MANUALS+

Adult content warning

RETEKESS TD175P Wireless Restaurant Calling System User Manual

Why this warning: This page discusses adult sexual products and may include explicit descriptions or images.

Leave this page

RETEKESS TD175P

Contents

RETEKESS TD175P Wireless Restaurant Calling System User Manual

Model: TD175P

1. Introduction

The RETEKESS TD175P Wireless Restaurant Calling System is designed to streamline customer service in various hospitality environments such as restaurants, food trucks, cafes, and bars. This system includes a transmitter host with multiple charging slots and individual pagers, allowing for efficient customer notification. This manual provides detailed instructions for setup, operation, maintenance, and safety to ensure optimal performance and user experience.

RETEKESS TD175P Wireless Restaurant Calling System with 30 pagers

Figure 1: RETEKESS TD175P Wireless Restaurant Calling System

2. Safety Information

2.1 RF Energy Exposure and Product Safety Guide

ATTENTION!

Before using this device, please read this guide which contains important operating instructions for safe usage, control information and operational instructions for compliance with RF Energy Exposure limits in applicable national and international standards. User instructions should accompany the device when transferred to other users.

Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

IC Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

CE Compliance

HENAN ESHOW ELECTRONIC COMMERCE CO., LTD. declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at: www.retekess.com.

RF Safety Guidelines

This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum. To ensure compliance with established RF exposure limits:

  • Reduce the amount of time spent using your wireless device.
  • Increase the distance between wireless devices and your body.
  • Do not transmit more than the rated duty factor 50% of the time.

Turn off your radio in the following conditions:

  • Before entering any area with a potentially hazardous or explosive atmosphere.
  • Do not use any radio that has a damaged antenna.
  • Before removing or installing accessories.

Battery Safety

  • WARNING: KEEP NEW OR OLD USED BATTERIES OUT OF REACH OF CHILDREN.
  • If a battery leaks, do not allow the liquid to come into contact with skin or eyes.
  • If a radio or battery has been submerged in water, dry and clean it before use. Do not use heat sources like hair dryers or microwave ovens.
  • Charge batteries at 10°C~40°C. Charging below 0°C is prohibited.
  • Rechargeable batteries must be charged by adults or children at least 8 years old under adult supervision.
  • Unplug the charger from the AC outlet before maintenance or cleaning.
  • Do not disassemble the charger.

Adapter Safety

The plug of the adapter is considered a disconnect device. The socket-outlet shall be installed near the equipment and shall be easily accessible.

Choking Hazard

WARNING: CHOKING HAZARD - Small Parts. Not suitable for children under 3 years old.

3. Product Overview

3.1 Transmitter Host

The transmitter host features a keyboard for calling pagers and multiple charging slots. It has a 3-digit display and an external antenna for extended range.

Transmitter Host with Pagers

Figure 2: Transmitter Host with Pagers

3.2 Pagers

The system includes 30 compact pagers, each with a unique number label and charging contact ports. They are designed for easy handling and storage.

Individual Pager

Figure 3: Individual Pager

3.3 Key Features

  • Large-capacity 30 Pagers: The transmitter keyboard has 30 charging card slots, and additional menu cards can be continuously added to meet the needs of business growth.
  • Long Range: The TD175P wireless pager system can reach 500m (1640ft) in open areas, ensuring customer needs are heard.
  • Diagram showing 500m working distance in open area

    Figure 4: Long Working Distance

  • Multiple Prompt Modes: Pagers can vibrate, beep, or flash. Prompt modes can be combined as needed, and the duration can be set from 1-999 seconds.
  • Diagram of 7 prompt modes: Vibration, Buzzer, Flashing, Vibration+Flash, Vibration+Buzzer, Flash+Buzzer, Vibration+Flash+Buzzer

    Figure 5: 7 Prompt Modes

  • Expandable Capacity: The keypad transmitter can maximally work with 998 pagers, allowing for business growth.
  • Image showing adding up to 998 pagers to the system

    Figure 6: Expandable to 998 Pagers

  • Lightweight and Compact Design: The integrated design of the transmitter keyboard and charging slots saves space, ideal for small environments.
  • Dimensions of a pager: 95mm/3.74in, 11mm/0.43in, 51mm/2.01in. Transmitter: 286mm/11.26in, 210mm/8.27in, 31mm/1.22in

    Figure 7: Lightweight and Compact Design

  • Sensitive PC Touch Keyboard: Offers sensitive and comfortable operation, with ordinary life waterproof and splash-proof features, easy to clean with alcohol wipes.
  • Finger touching the keypad, highlighting 'Easy to clean'

    Figure 8: Sensitive PC Touch Keyboard

  • Adjustable Keypad Mode: Choose from Mute, Beep, Vibration, or Vibration+Beep modes to suit different environments.
  • Adjustable Keypad Mode options: Mute, Vibration, Buzzer, Buzzer + Vibration

    Figure 9: Adjustable Keypad Modes

  • Long Service Time: Each pager has a built-in 200mAh lithium battery, providing approximately 15 hours of standby time.
  • Pagers showing 15 hours standby time and 200mAh battery

    Figure 10: Long Service Time

  • One to Many/Many to One: Multiple pagers can use the same number and be called simultaneously. The system supports multiple transmitters with the same ID to call the same guest pager.
  • Diagram showing one transmitter calling multiple pagers with the same ID

    Figure 11: One to Many Calling

  • View History Call Records: Up to 10 call history records can be viewed through the keyboard's up and down keys.
  • Transmitter display showing call history records

    Figure 12: View History Call Records

  • One Key Shutdown: Enter the number 999 and press CALL to turn off all pagers at once.
  • Hand pressing 999 + CALL button for one key shutdown

    Figure 13: One Key Shutdown

4. Specifications

4.1 Transmitter Host Specifications (TD175P)

AttributeValue
Input powerDC 12V/2A
Case MaterialABS
Modulation modeOOK (AM)
Transmission frequency433.92MHz
Standby current50 mA
Transmit current300mA
Interaction modeTouch key
Key Definition0-9 numeric keys, up and down keys, exit key, call key, setting key
Configurable pager number1-998
Display3-digit red digital tube display
Communication distance500 meters (open air)
Charging slot30
Size286*210*31mm

4.2 Pager Specifications

AttributeValue
Extension size95*51*11mm
Case materialABS
Modulation modeOOK (AM)
Receiving frequency433.92Mhz
Receiving sensitivity-108dBm
BatteryBuilt-in 200mAh lithium battery
Standby current10mA
Alarm current90mA
Alert modeBuzzer/flashing light/vibration
Standby time15 hours (20h in PDF)
Communication distance500M (open distance)
Prompt duration1-999 seconds user-defined

4.3 Product Comparison (TD175S, TD175, TD175P)

Comparison table for TD175S, TD175, TD175P models

Figure 14: Comparison Table of TD175S, TD175, and TD175P

5. Setup

5.1 Preparation Before Use

  1. Ensure the antenna of the transmitting host is correctly connected to the antenna connector.
  2. Ensure the power supply is correctly plugged into the host connector.
  3. It is recommended to charge the pagers for ten minutes for the first use.

5.2 Power On

Insert the pager into a charging slot on the mainframe when it is in the off state, and the pager will turn on automatically. After taking out the pager, the indicator light flashes slowly to enter the standby state. At this time, you can call the paired pager through the transmitting host.

Video 1: Product Overview and Basic Operation

6. Operating Instructions

6.1 Pairing Code of Pager

  1. Long press the 'Setting' button for 3 seconds to open the function menu 'F1'. Click the 'Call' button. The menu charging indicator (2 LEDs) will go out, and the reminder light (4 LEDs) will be always on.
  2. The keypad base display window first shows '000' and then '001'. (The main unit display shows numbers in increasing order from 001 to 998; the user can also set the desired number).
  3. Take out the pager you want to set up (the 4 LEDs on the pager will light up) and click the 'Call' button.
  4. When you hear a long beep from the pager, it means the code pairing is successful. After the code pairing is completed, click the 'Exit' button to return to the 'F1' function menu.

Note:

  • Please make sure the pager is on the charging slot of the host before code pairing.
  • Complete the code pairing operation within 10 seconds after the pager is taken out. More than 10 seconds, the pager will automatically exit the code pairing mode.

6.2 Calling Pager

  1. When the main unit is in standby mode (screen displays 000), input the pager number using the numeric keypad.
  2. Click the 'Call' button. The pager will receive a call and emit a light, vibration, or chirp alert.

6.3 One-Touch Shutdown of the Pager

  1. When the main unit is in standby mode and pagers are inserted in the charging slots, click '999' in the digital area of the transmitter.
  2. Then click the 'Call' button. All the LEDs of the pager will turn off, indicating shutdown.

Note:

  • The pager needs to be coded before this function can take effect.

6.4 Function Setting

Press and hold the 'Setting' button for 3 seconds to open the function menu. Use the 'Up' button to select function menu 'F1-F4', then click 'Call' to enter the corresponding sub-menu and select the desired function.

MenuInstructionFunctional DescriptionOperating Instructions
F1New pager code pairingAs shown in the 'Code pairing operation' section.
F2000Launch host keyboard mute onAfter entering F2, when the transmitter host displays 000, press the call key and the host keypad mutes mode on.
001Transmitter host keypad audible feedback onAfter entering F2, when the transmitter host displays 001, press the call key and the host keypad turns on the sound feedback.
002Launch host keypad vibration feedback onAfter entering F2, when the transmitter host displays 002, press the call key and the host keypad turns on vibration feedback.
003Launch host keyboard sound + vibration feedback onAfter entering F2, when the transmitter host displays 003, press the call key and the host keypad turns on sound + vibration feedback.
004Pager audible alarm mode onAfter entering F2, when the transmitting main unit displays 004, press the call button and the pager sound alarm mode is turned on.
005Pager vibration alarm mode onAfter entering F2, when the transmitting main unit displays 005, press the call button and the pager vibration alarm mode is turned on.
006Pager flashing light alarm mode onAfter entering F2, when the transmitter host displays 006, press the call button and the pager flashing light alarm mode turns on.
007Pager sound + vibration alarm mode onAfter entering F2, when the transmitter host displays 007, press the call button, and the pager sound + vibration alarm mode will turn on.
008Pager vibration + flashing light alarm mode onAfter entering F2, when the transmitting host displays 008, press the call button and the pager vibration + flashing light alarm mode is turned on.
009Pager sound + flashing light alarm mode onAfter entering F2, when the transmitting host displays 009, press the call button and the pager sound + flashing light alarm mode turns on.
010Pager sound + vibration + flashing light alarm mode onAfter entering F2, when the transmitter host displays 010, press the call button and the pager sound + vibration + flashing light alarm mode is turned on.
011Pager audible medium speed alarm mode onAfter entering F2, when the transmitter host displays 011, press the call button and the pager sound medium speed alarm turns on.
012Pager audible quick alarm mode onAfter entering F2, when the transmitter host displays 012, press the call button and the pager sound fast alarm opens.
F3Pager Reminder Duration SettingAfter entering F3, the transmitter main unit displays 000, and you can set the reminder duration by directly inputting the number (1-999 seconds) on the keypad and then pressing the call button.
F4Launch Host ID ChangeAfter entering F4, press the call key, the host computer displays the current transmitter host ID number, enter 1-999 and press the call key for confirmation.

Note the instructions:

  1. Return key: you can return to the previous menu, and you can also undo what you have entered.
  2. Query key: you can query the last 10 call records in call mode, and the queried call records can be called again by pressing the call key directly. Function setting mode is the page turn key.
  3. After entering F2, commands can only be selected by page turn key.
  4. Before modifying the pager settings, you need to make sure that the menu has been coded.
  5. After modifying the transmitter ID, you need to re-code with the pager to call the menu using the transmitter.

7. Maintenance

7.1 Cleaning

  • The keyboard is easy to clean with alcohol wipes.
  • Attention: Regarding charging issues: When the pager does not charge, please clean the charging pin positions of the pager and base before attempting again!!!

8. Troubleshooting

If you encounter issues with the system, refer to the following common solutions:

  • Pagers not charging: Ensure the charging pins on both the pager and the base are clean and free from debris. Use a soft cloth and alcohol to clean them.
  • Pagers not responding: Verify that the pagers are properly paired with the transmitter. Re-pair if necessary. Check if the pagers are within the communication range.
  • Short pager standby time: Ensure pagers are fully charged before use. Check battery health; if significantly degraded, consider replacing the pager.

9. User Tips

  • For optimal range, ensure the transmitter's antenna is securely attached and positioned in an open area.
  • Regularly clean the charging contacts on both the pagers and the charging base to prevent charging issues.
  • Utilize the adjustable prompt modes (vibration, beep, flash) to best suit your environment, e.g., mute mode for quiet cafes.
  • Take advantage of the 'One Key Shutdown' feature (999 + CALL) at the end of the day to conserve pager battery life.
  • Periodically check the 'History Call Records' to ensure all customers have been attended to.

10. Warranty and Support

10.1 Warranty Information

Most new products carry a two-year manufacturer's warranty from the date of purchase. For warranty service, you will need to provide a receipt or proof of purchase from the actual seller for verification.

Exclusions from Warranty Coverage:

  • Any product damaged by accident.
  • Misuse or abuse of the product, or damage resulting from unauthorized alterations or repairs.
  • If the serial number has been altered, defaced, or removed.

10.2 Support

For assistance regarding repairs and service, please contact the seller where you purchased the product. You can also visit the official RETEKESS website for more information and support: www.retekess.com.

EU Importer: Germany Retevis Technology GmbH, Address: Uetzenacker 29, 38176 Wendeburg

11. Package Contents

The TD175P Wireless Restaurant Calling System package typically includes:

  • 1 x Transmitter Host
  • 30 x Pagers
  • 1 x Power Adapter (US/AU/EU/UK Optional)
  • 1 x Antenna
  • 1 x English User Manual (PDF reference: User manual (PDF))
Package contents: 1 Transmitter, 30 Pagers, 1 Adapter, 1 User Manual

Figure 15: Package Contents

12. Applications

The RETEKESS TD175P system is versatile and can be used in a variety of settings to improve service efficiency:

  • Restaurants
  • Food Trucks
  • Cafes
  • Bars
  • Food Courts
  • Clubs
Various application scenarios including restaurants, food trucks, cafes, food courts, clubs, and bars

Figure 16: Application Scenarios

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.