band Operation: VHF (136-174MHz), 1.25M (220-260MHz), UHF (400-520MHz).
  • High Power Output: Up to 10 Watts for extended range.
  • Large Battery Capacity: 4800mAh Li-ion battery for long operating times.
  • Type-C Fast Charging: Convenient and quick charging.
  • NOAA Weather Channel: For weather alerts and information (US and Canada).
  • Wireless Copy Frequency: Easy pairing and channel configuration.
  • FM Radio: 65-108 MHz broadcast FM receiver.
  • Display: 1.77-inch TFT large screen with full keyboard.
  • Memory Channels: Up to 999 memory channels.
  • Durability: Water-proof and drop-proof design.
  • Additional Functions: Flashlight, VOX, Alarm, Scan Function, DTMF encoder.
Baofeng UV-17 PLUS V2 main features
Figure 2: Main features of the Baofeng UV-17 PLUS V2.

Radio Components and Controls

  1. Antenna
  2. Flashlight/Emergency Alert Key
  3. PTT (Push-To-Talk) Key
  4. FM Broadcast/Monitor Key
  5. MENU Key
  6. Numeric Keypad
  7. Power/Volume Knob
  8. Color LCD Display
  9. Accessory Jack
  10. MIC Input
  11. EXIT Key
  12. Up/Down Navigation Keys
  13. Battery Pack
  14. Type-C Charging Port
  15. Battery Tightening Screw
  16. Type-C Charging Indicator
  17. LED Flashlight
  18. TX/RX Status LED
Baofeng UV-17 PLUS V2 dimensions
Figure 3: Radio dimensions (135mm H x 61mm W x 39mm D, not including antenna).

4. Setup

4.1 Battery Installation and Charging

The Li-ion battery pack is not charged at the factory; please charge it before use. For optimal performance, fully charge and discharge the battery two or three times.

  1. Install Battery: Align the battery pack with the radio body and slide it upward until it clicks into place. To remove, press the battery release and slide it downward.
  2. Charge Battery: Connect the Type-C USB cable to the charging port on the battery and plug the other end into a power source. Alternatively, place the radio with the battery into the desktop charger. The LED indicator on the charger will show red during charging and turn green when fully charged.

Charging Time: Approximately 3 hours for a full charge via Type-C. Usable time is 3-5 days, standby time 7-10 days.

Type-C Fast Charger for Baofeng UV-17 PLUS V2
Figure 4: Type-C Fast Charger connection.
Battery compartment of Baofeng UV-17 PLUS V2
Figure 5: Battery compartment details.

4.2 Antenna Installation

Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure. To remove, turn counter-clockwise.

4.3 Belt Clip Installation

At the back of the radio, remove the two parallel screws mounted above the battery. Thread them through the holes on the belt clip and screw them back into the radio body. To remove, unscrew counter-clockwise.

4.4 Additional Speaker/Microphone (Optional)

Pry open the rubber MIC-Headset jack cover and then insert the Speaker/Microphone plug into the double jack.

5. Operating Instructions

5.1 Power On/Off

To turn the unit on, rotate the Volume/Power knob clockwise until you hear a

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.