NINIVISION mvp-2solar802

Contents

O-Kam App Smart Solar 10X Zoom WIFI Security Camera User Manual

Model: mvp-2solar802 | Brand: NINIVISION

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your O-Kam App Smart Solar 10X Zoom WIFI Security Camera. This advanced surveillance camera offers 8MP 4K HD video, 10X digital zoom, PTZ control, color night vision, two-way audio, and AI human motion detection, all powered by a built-in rechargeable battery and a solar charging panel for continuous operation.

O-Kam App Smart Solar 10X Zoom WIFI Security Camera with solar panel and key features
O-Kam App Smart Solar 10X Zoom WIFI Security Camera with solar panel and key features.

2. Package Contents

Please verify that all items listed below are included in your package:

  • 1 × WIFI Camera
  • 1 × User Manual
  • 1 × Solar Panel
  • 1 × USB Cable
  • 1 × Mounting Screws Bag
Diagram showing camera components and package contents
Diagram illustrating the camera's components and the included package contents.

3. Product Overview

The mvp-2solar802 camera is designed for versatile indoor and outdoor surveillance. It features a dual-lens system for 8MP 4K HD resolution, a solar panel for continuous power, and robust weatherproofing.

3.1. Key Components

  • Dual Lenses: Two 4MP lenses combine for 8MP 4K HD video.
  • Solar Panel: Provides continuous charging for the built-in rechargeable battery.
  • Antennas: For stable WIFI connectivity (2.4Ghz).
  • PIR Sensor: For human motion detection.
  • LED Lights: For full-color night vision and alarm actions.
  • Microphone & Speaker: For two-way audio communication.
  • SD Card Slot: Supports up to 128G TF card for local storage.
  • Reset Button: Located near the SD card slot.
  • Charging Port: For initial charging or backup power.
Camera with solar panel, emphasizing battery powered and solar charging
The camera is powered by a built-in rechargeable battery and a solar charging panel.

4. Setup Guide

4.1. Initial Charging and SD Card Installation

  1. Before installation, ensure the camera's built-in battery is fully charged using the provided USB cable.
  2. Locate the SD card slot (refer to the product overview diagram). Carefully insert a TF card (up to 128GB) if local storage is desired.

4.2. App Installation and Network Connection

The camera operates with the O-Kam App, available for both Android and iOS devices.

  1. Turn on the camera: Press and hold the power button until the camera powers on.
  2. Download the O-Kam App: Scan the QR code provided in the physical user manual or search for "O-Kam App" in your device's app store. Download, register an account, and log in.
  3. Connect to Network: In the O-Kam App, follow the on-screen prompts to add a new device. Scan the QR code located on the camera itself to initiate the network connection process. Ensure your Wi-Fi network is 2.4GHz.
Three steps for easy network connection: Turn on camera, Scan QR for app, Scan QR on camera for network
Easy network connection process using the O-Kam App.

4.3. Mounting the Camera and Solar Panel

Choose a location that provides optimal sunlight exposure for the solar panel and a clear view for the camera. Use the provided mounting screws and bracket.

Camera with solar panel, highlighting IP66 Waterproof and weather resistance
The camera and solar panel are designed for outdoor use with IP66 weatherproof rating.

5. Operating Instructions

5.1. PTZ Control and 10X Zoom

Control the camera's pan (355° horizontally) and tilt (90° vertically) directly from the O-Kam App. The camera also supports 10X digital zoom to view details.

Product demonstration video showing physical features, solar charging, 10X zoom, PTZ control, two-way audio, auto tracking, IP66 waterproof, color night vision, IR night vision, multi-user remote access.
PTZ remote control via mobile app, with 355° horizontal and 90° vertical rotation
Remote PTZ control and 10X digital zoom via the O-Kam App.

5.2. Two-Way Audio

The built-in microphone and speaker allow for real-time two-way voice communication through the app. You can speak to visitors or deter intruders.

Camera with solar panel, showing two-way audio interaction via phone
Engage in two-way audio communication with the camera.

5.3. Night Vision Modes

The camera offers multiple night vision options:

  • IR Night Vision: Standard black and white night vision using infrared LEDs.
  • Full Color Night Vision: When the white LED lights are activated, the camera provides a colorful view at night.
Image illustrating different night vision modes: Day Vision, Night Vision (IR), Full Color Night Vision
Day Vision, IR Night Vision, and Full Color Night Vision capabilities.

5.4. AI Human Motion Detection & Auto Tracking

The camera can detect human movement and automatically track the person within its field of view. When a person enters the alarm area, the camera will capture an image and send an alarm notification to your O-Kam App.

Camera with solar panel, illustrating auto tracking of a person
The camera's auto-tracking feature follows detected human movement.
PIR Human Detection triggering an alarm notification on a phone
PIR Human Detection sends immediate alerts to your mobile device.

5.5. Remote Access and Storage

Access live video feeds and recorded footage from anywhere, anytime, using the O-Kam App on your smartphone or tablet. The camera supports both local storage (TF card up to 128GB) and cloud storage (subscription may be required).

Image illustrating multi-user remote access to the camera feed
Multiple users can access the camera feed remotely.

5.6. Video Compression

The camera utilizes advanced H.265 video compression, which offers improved efficiency over H.264. This means better image quality with lower bandwidth usage and reduced storage requirements.

Image comparing H.264 and H.265 video compression, highlighting H.265's efficiency
H.265 video compression provides higher quality with less storage and bandwidth.

6. Maintenance

6.1. Solar Panel Care

Ensure the solar panel is kept clean and free from obstructions (e.g., dirt, leaves, snow) to maximize charging efficiency. Periodically wipe the surface with a soft, damp cloth.

6.2. Camera Cleaning

Gently clean the camera lenses and housing with a soft, lint-free cloth. Avoid abrasive cleaners or harsh chemicals that could damage the surface or lens coating.

6.3. Firmware Updates

Regularly check the O-Kam App for available firmware updates to ensure optimal performance, security, and access to new features.

7. Troubleshooting

Q: The camera is not connecting to Wi-Fi.
A: Ensure your Wi-Fi network is 2.4GHz, as the camera does not support 5.0GHz Wi-Fi. Check that the camera is within range of your Wi-Fi router and that the Wi-Fi password is entered correctly in the O-Kam App. Try resetting the camera by pressing the reset button for approximately 5 seconds.
Q: The camera is not charging via the solar panel.
A: Verify that the solar panel is installed in a location with direct sunlight exposure for several hours a day. Clean the surface of the solar panel to remove any dirt or debris that might be blocking sunlight. Check the connection cable between the solar panel and the camera.
Q: I am experiencing slow video transmission or unclear images.
A: This could be due to a weak Wi-Fi signal or network congestion. Try moving the camera closer to your Wi-Fi router or reducing the number of devices connected to your network. The camera uses H.265 compression for efficient streaming, but a poor network connection can still affect performance.
Q: The camera is not detecting motion or sending alerts.
A: Check the motion detection settings in the O-Kam App to ensure they are enabled and configured correctly. Adjust the sensitivity settings if necessary. Ensure there are no physical obstructions blocking the camera's view or the PIR sensor.

8. User Tips

  • Optimize Solar Charging: Position the solar panel to receive maximum direct sunlight throughout the day, especially during peak hours, to ensure continuous power and minimize reliance on battery-only operation.
  • Understand SKU Differences: When purchasing, note that different price points often correspond to varying TF card storage capacities (e.g., no SD card, 32GB, 64GB, 128GB). Choose the option that best suits your storage needs.
  • Regular App Checks: Periodically open the O-Kam App to check camera status, battery level, and review recorded events, even if you haven't received alerts.
  • Secure Your Account: Utilize the app's privacy encryption features, such as mobile phone and email binding, to enhance the security of your camera account.

9. Specifications

FeatureSpecification
Brand NameNINIVISION
Model Numbermvp-2solar802
Lens QuantityDual Lens
Megapixels8MP (4K HD)
Zoom10X Digital Zoom
Zoom TypeDigital zoom
SensorCMOS
Sensor BrandSony
ConnectivityIP/Network Wireless (2.4Ghz WIFI)
High Definition5.0 Megapixels
StyleBox Camera / 5MP Solar WIFI IP Camera
Audio OutputTwo Way Audio (Built-in speaker)
TF Card SupportMax support 128G SD
Internal Storage128G (Max support)
ColorWHITE
Shell MaterialPlastic
Power ModeBattery Powered
Rechargeable BatteryBuilt in
IP RatingIP66
Special FeaturesWaterproof / Weatherproof
IR Distance50M (40-50 meters)
Minimum Illumination0.01 Lux (0.01LUX)
Viewing Angle360°
Lens (mm)2mm
Power Supply (V)DC 12V
Power Consumption (W)3W / 5W
Video Compression FormatH.265
AI FunctionsMotion Detection, Human Motion, Auto tracking
Color Night VisionYes (Support)
Alarm ActionFTP Photo, Telefon Alarm, Email Photo, Local Alarm, Alarm Push
Supported Mobile SystemsAndroid, iOS
Supported Operating SystemsWindows 7, macOS, Windows 8, Windows 10, Windows 2008
APPO-Kam App for iOS and Android
Reset ButtonYes (Press About 5 Seconds)
Cloud StorageNeed to pay extra (3-day loop cloud storage is permanently free)
CertificationCE, FCC, RoHS

10. Warranty and Support

10.1. Warranty Information

This product is warranted against defects in workmanship and material for a period of 3 years from its original purchase date. Any unit proving defective during this period will be repaired without charge for parts or replaced. The end user is responsible for all freight charges incurred to send products to the repair center. The warranty does not cover incidental, accidental, or consequential damages arising from use, nor any costs associated with fitting or removal by a tradesman or other person. This warranty applies only to the original purchaser and is not transferable.

10.2. Technical Support

For any product or service issues, please contact the seller or refer to the O-Kam App for further assistance.

Certifications (CE, FCC, RoHS) and factory images
Product certifications and manufacturing details.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.