1. Introduction
The ANDELI TIG-250MPC is a versatile 3-in-1 welding machine designed for High-Frequency TIG (HF TIG), MMA (Stick) welding, and a specialized CLEAN function. It features dual voltage compatibility (110V/220V) and a smart pulse inverter technology, making it suitable for various welding tasks on different materials. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your welding machine.

2. Safety Instructions
WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.
- Always wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
- Ensure adequate ventilation in the work area to avoid inhaling welding fumes.
- Protect bystanders from arc rays and hot metal.
- Do not weld near flammable materials or in explosive atmospheres.
- Ensure the welding machine is properly grounded.
- Disconnect power before performing any maintenance or service.
- Do not touch live electrical parts.
- Read and understand all instructions in this manual before operating the machine.
3. Package Contents
Verify that all items are present in the package:
- ANDELI TIG-250MPC Welding Machine
- WP-17 TIG Torch
- Electrode Holder (for MMA welding)
- Ground Clamp
- Consumables (nozzles, collets, collet bodies, long back cap)
- User Manual (this document)

4. Product Overview
The TIG-250MPC features a super large LED panel display for easy parameter setting and monitoring. It integrates advanced MCU chip control and Module IGBT output for stable performance and durability.

4.1. Control Panel Functions

- A: Button to switch parameters: Used to cycle through adjustable welding parameters.
- B: Button to select the weld function: Toggles between TIG, MMA, and CLEAN modes.
- C: Rotate button to adjust the parameter size: Used to increase or decrease the value of the selected parameter.
- D: Bonding current: Adjusts the initial current for arc starting.
- E: TIG interval: Sets the pulse interval for Pulse TIG welding.
- F: Afterflow time: Controls the gas post-flow duration to protect the weld puddle and tungsten electrode.
- G: Peak current (pulse mode): Adjusts the higher current level during pulse welding.
- H: Store and switch to the next channel: Saves current settings and moves to the next memory channel.
- I: Welding rod diameter selection: For MMA mode, selects the appropriate welding rod diameter.
- J: Overcurrent protection lamp: Illuminates if an overcurrent condition occurs.
- K: Anti-overheating indicator light: Illuminates if the machine overheats.
4.2. Internal Components
The TIG-250MPC is built with robust internal components for reliable operation:
- Self-developed MCU chip control: Provides precise control over welding parameters.
- Module IGBT output: Ensures sufficient power and enhanced durability.

5. Setup
5.1. Power Connection
The TIG-250MPC supports dual voltage input (110V/220V). Ensure the correct power cable is used and connected to a suitable power outlet with proper grounding. The machine automatically detects the input voltage.
5.2. Gas Connection (for TIG Welding)
- Connect the gas hose from your inert gas cylinder (e.g., Argon) to the gas inlet on the rear of the welding machine.
- Ensure all connections are tight to prevent gas leaks.
- Open the gas cylinder valve and set the gas flow rate on the regulator according to your welding requirements (typically 10-15 L/min for TIG).
5.3. TIG Torch Connection
Connect the WP-17 TIG torch to the appropriate port on the front panel of the machine. Ensure the gas line and power cable from the torch are securely connected.

5.4. Electrode Holder / Ground Clamp Connection
- For TIG Welding: Connect the ground clamp to the workpiece.
- For MMA (Stick) Welding: Connect the electrode holder to the positive (+) terminal and the ground clamp to the negative (-) terminal (or vice-versa depending on electrode polarity requirements).
6. Operating Modes
The TIG-250MPC offers TIG, MMA, and CLEAN welding modes. Use button 'B' on the control panel to select the desired mode.
6.1. TIG Welding (HF TIG / Pulse TIG / Hot TIG)
TIG welding provides precise control and high-quality welds, especially on thin materials. The machine features High-Frequency (HF) arc starting, eliminating the need for scratch starting.
- HF TIG: Provides easy arc ignition without touching the workpiece.
- Pulse TIG: Ideal for welding thin materials or when heat input needs to be controlled. Adjust 'TIG interval' (E) and 'Peak current' (G) for pulse settings.
- Hot TIG: Suitable for welding sheet plates from 0.8mm to 8mm.
Parameter Adjustment for TIG:
- Select TIG mode using button 'B'.
- Use button 'A' to cycle through adjustable parameters (e.g., welding current, pulse frequency, afterflow time).
- Rotate button 'C' to adjust the value of the selected parameter.
- The LED panel displays the current settings.
Pre-Flow Adjustable:
The machine allows adjustment of the gas pre-flow time, which helps to purge air from the torch and protect the weld area before the arc starts. This is crucial for preventing contamination.
Recommended Parameters (Spot Welding):
The machine comes with 6 groups of customizable parameters (C0-C5) and 4 groups of internally set recommended parameters (C6-C9) for spot welding different workpiece thicknesses. Press the 'STORAGE' button (H) to switch between channels.
| Channels | Parameter Description |
|---|---|
| C0-C5 | User-defined settings |
| C6 | D0.4 spot welding 0.4mm workpiece |
| C7 | D0.8 spot welding 0.8mm workpiece |
| C8 | D1.5 spot welding 1.5mm workpiece |
| C9 | D3.0 spot welding 3.0mm workpiece |



6.2. MMA (Stick) Welding
MMA welding is suitable for a wide range of applications and materials, especially in outdoor or less controlled environments.
Parameter Adjustment for MMA:
- Select MMA mode using button 'B'.
- Use button 'A' to cycle through adjustable parameters (e.g., welding current, hot start, arc force).
- Rotate button 'C' to adjust the value of the selected parameter.
- Select the appropriate welding rod diameter using the dedicated setting (I). The machine supports welding with 3.2mm welding rods.
6.3. CLEAN Function
The CLEAN function is designed to prepare the welding surface by removing oxides and contaminants, which is particularly useful for aluminum welding or when working with dirty materials. This function can be set by one click on the LED panel.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is disconnected from power before cleaning.
- Cable Inspection: Regularly inspect all welding cables, torch, and ground clamp for damage, cuts, or loose connections. Replace damaged components immediately.
- TIG Torch Maintenance: Inspect the TIG torch consumables (tungsten electrode, collet, collet body, nozzle) for wear and tear. Replace as needed to maintain arc quality.
- Storage: Store the welding machine in a clean, dry environment, away from excessive dust, moisture, and corrosive materials.
The machine features a full air duct ventilation system to help dissipate heat and allow for extended operation.
8. Troubleshooting
This section addresses common issues you might encounter. For problems not listed here, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on | No power supply; Faulty power cable; Internal fault | Check power connection and circuit breaker; Inspect power cable; Contact support. |
| No arc / Weak arc | Poor ground connection; Incorrect current setting; Damaged torch/electrode holder; Incorrect gas flow (TIG) | Ensure good ground contact; Adjust current; Inspect/replace cables/torch; Check gas supply and flow rate. |
| Overcurrent protection lamp (J) illuminates | Excessive current draw; Short circuit | Reduce welding current; Check for short circuits in cables/torch; Allow machine to cool. |
| Anti-overheating indicator light (K) illuminates | Machine overheated due to prolonged use or poor ventilation | Stop welding and allow the machine to cool down; Ensure proper ventilation around the machine. |
| Poor weld quality (TIG) | Incorrect gas flow; Contaminated tungsten; Improper technique; Dirty workpiece | Adjust gas flow; Clean/replace tungsten; Review welding technique; Clean workpiece thoroughly. |
9. Specifications
Technical specifications for the ANDELI TIG-250MPC welding machine:
| Parameter | TIG-250MPC (1PH 110V±15%, 50/60Hz) | TIG-250MPC (1PH 220V±15%, 50/60Hz) | ||
|---|---|---|---|---|
| MMA | TIG | MMA | TIG | |
| Rated input power (KVA) | 4.8 | 3.8 | 6 | 5.1 |
| Rated input current (A) | 43 | 34 | 27 | 23 |
| No-load voltage (V) | 56V | |||
| Output current (A) | 20-130 | 20-160 | 20-160 | 20-200 |
| Rated Output | 130A/25.2V | 160A/16.4V | 160A/26.4V | 200A/18V |
| Rated duty cycle (%) | 40% | |||
| Efficiency (%) | 70 | |||
| Insulation Class | F | |||
| Protection Class | IP21 | |||
| Weight (Kg) | 5 | |||
| Dimension (mm) | 396*142*268 | |||


10. User Tips
- Foot Pedal Compatibility: The ANDELI TIG-250MPC welding machine does not support the addition of a foot pedal for control. All parameter adjustments and arc initiation are managed via the control panel and torch trigger.
- Beginner-Friendly: The large LED panel and pre-set parameters (C6-C9 for spot welding) make this machine a good choice for beginners, simplifying the setup for common tasks.
- Material Preparation: Always ensure your workpiece is clean and free of rust, paint, or oil for the best welding results, especially with TIG.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official ANDELI website. Keep your purchase receipt as proof of purchase.