1. Setup
1.1 Package Contents
Please verify that all components are present in your package:
- 1 x Aigo ICE400SE CPU Cooler
- 1 x Mounting Bracket Kit (for Intel and AMD sockets)
- 1 x Thermal Paste (Note: Thermal paste is included only for packages shipped from ES, RU, BR, US warehouses. Packages from China do not contain thermal paste due to airline restrictions on liquid transport.)

Figure 1: Package Contents
1.2 Compatibility
The Aigo ICE400SE CPU Cooler is compatible with a wide range of Intel and AMD CPU sockets:
- Intel Sockets: LGA 775, LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA1200, LGA 1700, LGA 2011, LGA 2011-3, LGA 2066
- AMD Sockets: Socket FM1, Socket FM2, Socket AM3, Socket AM5, Socket AM2, Socket AM2+, Socket FM2+, Socket AM3+, Socket FM2/FM2+, AM4
Important Compatibility Note:
- The cooler comes with an Intel mounting bracket. AMD motherboards typically come with their own cooler bracket. If your AMD motherboard does not have a cooler bracket, you will need to purchase one separately.
- This product does not include a specific LGA 2011 CPU bracket. If you have an LGA 2011v3 CPU, compatibility is ensured if you use your existing LGA 2011v3 CPU bracket.
1.3 Installation
The ICE400SE features a buckle-based installation system designed for ease and efficiency, saving users time during assembly.
- Prepare your CPU: Ensure your CPU is clean and free of old thermal paste.
- Apply thermal paste: Apply a small amount of thermal paste (if included or separately purchased) to the center of your CPU's integrated heat spreader (IHS).
- Attach the mounting bracket: Secure the appropriate mounting bracket to your motherboard according to your CPU socket type.
- Position the cooler: Carefully place the CPU cooler onto the CPU, aligning the heatpipes with the mounting points on the bracket.
- Secure the cooler: Use the provided screws and fasteners to firmly attach the cooler to the mounting bracket. Ensure even pressure is applied.
- Connect the fan: Plug the 3-pin fan connector into the designated CPU fan header on your motherboard.

Figure 2: Installation Components Overview

Figure 3: Convenient Buckle Installation
2. Operating
2.1 Fan Operation
The Aigo ICE400SE features a 90mm fan with a 7-leaf design, engineered to produce sufficient airflow for optimal thermal solution. The fan operates at a speed of 1800 ± 10% RPM, providing effective cooling while maintaining a low noise level of 21.05dBA.

Figure 4: Airflow Diagram
2.2 RGB Lighting
The fan is equipped with vibrant RGB lighting, reflecting a beautiful halo and illuminating your hardware. The lighting effects can be observed upon system power-on.
Video 1: Aigo ICE400SE RGB Lighting Demonstration

Figure 5: RGB Fan in Operation
3. Maintenance
3.1 Cleaning
To ensure optimal performance and longevity of your CPU cooler, regular cleaning is recommended:
- Dust Removal: Periodically use compressed air to blow dust out of the heatsink fins and fan blades. Ensure the fan is not spinning rapidly during this process to prevent damage.
- Fan Cleaning: For stubborn dust, gently wipe the fan blades with a soft, dry cloth.
3.2 Thermal Paste Reapplication
Thermal paste degrades over time, which can reduce cooling efficiency. It is recommended to reapply thermal paste every 1-2 years, or if you remove the cooler for any reason. Remember that thermal paste is not included in all packages, so ensure you have it on hand if needed.
4. Troubleshooting
4.1 Common Issues and Solutions
- Fan not spinning or no RGB lighting:
- Check if the 3-pin fan connector is securely plugged into the CPU fan header on the motherboard.
- Ensure your motherboard's BIOS/UEFI settings are configured to supply power to the CPU fan header.
- High CPU temperatures:
- Verify that the cooler is properly seated and making good contact with the CPU. Uneven pressure can lead to poor thermal transfer.
- Check if thermal paste was applied correctly and is evenly spread. Reapply if necessary.
- Ensure adequate airflow within your PC case.
- Confirm that your CPU is within the cooler's specified TDP (Thermal Design Power) limit of 160W.
- Installation difficulties with specific sockets (e.g., LGA 2011-3, AMD):
- Refer to the compatibility notes in Section 1.2. Ensure you have the correct mounting bracket for your specific motherboard and CPU socket. AMD motherboards require their native backplate/bracket.
5. Specifications
The Aigo ICE400SE Air CPU Cooler is designed for efficient and quiet performance. Key specifications are detailed below:

Figure 6: Product Dimensions and TDP
| Feature | Specification |
|---|---|
| Model | ICE400SE |
| Cooler Type | Tower |
| Product Dimension | 92mm (W) x 70mm (D) x 132mm (H) |
| Fan Dimension | 90mm x 90mm x 25mm |
| Heat Pipes | 4 units (Direct-Touched Copper Base) |
| Noise Level | 21.05dBA |
| Fan Speed | 1800 ± 10% RPM |
| Air Volume | 42 CFM |
| Air Pressure | 1.6 H2O |
| Rating Voltage | DC12V |
| Working Voltage | DC12V |
| Starting Voltage | 5V |
| Number of Fins | 38 |
| TDP | 160W |
| Power Interface | 3PIN |
| Fan Life | 100,000 hours |
| Bearing Type | Fluid Bearing |
| Blade Quantity | 7 |
| Material | Aluminum |
| Rated Current | 0.23A |
| Input Power | 2.76W |
| Certifications | CE, FCC, RoHS |

Figure 7: Direct-Touching Copper Base

Figure 8: Four Heatpipes Design for Enhanced Thermal Dissipation

Figure 9: Seven-Leaf Fan Design and 3-Pin Connector
6. User Tips
Based on common user inquiries and experiences, here are some helpful tips:
- AMD Motherboard Brackets: If you are installing on an AMD motherboard, ensure you have the necessary cooler bracket. AMD motherboards typically come with one, but if yours is missing, you will need to acquire it separately.
- LGA 2011/2011-3 Sockets: This cooler does not include a dedicated LGA 2011 bracket. If you have an LGA 2011v3 CPU, you must use your existing motherboard's LGA 2011v3 bracket for proper installation.
- Thermal Paste Availability: Be aware that thermal paste is not included in packages shipped directly from China due to international shipping regulations. Plan accordingly if you are ordering from these regions.
- Fan Connection: The fan uses a 3-pin connector. Ensure it is securely connected to the CPU_FAN header on your motherboard.
7. Warranty and Support
Aigo products are designed and manufactured to high-quality standards. The ICE400SE CPU Cooler is certified with CE, FCC, and RoHS, ensuring compliance with international safety and environmental standards.

Figure 10: Product Certifications
For any technical support, warranty claims, or further inquiries, please contact the official Aigo customer service or the retailer from whom you purchased the product. Keep your proof of purchase for warranty validation.